THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION -,7 COPYRIGHT - ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. 2.16 MAX DIA > ay, =0.25 MAX CUTOFF [.085] [.010] | 7.62 REF SS \ [.300] =<-[- > | I ! +0.13 aN 9-91 _990 +.005 ay, 390 * O03] _ +0.20 _ (| CU 14.6117045 _ 575 +.008 005 COLOR CODED BLACK, ON FAR SIDE INDICATES 2428 AWG WIRE RANGE LOOSE PIECE ONLY y Y 1.0240.04 DIA [.0400+.0015] i ! 3.94 +] (.155] MIN LOCALIZED GOLD PLATE AREA +0.25 2.41 9 43- _ +.010 1.490 79-29 |.09 838) 0.13 +.010 oss * S08 SECTION XX SECTION YY INSULATION BARREL WIRE BARREL SCALE 20:1 SCALE 20:1 Loc GP DIST REVISIONS OO P| OR DESCRIPTION DATE DWN APVD REVISED PER ECO08007460 20JUN2008 ZMRICWR D /\ FOR MINIAPPLICATOR. / FOR HAND TOOL USE ONLY. 3. WIRE RANGE OF 24-28 AWG, INSULATION RANGE OF 1.27--1.52 [.050.060]. 4. GOLD PLATING MAY NOT APPEAR ON CARRIER STRIP. | /\ GOLD PLATING PER MILG45204. NICKEL PLATING PER QQN290. TIN PLATING PER MILT1072/7. /\ GOLD PLATED IN LOCALIZED GOLD PLATE AREA AS FOLLOWS: J 0.76um [.000030] MIN GOLD IN MATED AREA, GOLD FLASH ON REMAINDER OF CONTACT, ALL OVER 1.27um [.000050] MIN NICKEL UNDERPLATE. OR GOLD FLASH OVER PALLADIUMNICKEL PLATE, 0.76um [.000030] MIN TOTAL IN MATED AREA, GOLD FLASH ON REMAINDER OF CONTACT, ALL OVER 1.274m [.000050] MIN NICKEL UNDERPLATE. J GOLD PLATED IN LOCALIZED GOLD PLATED AREA, GOLD FLASH IN MATED AREA, TIN PLATED WIRE BARRELS, OVER 0.76um [.000030] NICKEL. GOLD PLATED IN LOCALIZED GOLD PLATED AREA, 0.76um [.000030] GOLD IN MATED AREA, TIN PLATED WIRE BARRELS OVER 1.27um_ [.000050] NICKEL. /\ OBSOLETE. N 0O CO CO CO B JX |A\166682-1 | A\66682-9 J ~ /\666826 /e\ 666824 666822 FINISH | LOOSE PART /\ PIECE NUMBER THIS DRAWING IS A CONTROLLED DOCUMENT. mS WELDON 3-9-86 = Tyco Electronics Corporation CHK 9-9-86 Tyco . C. RICHARD Electronics Harrisburg, PA 171053608 A DIMENSIONS: OTHERWISE SPECIFIED: [APD 9-10-86 | NAME mm [NCHES] tele =v KUMAR PIN CONTACT, SIZE 20 DF, 1 PLC + _ 24-28 AWG, AMPLIMITE Of PLC + 0.13 [.005] 3 PLC + - APPLICATION SPEC aneres + a _ 11410000 SIZE CAGE CODE | DRAWING NO RESTRICTED TO MATERIAL FINISH WEIGHT _ O O 7 7 9 BRASS PER MILC50 SEE TABLE A2 C 66682 CUSTOMER DRAWING SCALE SHEET 10:1 1% 4 REV K AMP 1471-9 REV 31MAR2000