Document Number: 31511
Revision 06-Aug-02
www.vishay.com
40
MDP 14, 16
Vishay Dale
For Technical Questions, contact: ff2aresistors@vishay.com
FEATURES
• 0.160" [4.06mm] maximum seated height and rugged,
molded case construction.
• Highly stable thick film
• Low temperature coefficient (- 55°C to + 125°C)
± 100ppm/°C
• Reduces total assembly costs
• Compatible with automatic inserting equipment
• Wide resistance range
• Uniform performance characteristics
• Available in tube pack
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
01
03
SCHEMATIC
01 and 03 Schematics
ORDERING INFORMATION
EXAMPLE:
MDP14-05-221/271G = A 14 pin dual-in-line thick film
resistor network with 12 series pair of resistors of 220 ohm
and 270 ohm per pair and a tolerance of ± 2%.
EXAMPLE:
MDP14-03-101G = A dual-in-line thick film resistor network
with 14 pins on 0.100" [2.54mm] centers, 03 Schematic,
resistance of 100 ohm and a tolerance of ± 2%.
14
NUMBER OF PINS 101
RESISTANCE VALUE
05
SCHEMATIC 221
RESISTANCE VALUE R1
271
RESISTANCE VALUE R2
05 Schematic
First two digits (3 for "F" tolerance) are significant
figures. The last digit specifies the number
of zeros to follow.
First 2 digits (3 for "F"
tolerance) are significant
figures. Last digit
specifies number of zeros
to follow.
G
TOLERANCE
F = ± 1%
G= ± 2%
J = ± 5%
MDP
MODEL
MDP
MODEL 14
NUMBER OF PINS G
TOLERANCE
STANDARD ELECTRICAL SPECIFICATIONS
MODEL/ SCHEMATIC RESISTOR RESISTANCE STANDARD TEMPERATURE TCR WEIGHT
NO. OF POWER RATING RANGE TOLERANCE COEFFICIENT TRACKING**
PINS Max. @ 70°C* (- 55°C to + 125°C) (- 55°C to + 125°C)
WΩ% ppm/°C ppm/°Cg
MDP 14 01 0.125 10 - 2.2M ± 1, ± 2, ± 5 ± 100 ± 50 1.3
03 0.250 10 - 2.2M ± 1, ± 2, ± 5 ± 50
05 0.125 Consult factory ± 1, ± 2, ± 5 ± 100
MDP 16 01 0.125 10 - 2.2M ± 1, ± 2, ± 5 ± 100 ± 50 1.5
03 0.250 10 - 2.2M ± 1, ± 2, ± 5 ± 50
05 0.125 Consult factory ± 1, ± 2, ± 5 ± 100
* For resistor power ratings @ + 25°C see derating curves.
** Tighter tracking available
F = ± 1%
G= ± 2%
J = ± 5%
www.vishay.com
41
MDP 14, 16
Vishay Dale
Document Number: 31511
Revision 06-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com
0.010 + 0.005
- 0.002
[0.254 + 0.127
- 0.051]
0.250 ± 0.005
[6.35 ± 0.127]
0.310 ± 0.010
[7.87 ± 0.254]
0.290 Min.
0.320 Nom.
0.360 Max.
[7.37 Min.
8.13 Nom.
9.14 Max.]
Pin #1
Non-Accumulative Tol.
"C" Spaces
A ± 0.010 [0.254]
0.030
[0.762] Typ.
0.100 ± 0.010
[2.54 ± 0.254]
0.075 ± 0.015
[1.90 ± 0.381]
0.120 ± 0.005
[3.05 ± 0.127]
0.130 + 0.015
- 0.010
[3.30 + 0.381
- 0.254]
0.050 ± 0.005
[1.27 ± 0.127]
0.018 ± 0.003
[0.457 ± 0.076]
B ± 0.010 [0.254]
DIMENSIONS in inches [millimeters]
Pin #1
Identification
MODEL
MDP 14
MDP 16
B
0.600 [15.24]
0.700 [17.78]
C
6
7
Thick Film Resistor Networks, DIP, Molded
Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215.
Solderability: Per MIL-STD-202, Method 208E.
Body: Molded epoxy.
Terminals: Copper alloy, tin-lead plated.
Weight: 14 pin = 1.3 grams; 16 pin = 1.5 grams
PARAMETER UNIT MDP-14 MDP-16
Package Power Rating (Maximum at + 70°C) W 1.73 1.92
Voltage Coefficient of Resistance Veff < 50ppm typical
Dielectric Strength VAC 200
Insulation Resistance Ω> 10,000M minimum
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range: °C - 55 to + 150
TECHNICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
A
0.750 [19.05]
0.850 [21.59]
Document Number: 31511
Revision 06-Aug-02
www.vishay.com
42
MDP 14, 16
Vishay Dale
For Technical Questions, contact: ff2aresistors@vishay.com
•••••
•
••
13 and 15 resistors with one pin common
The MDPXX-01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and
a discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• "Wired OR" Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallel Pull-up
7 and 8 isolated resistors
The MDPXX-03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Powergate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
TTL dual-line terminator; pulse squaring
The MDPXX-05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
Pin #1
MDP14-05, MDP16-05
MDP16-03
MDP14-01
MDP16-01
01 Schematic
05 Schematic
03 Schematic
CIRCUIT APPLICATIONS
MDP14-03
Pin #1
Pin #1
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2R2R2
R1 R1 R1 R1 R1 R1 R1
R2
R2
R2 R2 R2 R2 R2
Thick Film Resistor Networks, DIP, Molded
Standard E-24 resistance values stocked. Consult factory
16 Pin Package
14 Pin Package
Single Resistor
03
01 and 05
3.00
2.70
0.380
0.190
- 50 + 25 + 70 + 125 + 150
Power Rating (Watts)
Derating Ambient Temperature °C
www.vishay.com
43
MDP 14, 16
Vishay Dale
Document Number: 31511
Revision 06-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
Thick Film Resistor Networks, DIP, Molded
MAX. ∆R
(Typical Test Lots)
± 0.50% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 1.00% ∆R
± 0.25% ∆R
—
—
CONDITIONS
1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours
± 4 hours at + 25°C ambient temperature
5 cycles between - 65°C and + 125°C
2.5 x rated working voltage 5 seconds
45 minutes at full rated working voltage at - 65°C
240 hours with humidity ranging from 80% RH to 98% RH
Leads immersed in + 350°C solder to within 1/16" of device body for 3
seconds
Total of 18 shocks at 100 G's
12 hours at maximum of 20 G's between 10 and 2,000 Hz
1000 hours at + 70°C, rated power applied 1.5 hours “ON, 0.5 hour “OFF” for
full 1000 hour period. Derated according to the curve.
4.5 pound pull for 30 seconds
10,000 Megohm (minimum)
No evidence of arcing or damage (200 VRMS for 1 minute)
