EMBEDDED MEMORY and STORAGE SOLUTIONS AUTOMOTIVE COMMUNICATIONs INDUSTRIAL NETWORKING SECURITY Why choose Swissbit Swissbit, the largest independent embedded memory and storage solutions manufacturer in Europe, was created through a management buyout from Siemens Semiconductor in 2001. With over 20 years of experience in the memory and storage industry, Swissbit has become a world class leader in technology supplying high quality, high reliability memory and storage solutions with all established DRAM and Flash interfaces. Overview of services Swissbit is offering its customers: Products Customization Compliance With - Complete line of DRAM modules and NAND Flash Solid State Drives with industry standard interfaces and form factors - Both leading edge technology and legacy product offerings - Extended and industrial temperature grade products - Chip-On-Board (COB) and Systemin-Package technology - Small form factor removable NAND Flash cards - Memory in-Package solutions - Mobile Security Solutions, like Secure microSD, SD and more - Security firmware, drivers and SDK - Custom memory and storage solutions - Security features - Individual marking - Conformal coating - JEDEC, SDA, CFA, USB-IF, SATA-IO - RoHS, REACH, and WEEE - UL - FCC, CE Sales Service and Engineering Support - Fast, effective, and competent sales staff on hand to serve your needs - Our expert technical staff is available for quick response - Joint product qualification service - In-house manufacturing in Germany - Design-in support 2 Quality Standards OEM Services - Controlled bill of materials (BOM) - Serialization and lot code tracking - Support of long life cycles - Stringent PCN and ECN process Test for Reliability - Final extended and industrial temperature testing with KTI and Tanisys Technology equipment - World class Swissbit application testing - System Level Test During Burn-In (TDBI) - Environmental testing according to industrial and automotive standards - ISO 9001:2008 - TS 16949 - ISO 14001 Associations - JEDEC - CompactFlash Association (CFA) - SATA-IO - USB Implementer Forum - Secure Digital Association (SDA) - Memory Implementers Forum - Small Form Factor Special Interest Group SFF-SIG INTRODUCTION Swissbit Target Applications........ 4 Swissbit Product Features........... 6 Swissbit's Unique 360 Customer Service....................... 8 Storage Solutions Flash Storage Solutions.............. 9 2.5" PATA & SATA SSDs............... 10 SATA SSD Modules..................... 12 SATA SSD Modules SLC................. 13 SATA SSD Modules MLC................ 15 Flash Life Time Prediction........... 14 CFastTM cards.......................... 16 CompactFlashTM cards............... 18 MicroSD memory cards............... 20 SD memory cards..................... 22 USB Flash Drives / Modules.......... 24 SECURITY SOLUTIONS Security Products..................... 26 Security microSD card............... 28 Memory Solutions Unbuffered DIMMs................... SODIMMs............................... XRDIMMs............................... Mini / Micro DIMMs................... Module Options....................... Mini RDIMMs.......................... SORDIMMs.............................. Registered DIMMs.................... 33 33 33 33 34 35 35 35 TECHNOLOGY System-in-Package (SiP)............ 36 Part Number Decoders Storage and Security Part Numbers......................... 38 Memory Solutions Part Numbers......................... 39 Global Presence...................... 40 3 SWISSBIT TARGET APPLICATIONS Industry Typical applications: Industrial Automation * Process- / motion control * Industrial PC / embedded * industrial measurement * Building technology * Identification / access systems * Surveillance Infotainment * POS terminals * Information terminals * Ticket- / vending terminals * Digital signage and advertising * Casino gaming * VLTs & lottery terminals Energy * Energy distribution * Energy consumption * Smart grid Healthcare * Diagnostics * Point of care testing * Mobil systems * Imaging Transportation * Train Control and Monitoring Systems (TCMS) * Multifunctional terminals * Data recorders Aerospace and defense * In-flight Entertainment & Communication (IFE&C) * Communications, Command, Control and Intelligence (C4ISR) * Combat management systems * Battlefield sensor systems Memory and non-volatile storage solutions for embedded applications must provide reliable operation even in the most extreme conditions (e.g., temperature, shock, and vibration). As such, both the qualification cycle and the support life cycle needed for these products far exceed those of devices designed for typical consumer applications. Swissbit`s embedded memory and storage solutions are the perfect fit for such demanding applications. They offer the highest reliability and quality with long availability and controlled BOM. To guarantee such high quality standards, each product undergoes thorough functional testing before being released for shipment. Automotive Typical applications: * * * * Entertainment systems Navigation systems Head unit / dashboard Black box / crash recorder The increasing varieties of infotainment and dashboard applications in our cars today require significantly higher storage capacities than before. All components used in automotive applications need to operate within a wide temperature range and withstand sudden power loss as well as shock and vibration. Additionally, very low failure rates are essential, because replacements of malfunctioning parts can incur high costs. Swissbit is the only independent embedded memory and storage manufacturer with TS16949. Our new S-45 SD and microSD memory card lineup caters to the demands of an automotive application, offering the highest reliability and quality at competitive prices. 4 NETWORKING/COMMUNICATION Typical applications: * * * * ATCA Blade Cable modem Content and video delivery Digital Subscriber Line access multiplexer * Enterprise Media Gateway * Switches and routers * * * * * * Optical network Radar / Sonar Radio network controller Security Tetra Base Station Wireless Base Station Telecommunication infrastructure is implemented globally in every possible climate zone; therefore the equipment has to operate under most severe weather conditions such as heat, cold, humidity, or dust. This results in a long, expensive qualification and testing process and the need for products that guarantee long-term availability to minimize the number of requalifications. Our cards provide features that are particularly suitable for NetCom applications, where high reliability, longer duty cycles, and on-field firmware upgrade are key requirements. Swissbit`s product portfolio is very much focused on products and form factors that will dominate the NetCom sector in the near future, such as small form factors like our newest SATA III devices including M.2, mSATA, and slimSATA. Among our solutions, we have customized products able to guarantee a high level of random performance meeting or exceeding most NetCom application requirements. Swissbit`s embedded memory and storage solutions are tested specifically for rough environmental conditions and guarantee industry leading reliability standards. Long-term relationships with our suppliers allow us to guarantee a fixed BOM along with the highest possible longevity. SECURITY Governments, enterprises, banks, and industry demand high-end security. Swissbit`s secure storage solutions offer smart modularization of algorithms and secure storage of encryption keys in one runtime environment. Thus solution providers can concentrate fully on system design while the computation of cryptographic operations is delegated to the trusted execution environment, e.g., a smart card chip in the Flash memory device. The Swissbit Security Interface supports all relevant mobile, portable, embedded, and PC platforms. TARGET APPLICATIONS 5 SWISSBIT PRODUCT FEATURES Wide Temperature Support Swissbit`s embedded memory and storage solutions are designed and approved for reliable operation over a wide temperature range. The products are verified at temperature corners and pre-stressed with a burn-in operating functional test (Test During Burn In-TDBI). ESD and EMI safe The product designs are in line with the latest regulations for electrostatic discharge and electromagnetic interference. Swissbit strives to exceed these limits with our own in-house technology and production capabilities, for example with System-in-Package (SiP) competence. Shock and Vibration Robustness is one of our key specification targets. The design, assembly, and use of selected materials guarantee an extremely solid design, which has been validated by extensive testing. Life Time Monitoring (LTM) The Swissbit Life Time Monitoring feature enables users to access the memory device's detailed Life Time Status and allows imminent failure prediction thereby avoiding unexpected data