Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz FREQUENCY DIVIDERS & DETECTORS - SMT 6 Typical Applications Features This Phase Frequency Detector is a key component in low phase noise frequency synthesis applications such as: * Point-to-Point Radios Ultra Low SSB Phase Noise Floor: -153 dBc/Hz @ 10 kHz offset @ 100 MHz Input up to 1300 MHz Fin. * Satellite Communication Systems Open Collector Output Buffer Amplifiers * Military Applications QSOP16G SMT Package: 29.4 mm2 Differential Input/Single Ended Output * Sonet Clock Generation Functional Diagram General Description The HMC439QS16G & HMC439QS16GE are digital phase-frequency detectors intended for use in low noise phase-locked loop applications for inputs from 10 to 1300 MHz. Its combination of high frequency of operation along with its ultra low phase noise floor make possible synthesizers with wide loop bandwidth and low N resulting in fast switching and very low phase noise. When used in conjunction with a differential loop amplifier, the HMC439QS16G & HMC439QS16GE generate output voltages that can be used to phase lock a VCO to a reference oscillator. The device is packaged in a low cost, surface mount 16 lead QSOP package with an exposed base for improved RF and thermal performance. Electrical Specifi cations, TA = +25 C, Vcc= 5V Parameter Conditions Maximum Input Frequency Minimum Input Frequency Input Power Range Supply Current (Icc) 6 - 96 Typ. Max. @ 10 kHz Offset with 100 MHz Input & Pin= 0 dBm Units MHz Sine Wave Input Fin= 10 to 1300 MHz Output Voltage SSB Phase Noise Min. 1300 -10 10 MHz +10 dBm 2000 mV, Pk - Pk -153 dBc/Hz 96 mA For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz 0.8 0.8 0.4 0 -0.4 250MHz 800MHz 1.3GHz 0.4 0 -0.4 Vcc=4.75V Vcc=5.0V Vcc=5.25V -0.8 -1.2 FREQUENCY DIVIDERS & DETECTORS - SMT 1.2 ERROR VOLTAGE (Vdc) ERROR VOLTAGE (Vdc) 1.2 -0.8 6 Error Voltage vs. Supply Voltage, Pin= 0 dBm, Fin= 250 MHz* Error Voltage vs. Frequency, Pin= 0 dBm* -1.2 -p -p/2 0 p/2 p -p -p/2 PHASE DIFFERENCE (rad) 0 p/2 p PHASE DIFFERENCE (rad) Error Voltage vs. Temperature, Pin= 0 dBm, Fin= 250 MHz* ERROR VOLTAGE (Vdc) 1.2 0.8 0.4 0 -0.4 +25 C +85 C -40 C -0.8 -1.2 -p -p/2 0 p/2 p PHASE DIFFERENCE (rad) SSB Phase Noise Performance, Pin= 0 dBm, Fin= 100 MHz 0 0 -30 -30 SSB PHASE NOISE (dBc/Hz) SSB PHASE NOISE (dBc/Hz) SSB Phase Noise Performance, Pin= 0 dBm, T= 25 C -60 -90 -120 1280 MHz -150 -180 2 10 3 10 4 10 5 10 OFFSET FREQUENCY (Hz) 6 10 -60 +25C +85C -40C -90 -120 -150 -180 2 10 3 10 4 10 5 10 6 10 OFFSET FREQUENCY (Hz) * See Gain & Error Voltage Test Circuit herein. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 97 HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz FREQUENCY DIVIDERS & DETECTORS - SMT 6 Absolute Maximum Ratings RF Input (Vcc= +5V) +13 dBm Supply Voltage (Vcc) +5.5V Channel Temperature (Tc) 135 C Continuous Pdiss (T = 85 C) (derate 47.2 mW/ C above 85 C) 4.25 W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Typical Supply Current vs. Vcc Vcc (Vdc) Icc (mA) 4.8 90 5.0 96 5.2 102 Note: Detector will work over full voltage range above. Typical DC Characteristics @ Vcc = +5V ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS +25C Symbol Characteristics Units Min. Typ. Max. Icc Power Supply Current 90 96 102 mA Voh Output High Voltage 5.0 5.0 5.0 V Vol Output Low Voltage 2.9 3 3.1 V Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC439QS16G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC439QS16GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H439 XXXX [2] H439 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 6 - 98 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz Pin Number Function Description 1 Vcc Supply voltage 5V 0.2V 2, 8, 9, 11, 16 GND All ground leads and ground paddle must be connected to PCB RF/DC ground. Interface Schematic (These pins are AC coupled and must be DC blocked externally.) 3 REF Reference Input 4 NREF Reference Input Compliment 5 N/C Not Connected (These pins are AC coupled and must be DC blocked externally.) 6 VCO VCO Input 7 NVCO VCO Input Compliment 10 Vcc3V 3.0 Volt Reference Voltage for Internal 10mA Current Source 12 ND Down Output Compliment 13 D Down Output NU Up Output Compliment U Up Output 14 15 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com FREQUENCY DIVIDERS & DETECTORS - SMT 6 Pin Description 6 - 99 HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz 6 Gain & Error Voltage Test Circuit: FREQUENCY DIVIDERS & DETECTORS - SMT Gain & Error Voltage data taken using test circuit below. Loop filter gain has been subtracted from the result. 6 - 100 Typical PLL Application Circuit using HMC439QS16G PLL application shown for a 12.8 GHz Fout. Contact HMC to discuss your specific application. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC439QS16G / 439QS16GE v02.0705 HBT DIGITAL PHASE-FREQUENCY DETECTOR, 10 - 1300 MHz The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. List of Materials for Evaluation PCB 105809 [1] Item Description J1 - J4 PCB Mount SMA RF Connector J5 2 mm DC Header C1 4.7 F Capacitor C2, C5 - C7 100 pF Capacitor, 0402 Pkg. C3, C4, C8 1000 pF Capacitor, 0603 Pkg. R1[3], R2 [3] 4.3 Ohm Resistor, 0603 Pkg. R3, R4, R5 200 Ohm Resistor, 0603 Pkg. U1 HMC439QS16G / HMC439QS16GE PCB [2] 105733 Eval Board Evaluation PCB Circuit FREQUENCY DIVIDERS & DETECTORS - SMT 6 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Choose values of R1 & R2 between 4.3 and 20 Ohms for best noise performance For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 101 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC439QS16GE HMC439QS16G HMC439QS16GETR 105809-HMC439QS16G HMC439QS16GTR