11. Jan. 17
PR130/50/SE/UL
HEATSINKS Extrusions
Flatback profiles with gap
88 mm
Width :
35 mm
Height :
5 mm
Base height :
Extruded heat sink profile with counter-sunk mounting area
Surface: AL= Untreated aluminium, SE= anodised black, NE= anodised colourless, CR Chromated- colourless (Chrom6-free,
RoHS conform)
Alloy: AlMgSi 0,5 F22
Standard tolerances (if not otherwise required):
Machining tolerance: DIN 2768 m
Finishing to your specification
Length, milling, surface refinement, including mounting-, insulation-, thermal interface accessories
Additional information:
Measurement conditions for the values in the thermal diagram are described at 'www.alutronic.com/service/thermal-
measurments'
General information for designing your heat sink solution you will find at 'www.alutronic.com/service/technical-information'
Product Data Sheet Type:
Group:
Alutronic Kühlkörper GmbH Co. KG| Auf der Löbke 9-11|D-58553 Halver|Tel: 02353 9155|Fax:02353 915333|www.alutronic.de
Picture only basic Profile!
