P9061000110000PA - Schaevitz Sensors

156

Internet: www.schaevitz.com North America Tel: 800/745-8008

Fax Back System: 916/431-6541 Europe Tel: (01753) 537622

Features

❏Guaranteed accuracy of less than ±0.08%

F.R.O.

❏Intrinsically safe option to class EEx ia IIc T4

(Tamb=60°C) BASEEFA CENELEC EN50-020

❏Rugged stainless steel construction

❏Pressure ranges: 0-75 psi to 10,000 psi (0 - 5

bar to 0 - 700 bar)

❏5x overload capacity

❏IP67, NEMA 4x rated

❏Long term stability 0.1% F.R.O. per annum

❏Thermal performance: <0.002% F.R.O./°F

(<0.004% F.R.O./°C)

❏Select models are CE certified

Applications

❏Hydraulic and pneumatic controls

❏Steel and aluminum rolling mills

❏Pulp and paper mills

❏Automotive test stands

❏Power generation

❏Off-shore oil exploration

The new P9000 Series is the latest addition to the

Schaevitz™ family of advanced digitally compensated

pressure transducers. The unique design of the P9000

pressure transducer utilizes the proven reliability of strain

gauge technology and innovative digital compensation

electronics. The synergy of these technologies result in an

instrument grade pressure transducer with the highest level

of performance offered by Lucas Control Systems,

Schaevitz Sensors. Available in pressure ranges from 75 psi

to 10,000 psi (5 bar to 700 bar), the P9000 series can be

configured with a variety of pressure ports, electrical

outputs, and termination options to meet most pressure

sensing needs.

The P9000 Series incorporates 12 bit digital compensation

electronics to ensure precise calibration of all critical

parameters. This unique circuit design also provides a

significant advantage of maintaining a true analog “thru-

path” resulting in an exceptionally fast response of 1000

Hz without a sacrifice in accuracy. Error contribution

sources are digitally corrected to guarantee repeatable

performance and eliminate the need for user calibration.

Combined nonlinearity hysteresis and non-repeatability

errors are guaranteed to be less than ±0.08% F.R.O. with

total thermal error limited to 0.004% F.R.O/°C over an

extended industrial temperature range of -4°F to 185°F

(-20°C to 85°C).

The P9000 series delivers the advantages of a 17-4 PH

diaphragm offering a true stainless steel isolation barrier

with high burst pressures, at 20x the rated pressure, and a

proof pressure, up to 5x the rated pressure. Housed in a

rugged 316 stainless steel, NEMA 4X, IP67 enclosure with

guaranteed shock resistance of up to 1000g for 2msec, and

vibration to ±20g, the P9000 provides a robust solution for

a wide variety of demanding pressure applications and

environments.

Available in both cable and connector outlets, the P9000 is

offered in various electronic outputs: four wire 0-10 V,

four wire 0 to 5 V and a 2 wire 4-20 mA intrinsically safe

certified version. The P9000 can be configured to give 3

wire 1 to 6V or 1 to 11V output. All P9000 units are

constructed under an ISO 9001 environment. Each unit is

serialized and shipped with a calibration certificate

guaranteeing the highest quality and reliability found in an

instrument grade pressure transducer.

Digitally Compensated Pr essur e Transducer

P9000 Series

157

Common Specifications (all specifications are at 20°C unless otherwise noted)

Pressure Ranges

High psi.................. 0-75; 100; 150; 200; 250; 350; 500; 750; 1000; 1500; 2200; 2500; 3500; 5000; 7500; 10,000

bar................. 0-5; 7; 10; 15; 20; 25; 35; 50; 70; 100; 150; 200; 250; 350; 500; 700

Pressure References

High Pressure Range .... Vented gauge3: 0-75 to 0-350 psi

Absolute and sealed gauge: 0-75 to 0-10,000 psi

Pressure Limit ................... 5x full range scale pressure or 12,000 psi (830 bar), whichever is less