loss. This feature uses an extended S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) interface or vendor specific commands to retrieve Flash product information. Zone Protection The device allows the configuration of multiple zones with either no protection, write protection, or access protected settings. Each zone is secured with a separate password. A Windows tool and a programming library are available. SECURE ERASE (SANITIZE/ PURGE) / FAST ERASE This feature uses an uninterruptable sequence of data erase commands. Even a power-off can't stop the process, which will continue upon restoration of power. The optional enhanced feature allows the customer to sanitize the data according to different standards like DoD, NSA, IREC, etc. The purge algorithm can be started by a software command or through a hardware pin. 6 SWISSBIT FEATURES Conformal Coating Swissbit offers a special protective coating on selected products. This coating is a thin polyurethane film, which protects against aggressive environmental conditions such as dust, moisture, or corrosive gas. TEMPERATURE SENSOR The sensor allows the host hardware or software to monitor memory device temperature to improve data reliability in the target application environment. HEAT SPREADER Heat spreader for DRAM modules allow temperature hot spots to be dissipated over a larger surface area and improve the module's reliability. POWER FAIL PROTECTION and RECOVERY Intelligent power fail protection and recovery protects data from unexpected power loss. During an unintentional shutdown, firmware routines and an intelligent hardware architecture ensure that no corruption of user or system data will occur. Wear Leveling Sophisticated wear leveling and bad block management ensure that Flash cells are sparingly and equally used to prolong the device`s life. READ-ONLY OPTIMIZED In many industrial applications, content is written to the NAND Flash once and is only read afterwards. For such cases, the firmware can be optimized to guarantee the highest possible data retention and less read disturb. TRIM SUPPORT The TRIM command allows the operating system to inform the SSD about which blocks of data are no longer considered in use and can be wiped internally, which increases system performance during subsequent write accesses. With TRIM support, data scrap, which would otherwise slow down future write operations to the involved blocks, can be deleted in advance. LOW POWER CONSUMPTION Electronic devices with lower power consumption increase the value of the product, because they decrease energy cost, prolong battery life, and reduce heat generation in the device and hence require less cooling. Data Care Management LONGEVITY Various effects like data retention, read disturb limits, or temperature can impact data reliability. The latest generation of Swissbit products uses special methods to maintain and refresh the data for greater data integrity. The longevity product lines use special components with a long-term supply commitment of up to ten years. These products offer the lowest TCO in demanding applications with high requalification cost. SECURITY FEATURES TRUE HARDWARE RNG SECURE VOICE True random numbers are generated inside the secure element. True randomness is the key prerequisite for secure systems to prevent brute force attacks. Secure Voice calls are a requirement for confidential communication. Swissbit Security products are optimal for fast, encrypted, user friendly secure voice solutions. DIGITAL SIGNATURE AND ELLIPTIC CURVE CRYPTOGRAPHY VERFICATION SUPPORT Digital signatures are very popular and inevitable to protect against data or code manipulation. Elliptic curves are faster and more efficient than RSA cryptography. HARDWARE BASED DATA Secure CD-ROM ENCRYPTION Hardware based security is key when it comes to replaceability, simple workflows, and trusted runtime environments. The Flash memory can be partially or totally switched to read-only. This function ensures that e.g., important data can be modified only after PIN authentication. MOBILE BANKING AND ePURSE Data Protection and Encryption Swissbit Security products for mobile banking and payment offer strong authentication and offline security. Various data protection modes ensure privacy of stored data. The card offers a data safe function with strong AES encryption and PIN access protection. DEVICE PROTECTION BY DUAL K H KNOW + HAVE FACTOR AUTHENTICATION Secure Logging The user needs