DO NOT
SCALE FROM
THIS PRINT
.290 7.37
REF
FLUSH TO
.005 [.13] MAX
(SEE NOTE 6)
"A"
"A"
SEE NOTE 4
C4
.200 5.08
REF
.020
REF
0.51
(No OF POS x .100 [2.54])
.010 [.25]
.103 2.62
REF
(No OF POS -1) x .100 [2.54]
2°
MAX SWAY
(TYP)
.050 1.27
01
02
NSSM-50-DV
C1
.277 7.03
90°
-
1°
+
4°
SECTION "A"-"A"
C-137-01-XXX
C3
C2
.0060 [.152]
SSM-1XX-XXX-DV-XX-XX-X-XX
No OF POSITIONS
-02 THRU -40
(PER ROW) (SEE NOTE 7)
ROW SPECIFICATION
-DV: DOUBLE VERTICAL
(USE NSSM-XX-DV-XX)
POLARIZING OPTION
-XX: POSITION TO BE POLARIZED
(USE PK-06-N) (SEE FIG 7, SHT 2)
(NOT AVAILABLE WITH -BE OPTION)
MOUNTING OPTION
-LC: LOCKING CLIP
(USE LC-05-TM)(SEE FIG 2)(SEE NOTE 8)
PLATING
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN ON TAIL
-T: MATTE TIN CONTACT AND TAIL
-F: 3µ" FLASH SELECTIVE GOLD
CONTACT, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" ON TAIL
-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (90/10+/-5%) TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA MATTE TIN TAIL
-TM: MATTE TIN CONTACT AND TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA MATTE TIN TAIL
OPTION
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(MOLDED: USE NSSM-XX-DV-XX, 4 POS MIN)
-P: PICK & PLACE PAD (SEE NOTE 5)
(USE PPP-01, SEE FIG 4, SHT 2)
-M: METAL PICK & PLACE PAD (SEE NOTE 5)
(USE LMP-02, SEE FIG 5, SHT 2)
-K: POLYIMIDE FILM PAD
(POS 2 THROUGH 40 - SEE NOTE 5)
(USE K-500-300, SEE FIG 6, SHT 2)
-TR: TAPE & REEL (SEE FIG 8, SHT 2-
29 POSITIONS MAX)
-BE: BOTTOM ENTRY
(ONLY AVAILABLE ON -DV)
(FOR -DV SEE NSSM-50-DV-XX)
OPTION
.043 1.09
IN-PROCESS
.010
REF
0.25
(No OF POS -2) x .100 [2.54]
FIGURE 2
-LC: LOCKING CLIP OPTION
.056
REF
1.42
.050 1.27
2°
MAX TOE
(ANY DIRECTION)
LC-05-TM
AE
C
AE
4
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP
BY:
SSM-1XX-XXX-DV-XX-XX-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
3/8/2000
2
1
SHEET SCALE: 1:0.4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 1 lb
3. MAXIMUM CUT FLASH: .010 [.25].
4. CUT PARTS MAY OR MAY NOT HAVE NOTCHES
5. -P OPTION: 4 POSITION AND UNDER TO BE -T/R
-M OPTION: 3 POSITION AND UNDER TO BE -T/R
-K OPTION: 3 POSITION AND UNDER TO BE -T/R
ALL OTHER POSITIONS WITH -P, -M, -K OPTIONS ARE
TO BE TUBED, UNLESS -TR ORDERED BY CUSTOMER.
6. FLUSH DIMENSION MUST BE INSPECTED ON BOTH ROWS
OF ASSEMBLY.
7. -40 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY
8.
DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
BODY: LCP UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
REVISION AE
USER DIRECTION OF UNREELING
POCKET NOT DETAILED
(No OF POS -2) x .100 [2.54]
REF
NSSM-XX-DV-XX
MOLDED (4 POSITION MIN)
.050 1.27
DIA.
.038
REF
0.97
"S"
.010 [.25]
.395
REF
10.03
"R"
PPP-01
FIGURE 4
-P: PICK & PLACE PAD
"R" = No OF POS x .100 [2.54]
"S" EVEN = "R"/2 - .1975 [5.017]
"S" ODD = "R"/2 - .2475 [6.287]
.195
REF
4.95
.050
REF
1.27
"R"
"S"
.010[.25]
.225
REF
5.72
LMP-02
"R" = No OF POS x .100 [2.54]
"S" = "R"/2 - .1195 [2.858]
FIGURE 5
-M: METAL PICK & PLACE PAD
FIGURE 7
POLARIZING POSITIONS
.008
REF
0.21
.280
REF
7.11
PT-1-24-03-15
PT-1-24-01-103
01
02
71
72
"R"
.028
±.010
0.71
±0.25
"S"
.010[.25]
.256 6.50
FIGURE 6
-K: POLYIMIDE FILM PAD
"R" = No OF POS x .100 [2.54]
"S" = "R"/2 - .128 [3.25]
FIGURE 8
TAPE & REEL VIEW
58
01
02
57
.295 7.49
FIGURE 3
-A: ALIGNMENT PIN
AE
AE
SHEET OF
.100 C.L. DOUBLE VERTICAL SMT SOCKET STRIP
BY:
SSM-1XX-XXX-DV-XX-XX-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
3/8/2000
2
2
SHEET SCALE: 1:0.4
F:\DWG\MISC\MKTG\SSM-1XX-XXX-DV-XX-XX-X-XX-MKT.SLDDRW
REVISION AE
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
