TEN 30-2411 - TRACO Power - Product.Network

http://www.tracopower.com Page 1 of 4

Features

◆ Smallest encapsulated 30 W converter

◆ 2’’ x 1’’ x 0.4’’ shielded metal package

with isolated baseplate

◆ Single- and dual output models

◆ I/O isolation voltage 1500 VDC

◆ Excellent efﬁciency up to 91 %

◆ Operating temperature range

–40°C to +85°C

◆ Remote On/Off

◆ Over-temperature protection

◆ 3-year product warranty

DC/DC Converters

TEN 30 Series, 30 Watt

The TEN-30 series is the latest generation of high performance dc-dc converter

modules setting a new standard concerning power density. This product with

30W comes in an encapsulated, shielded metal package with a footprint of only

1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated,

isolated output voltages. Advanced circuit topology provides high efﬁciency up to

91% which allows an industrial operating temperature range of –40°C to +85°C

(with derating).

Further features include remote On/Off, trimmable output, under-voltage lockout

and overtemperature protection. Typical applications for these converters are mo-

bile equipment, instrumentation, distributed power architectures in communication

and industrial electronics and everywhere where space on the PCB is critical.

Ordercode Input voltage Output voltage Output current max. Efﬁciency typ.

TEN 30-1210 3.3 VDC 8‘000 mA 85 %

TEN 30-1211 9 – 18 VDC 5.1 VDC 6‘000 mA 87 %

TEN 30-1212 (nominal 12 VDC) 12 VDC 2‘500 mA 89 %

TEN 30-1213 15 VDC 2‘000 mA 89 %

TEN 30-1221 ±5 VDC ±3‘000 mA 87 %

TEN 30-1222 ±12 VDC ±1‘250 mA 87 %

TEN 30-1223 ±15 VDC ±1‘000 mA 87 %

TEN 30-2410 3.3 VDC 8’000 mA 87 %

TEN 30-2411 18 – 36 VDC 5.1 VDC 6‘000 mA 90 %

TEN 30-2412 (nominal 24 VDC) 12 VDC 2‘500 mA 91 %

TEN 30-2413 15 VDC 2‘000 mA 91 %

TEN 30-2421 ±5 VDC ±3‘000 mA 90 %

TEN 30-2422 ±12 VDC ±1‘250 mA 89 %

TEN 30-2423 ±15 VDC ±1‘000 mA 90 %

TEN 30-4810 3.3 VDC 7‘500 mA 87 %

TEN 30-4811 36 – 75 VDC 5.1 VDC 6‘000 mA 89 %

TEN 30-4812 (nominal 48 VDC) 12 VDC 2‘500 mA 91 %

TEN 30-4813 15 VDC 2‘000 mA 91 %

TEN 30-4821 ±5 VDC ±3‘000 mA 90 %

TEN 30-4822 ±12 VDC ±1‘250 mA 88 %

TEN 30-4823 ±15 VDC ±1‘000 mA 89 %

Models

Scheme

UL 60950-1UL 60950-1

http://www.tracopower.com Page 2 of 4

Input Specifications

Input current at no load – 12 Vin models ±12 / ±15 Vout models: 50 mA typ.

other output models: 110 mA typ.

– 24 Vin models 5.1 / ±5 Vout models: 70 mA typ.

other output models: 40 mA typ.

– 48 Vin models ±15 Vout model: 20 mA typ.

other output models: 44 mA typ.

Input current at full load – 12 Vin models 3.3 Vout models: 2700 mA typ.

other output models: 3000 mA typ.

– 24 Vin models 3.3 Vout models: 1300 mA typ.

other output models: 1500 mA typ.

– 48 Vin models 3.3 Vout models: 650 mA typ.

other output models: 750 mA typ.

Start-up voltage / 12 V models: 9 VDC / 8 VDC typ.

under voltage shut down 24 V models: 18 VDC / 16 VDC typ.

48 V models: 36 VDC / 32 VDC typ.

Surge voltage (100 ms max.) 12 V models: 25 V max.

24 V models: 50 V max..

48 V models: 100 V max.

Conducted noise (input) EN 55032 class A with input capacitor

12 V models: 10 µF / 25 V 1812 MLCC

24 V models: 4.7 µF / 50 V 1812 MLCC

48 V models: 2.2 µF / 100 V 1812 MLCC

Output Specifications

Voltage set accuracy ±1 %

Output voltage adj. range ±10 % (only for single output models)

Regulation – Input variation Vin min. to Vin max. 0.2 % max.