to have the card and know the PIN. In large, hidden storage, any system event log, tax data, consumption data, or audit trails can be stored securely in write-once mode, queue mode, or random access mode. SWISSBIT FEATURES 7 SWISSBIT'S UNIQUE 360 CUSTOMER SERVICE PRE-SALES YOUR FUTURE WITH OUR SOLUTION Swissbit's experienced BDM and FAE teams in Europe, North America, and Asia support you in the selection and qualification of the most suitable memory and storage solution for your applications. Our services include * TCO support, * consulting (design / concept / technology), * qualification cycle support & joint qualification, * evaluation units, * * * * hardware customization, firmware customization, midware customization for security products, and consulting for your future product generations. PRESALES CUSTOMER AFTERSALES AFTERSALES SALES LOCAL SUPPORT -- GLOBALLY LOCAL SUPPORT -- GLOBALLY Our engagement stretches far beyond the delivery of our products. Through sophisticated lifecycle management, we can ensure maximum longevity and smooth transitions in the event of product changes. And while we are proud of our best-in-class quality, we are still prepared to provide fast and solution-oriented RMA support at any time, including 4D and 8D reports whenever required. Our services include * local high level engineering support, * longevity of product lines - up to ten years, * field support (including firmware upgrades), * full product and service life support, and * PCN process. 8 SALES Customer Service We understand the importance of providing local support in your language and time zone. For that reason, Swissbit has established sales offices in all major regions plus a strong network of partners that reaches even farther. Our experienced sales teams manage forecasting and order fulfillment, if desired also through third-party logistics or distribution networks. Our services include * Global Account and Key Account Management, * highly sophisticated channel partners who can support sampling within 24 hours, * fast, reliable response time, * highly reliable inventory management using an integrated CRM/ERP/BI system for smart data analysis and forecasting. Swissbit`s Embedded Storage Solutions OEM`s of various industries require a variety of memory and storage solutions. In contrast to typical consumer devices, Swissbit`s embedded memory and storage solutions are designed for highest reliability under extreme environmental conditions. They come with a large feature set tailored to the demands of the industrial, automotive, and NetCom markets and with our commitment to long-term availability. Swissbit`s embedded memory and storage solutions portfolio covers all relevant interfaces and form factors including SD and microSD memory cards, CompactFlashTM and CFastTM cards, 2.5" PATA and SATA SSDs, SLIM SATA and mSATA SSDs, M.2, USB Flash Drives (UFD) and modules. Our sophisticated Flash handling algorithms optimize performance and life of the Single Level Cell (SLC) and Multi Level Cell (MLC) NAND Flash used in our products. SLC Chip Capacity Cost per Bit Product development according to stringent design rules and extensive product qualification procedures ensures the electrical and mechanical robustness of Swissbit`s embedded storage solutions. All products are offered in commercial (0C to +70C) and industrial (-40C to +85C) temperature ranges. Available Flash handling features include diagnostic information, built-in error correction, bad block management, static and dynamic wear leveling and power fail protection. Our service team can offer product life time calculations for special use cases with specific workloads. The diagnostic features we provide enable our customers to access device state information and schedule replacements before the system stops working. EM-MLC MLC TLC ++ +++ +++ ++++ ++++ +++ ++ + Reliability & Endurance ++++ +++ ++ + Industrial Temperature ++++ +++ +++ + Write Performance ++++ ++ +++ + + ++ ++ ++++ Data Retention ++++ ++ +++ + Longevity ++++ +++ ++ + ECC Requirement NAND Flash Technology COMPARISON ++++ highest; +++ high; ++ medium; + low FLASH STORAGE SOLUTIONS 2.5" PATA & SATA SSDs Swissbit offers various 2.5" SSDs with PATA and SATA interfaces. Swissbit's X-500 and X-55 SATA II SSDs are designed as a rugged and extremely reliable storage solution for stable operation in harsh environmental conditions such as wide temperature range, shock, vibration, or humidity. They