2
P/N:PM0135 REV. 4.2, JUN. 19, 2003
MX23C4000
ABSOLUTE MAXIMUM RATINGS
Item Symbol Ratings
P o wer Supply Voltage V C C -0.5V to 7.0V
Input Voltage VI -0.5V to VCC + 0.5V
Output Voltage VO -0.5V to VCC + 0.5V
Ambient Operating Temperature Topr -10°C to 70°C
Storage T emperature Tstg -65°C to 125°C
AC CHARACTERISTICS (Ta = -10°°
°°
°C ~ 70°°
°°
°C, VCC = 5.0V ± ±
± ±
± 10%)
Item Symbol 23C4000-90 23C4000-10 23C4000-12 23C4000-15
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
Read Cycle Time tRC 90ns - 100ns - 120ns - 150ns -
Address Access Time tAA - 90ns - 100ns - 120ns - 150ns
Chip Enable Access Time tACE - 90ns - 100ns - 120ns - 150ns
Output Enable Time tOE - 45ns - 50ns - 60ns - 70ns
Output Hold After Address tOH 0ns - 0ns - 0ns - 0ns -
Output High Z Delay tHZ - 20ns - 20ns - 20ns - 20ns
Note : Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by
design over the full voltage and temperature operating range - not tested.
DC CHARACTERISTICS (Ta = -10 °°
°°
°C ~ 70°°
°°
°C, VCC = 5.0V ±±
±±
± 10%)
Item Symbol MIN. MAX. Conditions
Output High V oltage V O H 0.8VCC - IOH = -100uA
Output Low V oltage V OL - 0.4V IOL = 2.1mA
Input High V oltage VIH 2.2V VCC+0.5V
Input Low V oltage VIL -0.3V 0.8V
Input Leakage Current ILI - 10uA 0V, VCC
Output Leakage Current ILO - 10uA 0V , VCC
Operating Current ICC1 - 35mA tRC = 100ns, all output open
Standby Current (TTL) ISTB1 - 1mA CE = VIH
Standby Current (CMOS) ISTB2 - 100uA CE > VCC - 0.2V
Input Capacitance CIN - 10pF Ta = 25°C, f = 1MHz
Output Capacitance COUT - 10pF Ta = 25°C , f = 1MHz
Note: minim um DC voltage on input or I/O pins is -0.5V. During voltage transitions , inputs may undershoot VSS to -
2.0V f or periods of up to 20ns. Maxim um DC v oltage on input or I/O pins is VCC+0.5V. During voltage tr ansitions ,
input ma y ov ershoot VCC to VCC+2.0V f or periods of up to 20ns.