– Load variation 0 – 100 % single output models: 0.5 % max.

dual output models balanced load: 1.0 % max.

dual output models unbalanced load (25% /100%): 5.0 % max.

Minimum load not required

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max.

(150 mVpk-pk for 12/±12/15/±15V models)

Start up time (nominal Vin and constant resistive load) 30 ms typ.

Transient response time (25% load change) 250 µs typ.

Short circuit protection indefinite, automatic recovery

Over load protection 150 % of Iout max. typ.

Over voltage protection 3.3 VDC models: 3.9 V

5.1 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 18 V

Capacitive load (max.) 3.3 Vout models: 20’000 µF

5.1 Vout models: 14 ’4 0 0 µ F

12 Vout models: 3’000 µF

15 Vout models: 2’000 µF

±5 Vout models: 3’000 µF (each output)

±12 Vout models: 2’000 µF (each output)

±15 Vout models: 1’300 µF (each output)

DC/DC Converters

TEN 30 Series, 30 Watt

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com Page 3 of 4

General Specifications

Temperature ranges – Operating – 40°C to +85°C

– Case temperature +105°C max.

– Storage – 55°C to +125°C

Load derating 3.3 %/K above +60°C

Over temperature protection at +115°C typ.

Humidity (non condensing) 5 % to 95 % rel H max.

Thermal inpedance – Natural convection 12 °C/W

– Natural convection with heat sink 10 °C/W

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 1.4 Mio. h

Isolation voltage (60 s) – Input/Output 1‘500 VDC

Isolation capacitance – Input/Output 1500 pF max.

Isolation resistance – Input/Output (500 VDC) >1’000 MOhm

Remote On/Off: – On: 3 to 12 VDC or open circuit.

– Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2

– Standby current: 3 mA max.

Switching frequency (fixed) 430 kHz typ. (puls width modulation)

Vibration and thermal shock MIL-STD-810F

Safety approvals cUL/UL 60950-1, IEC/EN 60950-1

– Certification documents www.tracopower.com/overview/ten30

DC/DC Converters

TEN 30 Series, 30 Watt

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Output Voltage Adjustment

Trim

+Vout

Trim

Vout

Trim up Trim down

Physical Specifications

Casing material copper, nickel plated

Baseplate non conductive FR4

Potting material epoxy (UL 94V-0 -rated)

Weight 31 g (1.1 oz)

Soldering temperature max. 265°C / 10 s

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Nominal output voltage at open Trim input!

Rd [kohm]

output 1.5 2.5 3.3V 5.1V 12V 15V

–5% 0.68 6.2 8.2 6.2 56 56

–10% 0.062 0.75 0.62 0.82 5.6 2.2

Ru [kohm]

output 1.5 2.5 3.3V 5.1V 12V 15V

+5% 0.56 4.3 6.8 5.1 43 47

+10% 0.051 0.33 0.75 0.75 4.3 1.8

Supporting documents: www.tracopower.com/overview/ten30

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Page 4 of 4

DC/DC Converters

TEN 30 Series, 30 Watt

Outline Dimensions

Rev. July 13, 2018

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.1 (0.04 ±0.004)

Pin pitch tolerances: ±0.25 (±0.01)

Case tolerances: ±0.5 (±0.02)

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3Remote On/Off

4+ Vout + Vout

5–Vout Common

6Trim –Vout

Pin-Out

56.0 (2.2) max.

14.5 (0.57)

16.8 (0.66)

max.

Converter

Heat-sink

Thermal pad

Clamp

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be supplied

with heat-sinks already mounted. Please con-

tact factory for quotation.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 17g (0.60oz) without converter

Thermal impedance after assembling: 10 K/W

Bottom View

456

5.6

(0.22)

10.2

(0.4)

50.8

(2.0)

45.72

(1.8)

2.5

(0.1)

2.54

(0.1)

5.08

(0.2)

15.24

(0.6)

10.16

(0.4)

20.32

(0.8)

25.4

(1.0)

Heat-Sink (Option)

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TEN 30-2412 TEN 30-2422 TEN 30-2411 TEN 30-2413 TEN 30-2423 TEN 30-2410 TEN 30-1222 TEN 30-1212

TEN 30-1223 TEN 30-1210 TEN 30-1211 TEN 30-4812 TEN 30-4810 TEN 30-4821 TEN 30-1221 TEN 30-2421

TEN 30-4807 TEN 30-4823 TEN 30-1209 TEN 30-4811 TEN 30-2407 TEN 30-1213 TEN 30-4809 TEN 30-2409

TEN 30-1207 TEN 30-4813 TEN 30-4822