use the most reliable SLC (X-500) or EM-MLC (X-55) NAND Flash available on the market today and comprise a large number of features. These features include various options for Secure Erase, Purge, and Sanitize methods as well as detailed, S.M.A.R.T. based Life Time Monitoring tools that allow the user to have full control of mission critical data at any given time. The BCH-ECC (error correction code) in combination with an intelligent power fail protection mechanism guarantees the highest possible data reliability. Special features such as ATA-8, NCQ, and TRIM commands enable higher sequential and random performance while providing the high level of reliability required in industrial applications. X-500 SSDs are the ideal solution for applications requiring the highest level of endurance or maximum longevity. The X-55 series were designed for industrial applications with a balanced read / write workload and offer more than ten times the endurance of SSDs using standard MLC. The P-120 (PATA) and X-200 (SATA II) complement Swissbit's 2.5" SSD product portfolio and are an ideal fit for low-to medium-density applications. They are designed for longterm industrial use and support key requirements such as long data retention, no compromise power fail safety, and long product life cycles. LOCKING/LATCHING SATA CONNECTOR Swissbit`s X-500 and X-55 SSDs are designed with a latching SATA connector. Multiple notches support the latching cables for highest vibration and shock resistance. X-55 X-500 X-200 p-120 Industry Leading; 10 default implemented; FLASH STORAGE SOLUTIONS on request; not available Cross section Series Name 2.5" SATA 2.5" SATA 2.5" SATA 2.5" PATA SSD SSD SSD SSD X-55 X-500 X-200 P-120 Interface Data Transfer Mode SATA II - 3 Gbit/s up to UDMA6 / PIO4/ MDMA2 15 + 7 pin Serial ATA with latch protection / special feature connector Connector Outline Dimensions Flash Type IDE / PATA up to UDMA4 / PIO4 / MDMA2 15 + 7 pin Serial ATA ATA 44 pin, 2 mm pitch 100.2 x 69.85 x 9.3 mm 100.2 x 69.85 x 9 mm EM-MLC SLC Density Range 30 GB - 480 GB Data Retention 5 years @ life begin 3 months @ life end Endurance 420 / 310 TBW (60 GB, JESD219 Client / Enterprise workload) 16 GB - 512 GB 4 GB - 8 GB 4 GB - 32 GB 10 years @ life begin 1 year @ life end 2700 / 370 TBW (64 GB, JESD219 Client / Enterprise workload) 100,000 P/E cycles (Flash cell level) Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -55C to +95C -50C to +100C Performance Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS) up to 300 up to 240 up to 160 up to 14,800 up to 3,200 up to 300 up to 240 up to 220 up to 14,500 up to 5,300 up to 300 up to 120 up to 95 up to 3,100 up to 25 up to 66 up to 45 up to 35 up to 3,840 up to 51 MTBF 2,000,000 hours 2,500,000 hours Shock MIL-STD810; 2,000 G, 0.4 ms; 50 G, 11 ms 1,500 G MIL-STD810; 20 G, 10-2,000 Hz random 20 G Vibration Humidity Voltage Power Consumption 85 % RH 85C, 1,000 hrs 5 V 10 % 3.3 V optional Slumber 140 mA max 700 mA Idle 200 mA 5 V 10 % PIO typ 55 mA max 160 mA Idle 5 mA max 320 mA Idle 140 mA Proven Power Fail Safety ATA security feature set Enhanced Secure Erase, Purge and Sanitize features (MIL STD) Features & Tools NCQ, TRIM Advanced Wear Leveling & Bad Block management In-field firmware update Proven Power Fail Safety Security Features available Wear Leveling & Bad Block management SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Part Number SFSAxxxxQvBJxss-t-dd-rrr-ccc SFSAxxxxQvBRxss-t-dd-rrr-ccc SFPAxxxxQvBOxss-t-dd-rrr-ccc FLASH STORAGE SOLUTIONS 11 SATA SSD Modules Swissbit's mSATA (MO-300), SLIM SATA (MO-297), and the new M.2 SSDs are ideal solutions for embedded applications requiring solid state storage in smaller, removable form factors. Our SATA SSD modules offer a long service life combined with controlled BOM and a change notification process. Each unit undergoes extensive testing over the full temperature range before being released for shipment. The X-60 SATA III series is Swissbit's solution for high performance, cost sensitive, high capacity markets. The SSD modules will be available as mSATA (X-60m), SLIM SATA (X-60s), and M.2 (X-60m2). They were designed for all industrial, NetCom, and automotive applications requiring high data transfer rates up to 525 MB/s in sequential access and 79,000 IOPS in 4 KB random access. In addition, they offer a wide range of features such as Swissbit's proven Power Fail Safety, ATA security feature set, Data Care Management tools, a Windows or Linux tool and SDK for detailed S.M.A.R.T.