Burst Pressure................... 20 x rated pressure range or 22,000 psi (1500 bar), whichever is less

Pressure Media ................. Liquids or gases compatible with 17-4 PH and 17-7 PH stainless steel

Temperature Range

Operable ........................ -40°F to 212°F (-40°C to 100°C)

Compensated................. -4°F to 176°F (-20°C to 80°C)

Storage ........................... -40°F to 257°F (-40°C to 125°C)

Humidity

Connector Version........ 95% Relative Humidity

Cable Version ................ Immersible to IP67 (fluid must not enter ends of cables)

Vibration............................ Surpasses MIL STD 810C Method 514-2 Curve L

Shock ................................. 1000g for 2 msec will not damage sensor

Insulation Resistance ....... 500 Mohm at 50 VDC

Long Term Drift................ <0.1% F.R.O./year (<0.25% F.R.O. for first 6 months)

EMC ................................... CE Approved

The P9060, P9070 and P9080 Series when correctly installed comply with the EMC Directive

89/336/EEC Generic Standards for Residential Commercial, Light Industrial and Industrial

environments. Note: The Industrial environment cannot be complied with when the P9080

series is used in Intrinsic Safety applications where only one earth connection is made.

3Vented gauge units must only be used in dry, noncorrosive environments and will breathe through the cable vent tube

or hole in the 6-way receptacle.

Specifications by Model (All specifications are at 20°C unless otherwise noted)

Series P9060 P9070 P90801

Model Numbers P9061/4 P9071/4 P9081/4

Input Voltage 10 to 36 VDC 15 to 36 VDC 10 to 36 VDC

Current (mA) max < 6 < 6 N/A

Output (F.R.O.) 5 V ± 0.3% 10 V ± 0.3% 4-20 mA (16 mA ± 0.3%)

Impedance (ohms) <1 <1 —

Load Resistance (Ohms Min.) 1000 2000 1300 max at 36 V

Frequency Response 1 kHz 1 kHz 1 kHz

Combined Nonlinearity, Hysteresis and Nonrepeatability

High Range % F.R.O. (BSL) <±0.05 typ <±0.05 typ <±0.05 typ

<±0.08% max

Combined Thermal Zero & Sensitivity Error: (calculated from end points of temp. range)

The output will not deviate from 20°C by more then 0.5% F.R.O., over a temperature range of -20 to +80°C.

% F.R.O./°F <±0.002 <±0.002 <±0.002

% F.R.O./°C <±0.004 <±0.004 <±0.004

Residual Unbalance % F.R.O. <±0.3 <±0.3 <±0.3

Weight oz (gm) max (0001 version)

Connector Version 5.11 (145) 5.11 (145) 5.11 (145)

Cable Version 6.35 (180) 6.35 (180) 5.64 (160)

1Model P9080 is registered as an intrinsically safe transducer to Class ia IIc T4 BASEEFA, Cenelec EN50 - 020.

P9000 Series Foil Strain Gauge

Pressure Ranges: 0-75 to 0-10,000 psi

(0-5 to 0-700 bar)

Nonlinearity: <±0.08% F.R.O.

Select P9000 models, when correctly installed, are CE certified to

comply with the EMC Directive 89/336/EEC Generic Standards for

Residential, Commercial, Light Industrial and Industrial Environments.

158

Internet: www.schaevitz.com North America Tel: 800/745-8008

Fax Back System: 916/431-6541 Europe Tel: (01753) 537622

Dimensions in (mm)

P9000 Series

Advanced Digitally Compensated Pr essure Transducer

Connector Orientation

Connections

Cable Connector**

Red* Pin A* Excitation (+)

White Pin D Excitation (-)

Yellow Pin B Output (+)

Blue* Pin C* Output (-)

Violet Pin E No connection

Grey Pin F Factory use only

Note: Screen is connected to the case for CE marked units. Screen

is not connected to the case for optional IS units (P9080). IS

certification revokes CE certification.

