Thermofit® Tubing
Specification Control Drawing
No: TMS-SCE-L
Rev: B
Date: September 2, 1998
Page: 1 of 1
TMS-SCE-L
Dimensions (inches)
Minimum Maximum Sleeve
Size Equivalent Recovered Width Recovered
Inside Diameter Inside Diameter Minimum Wall Thickness
3/32 .093 .031 .170 .023 ± .003
1/8 .125 .042 .230 .023 ± .003
3/16 .187 .062 .315 .023 ± .003
1/4 .250 .083 .420 .023 ± .003
3/8 .375 .125 .610 .024 ± .003
1/2 .500 .166 .805 .024 ± .003
3/4 .750 .250 1.200 .024 ± .003
1 1.000 .333 1.590 .025 ± .003
1 1/2 1.500 .750 2.375 .020 ± .003
2 2.000 1.000 3.200 .020 ± .003
The sleeving shall meet the physical property requirements of RT-1805.
Raychem reserves the right to amend this specification at any time. Users should evaluate the suitability of the product for their application.
If this document is printed it becomes uncontrolled. Check for the latest revison.