-based Life Time Monitoring, NCQ, TRIM, advanced wear leveling & bad block management and in-field firmware update functionality. The newly introduced SLC-based X-600 series are highly reliable storage solutions with outstanding endurance and are available with the same set of features as the X-60 products. They are built using the most reliable SLC Flash on the market and an industrial grade SATA III controller and operate from -40C to +85C. SATA 2.5" SOLID STATE DRIVE M.2 2280 M.2 2260 69.85 mm 22.00mm X-600m / X-60m X-600s / X-60s X-600m2 / X-60m2 X-200m X-200s 12 default implemented; FLASH STORAGE SOLUTIONS on request; not available 39 mm 36.40 mm 50.80 mm 54 mm 22.00mm Product size comparision Industry Leading; mSATA SSD MO-300 full size CFastTM card 60.00 mm 80.00 mm 100.20 mm SLIM SATA SSD MO-297 29.85mm 42.80mm SLC BASED MODULES MO-300 MO-297 M.2 MO-300 MO-297 Full Size slim SATA 2242 / 2260 / full size slim SATA X-200m X-200s 2280 Series Name X-600m X-600s Interface Data Transfer Mode X-600m2 SATA III - 6 Gbit/s ATA8 SATA II - 3 Gbit/s up to PIO4, MDMA2, UDMA6 Connector 52 pos. Edge Connector PCI Express (PCIe) mini 15 + 7 pin Serial ATA Connector 75 pos. Edge Connector B & M key 52 pos. PCI Express (PCIe) mini 15 + 7 pin Serial ATA Connector Outline Dimensions 50.8 x 29.85 x 3.3 mm 54 x 39 x 4 mm 22 x 42 / 60 / 80 x 3.6 mm 50.8 x 29.85 x 3.3 mm 54 x 39 x 4 mm Flash Type Density Range SLC 8 GB - 120 GB 15 GB - 120 GB 8 GB - 60 GB (2242) 8 GB - 120 GB (2260 / 2280) 2 GB - 64 GB 10 years @ life begin 1 year @ life end Data Retention max 9.8 TBW per GB drive capacity (per JESD219) Endurance 100,000 P/E cycles (Flash cell level) Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -50C to +100C Performance up to 600 up to 520 up to 400 up to 75,000 up to 75,000 Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS) up to 300 up to 120 up to 95 up to 3,100 up to 25 Voltage 3.3 V 5 % 5 V 10 % 3.3 V 5 % 3.3 V 5 % 5 V 10 % Power Consumption typ 450 mA max 800 mA Idle 110 mA typ 300 mA max 550 mA Idle 60 mA typ 450 mA max 800 mA Idle 110 mA typ 300 mA max 490 mA Idle 180 mA typ 260 mA max 320 mA Idle 140 mA Features & Tools Proven Power Fail Safety Proven Power Fail Safety NCQ, TRIM Advanced Wear Leveling & Bad Block management Advanced Wear Leveling & Bad Block management In-field firmware update SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Part Number SFSAxxxxUvAAxss-t-dd- SFSAxxxxVvAAxss-t-ddrrr-ccc rrr-ccc SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring SFSAxxxxMvAAxss-t-dd- SFSAxxxxUvBRxss-t-dd- SFSAxxxxVvBRxss-t-ddrrr-ccc rrr-ccc rrr-ccc X-600 series: target specification FLASH STORAGE SOLUTIONS 13 Flash life time prediction The endurance of Flash based products is one of the most controversial aspects of this technology. NAND Flash component suppliers specify the endurance of their products based on the number of allowed PE (program / erase) cycles before Flash cell degradation reaches a level exceeding the controller's error correction capability. SLC components allow 100,000 PE cycles per block while MLC is typically specified as 3,000 PE cycles. This transparency of NAND component endurance is no longer provided for integrated Flash cards with controllers and firmware. For each write that the host initiates, the Flash controller has to perform internal management steps and may need to erase and write multiple blocks even at the smallest external write transfer size. The ratio between internal write data volume and the external request size is called WAF (write amplification factor). The WAF can vary between one (theoretical best case) and several hundred depending on card structure, Flash components used, firmware architecture, and user-application write profile. The WAF directly influences the IOPS rate but the endurance even more. With a WAF of 100, internal PE cycles are 100 times greater than expected from the external data rate, and the endurance limit is reached 100 times faster than anticipated. Customer application use cases have a huge impact on the WAF. For example data base applications can cause catastrophic numbers of small writes to the disk that wear out the Flash in shortest time frame. In most cases, how the software`s access profile will translate into Flash writes can hardly be predicted. Swissbit supports a realistic prediction of the WAF and the endurance of their SSDs