* 2-wire connections (max cable length 50 meters when IS)

**Vented gauge units must breathe through the receptacle (mating

connector must have a vent hole)

Adapters Code Dimensions in (mm)

Thread Size Welded A B

G1/4A (BSP) (M) 0002 0.46 (11.7) 0.67 (16.9)

M14 x 1.5 (M) 0003 0.40 (10.2) 0.61 (15.4)

7/16"-20UNF-2A (M) 0004 0.56 (14.3) 0.77 (19.5)

1/4"-18NPT (M) 0005 0.55 (14.0) 0.76 (19.2)

M10 x 1.0 (F) 0006 — 0.60 (15.2)

Thread Size Screwed A B

G1/4A (BSP) (M) 0022 0.46 (11.7) 0.70 (17.8)

M14 x 1.5 (M) 0023 0.40 (10.2) 0.62 (15.8)

7/16"-20UNF-2A (M) 0024 0.56 (14.3) 0.78 (19.8)

1/4"-18NPT (M) 0025 0.55 (14.0) 0.80 (20.4)

M10 x 1.0 (M) 0026 — 0.60 (15.2)

Adaptor, Screwed

Adaptor, Welded

0.67

(17.0)

A/F

Bonded Seal

Connector

Orientation

A & SG.VG.

Connector Outlet

(P90X3-XXXX)

Thread G1/4B [BSP]

x 0.55 (14.0) Deep

0.756

(19.2)

A/F

Ø1.00

(25.4)

0.51

(13.0)

3.50 (89.0) 75-750 psi

3.562 (90.5) 751-10,000 psi

39.37

(1M)

Standard

(P90X1-XXXX)

159

P9000 Series Foil Strain Gauge

Pressure Ranges: 0-75 to 0-10,000 psi

(0-5 to 0-700 bar)

Nonlinearity: <±0.08% F.R.O.

How to Order

Specify by transducer excitation, electrical interface, pressure

port, pressure range, units, and pressure reference. Example:

P9061-0005-10 BA signifies a pressure transducer with 0 to 5

VDC output operating from 10-36V, cable outlet and 1/4

inch-18 NPT male pressure port, pressure range of 0 to 10

bar, with an absolute pressure reference.

Model Number Code P90 0

Input/Output

6 – 0 to 5 V output (10 to 32 V supply)

7– 0 to 10 V output (15 to 36 V supply)

8 – 4-20 mA output (10-36 V supply)

Cable/Connector

(Please reference to selected pressure range)

1 – High Range – cable outlet

3 – High Range – connector outlet

Unit

B: bar

P: psi

Pressure Reference

A: absolute

SG: sealed gauge

VG: vented gauge

Unit

0 – Welded Adapter

2 – Screw in Adapter

Pressure Range

(Enter full scale pressure range

without units)

High (psi) 0-75; 100; 150; 200; 250;

350; 500; 750; 1000;

1500; 2200; 2500; 3500;

5000; 7500; 10,000

(bar) 0-5; 7; 10; 15; 20; 25; 35;

50; 70; 100; 150; 200;

250; 350; 500; 700

Pressure Port

1 – 1/4 in BSP female

2 – 1/4 in BSP male

3 – M14 x 1.5 male

4 – 7/16 in 20 UNF 2A male

5 – 1/4 in 18 NPT male

6 – M10 x 1 female

Wiring

Corrosion resistant pressure transducers are

available with wetted parts manufactured from

Inconel 625 – consult factory for specifications.

B Yellow

C Blue

Output +Ve

Output

A Red

D White

E Violet

F Grey

Excitation +Ve

Excitation

Pin E – No connection

Pin F – Factory use only

C Blue

Output +Ve

Output

A Red

P9061/3 and 9071/3 P9081/3

Select P9000 models, when correctly installed, are CE certified to

comply with the EMC Directive 89/336/EEC Generic Standards for

Residential, Commercial, Light Industrial and Industrial Environments.

Intrinsic Safety

0 – Non IS

9 – IS (P9080 only)