PHOTOCOUPLER PS8101 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS8101 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. This is a plastic SOP (Small Out-line Package) type for high density applications. FEATURES * High common mode transient immunity (CMH, CML = 10 kV/s MIN.) * Small package (5-pin SOP) PIN CONNECTION (Top View) * High supply voltage (VCC = 35 V) * High isolation voltage (BV = 2 500 Vr.m.s.) 5 4 3 * High-speed response (tPHL = 0.8 s MAX., tPLH = 1.2 s MAX.) 1. Anode 2. Cathode 3. GND 4. VO 5. VCC * Ordering number of taping product: PS8101-F3, F4: 2 500 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option) APPLICATIONS * Computer and peripheral manufactures * General purpose inverter * Substitutions for relays and pulse transformers * Power supply Document No. PN10260EJ02V0DS (2nd edition) Date Published February 2005 CP(K) The mark shows major revised points. 1 2 PS8101 PACKAGE DIMENSIONS (UNIT: mm) 3.4 +0.3 -0.1 7.00.3 2.60.2 0.15 +0.10 -0.05 4.4 0.50.3 0.10.1 1.27 0.4 +0.10 -0.05 0.25 M MARKING EXAMPLE 8101 N234 No. 1 pin Mark Initial of NEC (Engraved mark) Assembly Lot N *1 N 2 34 Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 2 Bar : Pb-Free Data Sheet PN10260EJ02V0DS PS8101 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number Specification PS8101 PS8101-A PS8101-F3 PS8101-F3-A PS8101-F4 PS8101-F4-A PS8101-V Pb-Free *2 Magazine case 100 pcs Standard products Embossed Tape 2 500 pcs/reel (UL approved) PS8101-V-A Magazine case 100 pcs DIN EN60747-5-2 PS8101-V-F3 PS8101-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2) PS8101-V-F4 PS8101-V-F4-A *1 PS8101 Approved (Option) *1 For the application of the Safety Standard, following part number should be used. *2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit IF 25 mA VR 5.0 V PD 45 mW Supply Voltage VCC 35 V Output Voltage VO 35 V IO 8.0 mA PC 100 mW BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +125 C Diode Forward Current Reverse Voltage Power Dissipation Detector *1 Output Current Power Dissipation Isolation Voltage *2 *3 *1 Reduced to 0.45 mW/C at TA = 25C or more. *2 Reduced to 1.00 mW/C at TA = 25C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60 % between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10260EJ02V0DS 3 PS8101 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Forward Voltage VF IF = 16 mA Reverse Current IR VR = 3 V Forward Voltage Temperature Coefficient Terminal Capacitance Detector Coupled Conditions VF/T Ct TYP. MAX. Unit 1.7 2.2 V 10 A -2.1 mV/C V = 0 V, f = 1 MHz 30 pF 3 IF = 16 mA High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IO = 1.2 mA 0.1 Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V 50 High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V 0.01 2 CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 20 35 Current Transfer Ratio *1 15 500 nA 100 A 0.4 V A RI-O VI-O = 1 kVDC, RH = 40 to 60% Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 Propagation Delay Time *2 (H L) tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 k, CL = 15 pF 0.5 0.8 Propagation Delay Time *2 (L H) tPLH 0.6 1.2 Common Mode Transient Immunity at *3 High Level Output CMH IF = 0 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV 10 Common Mode Transient Immunity at *3 Low Level Output CML IF = 16 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV -10 K : 20 to 35 (%) N : 15 to 35 (%) Data Sheet PN10260EJ02V0DS % 11 Isolation Resistance *1 CTR rank 4 MIN. 10 pF s kV/s PS8101 *2 Test circuit for propagation delay time Pulse input 0.1 F (Pulse width = 100 s, Duty cycle = 1/10) Input (Monitor) Input VCC = 5 V RL = 2.2 k VO (Monitor) CL = 15 pF 50 % 5V Output 1.5 V VOL 47 tPHL tPLH CL is approximately 15 pF which includes probe and stray wiring capacitance *3 Test circuit for common mode transient immunity 1.5 kV VCM 90 % IF 0.1 F VCC = 5 V RL = 4.1 k VO (Monitor) 10 % tr VO (IF = 0 mA) VCM VO (IF = 16 mA) 0V tf 5V 2V 0.8 V VOL USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10260EJ02V0DS 5 PS8101 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 40 30 20 10 25 0 50 75 60 40 20 50 75 100 FORWARD CURRENT vs. FORWARD VOLTAGE HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE TA = +100C +50C +25C 1 0C -25C 0.1 1.2 1.4 1.6 1.8 2.0 2.2 IF = 0 mA 100 VCC = VO = 30 V VCC = VO = 5.5 V 10 1 0.1 -25 2.4 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 80 VCC = 4.5 V, VO = 0.4 V 70 60 50 40 30 20 10 0 0.5 1 5 10 50 1.6 Remark Normalized to 1.0 at TA = 25 C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 Ambient Temperature TA (C) Forward Current IF (mA) 6 25 Ambient Temperature TA (C) High Level Output Current IOH (nA) Forward Current IF (mA) 80 1 000 0.01 1.0 Current Transfer Ratio CTR (%) 100 Ambient Temperature TA (C) 100 10 120 0 100 Normalized Current Transfer Raio CTR Diode Power Dissipation PD (mW) 50 The graphs indicate nominal characteristics. Data Sheet PN10260EJ02V0DS 100 PS8101 OUTPUT VOLTAGE vs. FORWARD CURRENT OUTPUT CURRENT vs. OUTPUT VOLTAGE 6 5 IF = 25 mA 6 20 mA 15 mA 4 10 mA 5 mA 2 0 Propagation Delay Time tPHL, tPLH (s) Output Voltage VO (V) 8 2 4 6 8 4 3 10 12 14 16 0 18 20 5.6 k 2 4 6 8 10 12 14 16 18 20 Output Voltage VO (V) Forward Current IF (mA) PROPAGATION DELAY TIME vs. FORWARD CURRENT PROPAGATION DELAY TIME vs. LOAD RESISTANCE 3.0 VCC = 5 V, RL = 2.2 k 2.0 tPHL 1.0 tPLH 0 5 10 15 20 25 10 VCC = 5 V, IF = 16 mA tPLH 1 tPHL 0.1 1k Forward Current IF (mA) Normalized Propagation Delay Time tPHL, tPLH RL = 2.2 k 2 1 Propagation Delay Time tPHL, tPLH (s) Output Current IO (mA) 10 10 k 100 k Load Resistance RL () NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 5 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 5 V, RL = 2.2 k 4 3 2 tPLH tPHL 1 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10260EJ02V0DS 7 PS8101 TAPING SPECIFICATIONS (UNIT: mm) 1.550.1 7.40.1 5.50.1 1.5+0.1 -0 12.00.2 2.00.05 4.00.1 1.750.1 Outline and Dimensions (Tape) 3.45 MAX. 3.00.1 3.90.1 8.00.1 0.30.05 Taping Direction PS8101-F4 PS8101-F3 Outline and Dimensions (Reel) 2.00.5 1001.0 21.00.8 13.00.2 R 1.0 3302.0 2.00.5 13.00.2 13.51.0 17.51.0 Packing: 2 500 pcs/reel 8 Data Sheet PN10260EJ02V0DS 11.9 to 15.4 Outer edge of flange PS8101 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C Data Sheet PN10260EJ02V0DS 9 PS8101 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 10 Data Sheet PN10260EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.