and storage cards with help of the Swissbit Life Time Monitoring Tool and statistical data stored into the Flash by the firmware. This tool can read out usage data such as number of writes, number of erase cycles, the bad block statistic, the successful ECC correction, and much more. The realistic predicted endurance can be calculated following this procedure: * Dump the status of a Swissbit Flash product as initial state with help of the Swissbit Life Time Monitor. * Run your real-life application for a defined period of time, e.g., seven days. * Dump the product`s status after finishing the test run. Send the initial and final dump to the Swissbit FAE team which will happily provide you with the calculated life expectancy of this card in your application. If you have confidential applications where you don`t want to disclose the results, Swissbit will instruct you how to extrapolate the recorded number of PE cycles into the life expectancy. The Swissbit Life Time Monitor can also be used to visualize the detailed S.M.A.R.T. status and history of Swissbit`s Flash products. The Swissbit Life Time Monitor is available as stand-alone executables for Windows or Linux, or as an API to be integrated into the customer`s software architecture. Swissbit also offers to port the tool into an existing embedded application. The monitor can be run as a background process in minimized mode in the system tray where it displays the current device S.M.A.R.T. status and performs periodic snapshots of the statistical values for a complete device life history. 14 FLASH STORAGE SOLUTIONS MLC BASED MODULES Series Name MO-300 MO-297 M.2 Full Size slim SATA 2242 / 2260 / 2280 X-60m X-60s X-60m2 Interface Data Transfer Mode SATA III - 6 Gbit/s ATA8 Connector 52 pos. Edge Connector PCI Express (PCIe) mini 15 + 7 pin Serial ATA Connector 75 pos. Edge Connector B & M key Outline Dimensions 50.8 x 29.85 x 3.3 mm 54 x 39 x 4 mm 22 x 42 / 60 / 80 x 3.6 mm Flash Type MLC Density Range 30 GB - 240 GB (2242) 30 GB - 480 GB (2260 / 2280) 8 GB - 480 GB 10 years @ life begin 1 year @ life end Data Retention max. 1.9 TBW per GB drive capacity (per JESD219) Endurance Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -50C to +95C Performance up to 600 up to 525 up to 450 up to 75,000 up to 79,000 Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS) Voltage 3.3 V 5 % 5 V 10 % 3.3 V 5 % Power Consumption typ 450 mA max 800 mA Idle 110 mA typ 300 mA max 550 mA Idle 60 mA typ 450 mA max 800 mA Idle 110 mA Proven Power Fail Safety NCQ, TRIM Features & Tools Advanced Wear Leveling & Bad Block management In-field firmware update SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Part Number SFSAxxxxUvAAxss-t-dd-rrr-ccc SFSAxxxxVvAAxss-t-dd-rrr-ccc SFSAxxxxMvAAxss-t-dd-rrr-ccc X-60 series: target specification FLASH STORAGE SOLUTIONS 15 CFastTM Cards CFastTM cards combine two existing industry standards into a single product: the CompactFlashTM (CF) card form factor and the Serial ATA (SATA) interface commonly used in hard disks. CFastTM cards can replace both HDDs and CompactFlashTM cards in applications requiring small form factors, high endurance and the ability to withstand shock, vibration, extreme temperatures (-40C to +85C), high altitude and rough environmental conditions. Swissbit's CFastTM cards provide rugged storage for embedded and industrial systems where performance, data and system reliability, power fail protection and flexibility are important design considerations. Swissbit CFastTM cards operate with a 3.3 Volt low power source and support three SATA power management states: Active, Partial, and Slumber. This standard is a perfect choice for both boot devices and as removable media for applications requiring low to medium storage densities with a small footprint. Additionally, the Swissbit CFastTM cards come with full engineering and customization support, S.M.A.R.T. based Life Time Monitoring features, our intelligent Flash Management algorithms and Error Correction, guaranteeing the highest level of reliability even in rough application environments. Swissbit's latest innovations are the F-60 / F-600 SATA III CFastTM card series. Using state of the art controllers and MLC / SLC Flash technology, the F-60 / F-600 achieve data transfer rates up to 525 MB/s in sequential access and 70,000 IOPS in 4 KB random access. In addition, the F-60 / F-600 series feature Swissbit's proven Power Fail Safety, ATA security feature set, enhanced Secure Erase tools, a Windows or Linux tool and SDK for detailed S.M.A.R.T.-based Life Time Monitoring, NCQ, TRIM, advanced wear leveling and bad block management or in-field firmware update functionality. F-600 F-60 F-240 Industry Leading; 16 default implemented; FLASH STORAGE SOLUTIONS on request; not available Series Name CFastTM Card CFastTM Card CFastTM Card F-600 F-60 F-240 CFastTM 2.0 - SATA III - 6 Gbit/s ATA8 Interface Data Transfer Mode Connector CFastTM Type I Outline Dimensions 36.4 x 42.8 x 3.6 mm Flash Type SLC MLC Density Range 8 GB - 60 GB 16 GB - 240 GB SLC Data Retention Endurance CFastTM 1.0 - SATA II - 3 Gbit/s ATA7 2 GB - 64 GB 10 years @ life begin 1 year @ life end 9.8 TBW per GB drive capacity 1.9 TBW per GB drive capacity 100,000 P/E cycles (Flash cell level) Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -50C to +100C Performance Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS) up to 600 up to 520 up to 340 up to 70,000 up to 40,000 up to 600 up to 525 up to 340 up to 70,000 up to 40,000 up to 300 up to 130 up to 100 up to 3,300 up to 95 MTBF 2,500,000 hours Shock 1,500 G Vibration 20 G Humidity 85 % RH 85C, 1,000 hrs Voltage Power Consumption 3.3 V 5 % typ max 450 mA 650 mA typ max 450 mA 650 mA typ 140 mA max 250 mA 55 mA Idle PHYSLP <20 mA Proven Power Fail Safety Sophisticated Wear Leveling & Bad Block management Proven Power Fail Safety NCQ, TRIM Features & Tools Advanced Wear Leveling & Bad Block management In-field firmware update SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Read Disturb Management TRIM Low Power Consumption Security & SBZoneProtection features available SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Evaluation kit with 2.5" SATA adapter board available Part Number SFCAxxxxHvAAxss-t-dd-rrr-ccc SFCAxxxxHvAAxss-t-dd-rrr-ccc SFCAxxxxHvBVxss-t-dd-rrr-ccc F-600 series: target specification FLASH STORAGE SOLUTIONS 17 CompactFlashTM Cards To this day, CompactFlashTM (CF) cards are still the most popular Flash-based storage solution used in the embedded and industrial markets and the CompactFlashTM card form factor and connector are well established. Swissbit`s CF cards were developed with strong focus on quality, reliability, robustness, and longevity. We select only high-quality components and apply design rules fitting the stringent requirements of our customers. Hardware and firmware were tested and qualified by our experienced technical team and features and functionality have been proven in many challenging customer applications. Swissbit`s CF Series C-3x0 and C-4x0 are offered in both commercial (0C to +70C) and industrial (-40C to +85C) temperature ranges, providing rugged, reliable memory for a wide range of demanding use cases. They are designed to address a broad range of concerns from compatibility, booting, and power fail safety to long-term supply, controlled BOM, and outstanding Flash protocolhandling techniques to ensure highest possible data integrity. In contrast to commonly promoted sequential performance values, Swissbit is especially focused on optimized random-access speed, one of the key requirements in legacy embedded CompactFlash applications. Swissbit's most recent CF card product family is the C-300 Longevity series, which offers maximum long-term availability (until at least 2021). In addition, the C-300 Longevity CF card ensures optimized backward compatibility with legacy systems, high random access speed, and a wide range of capacities from 32 MB to 8 GB using highly reliable SLC Flash with 100,000 program / erase cycles. C-300 C-300 Longevity C-320 C-440 Industry Leading; 18 default implemented; FLASH STORAGE SOLUTIONS on request; not available Longevity Series Name CompactFlashTM CompactFlashTM CompactFlashTM CompactFlashTM Card Card Card Card C-300 C-300 Longevity C-320 C-440 Interface Data Transfer Mode CFA5.0 True IDE / PC card - Up to UDMA6, MDMA4 & PIO6 CFA4.1 True IDE / PC card - Up to UDMA4, MDMA4 & PIO6 Connector CFC Type I Outline Dimensions 36.4 x 42.8 x 3.3 mm Flash Type Density Range UDMA6 CF SLC 128 MB to 8 GB 32 MB to 8 GB 2 GB to 32 GB 2 GB to 64 GB 10 years @ life begin 1 year @ life end Data Retention 100,000 P/E Cycles (Flash Cell Level) Endurance Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -50C to +100C Performance Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS) up to 66 up to 37 up to 20 up to 3,300 up to 40 up to 66 up to 37 up to 20 up to 3,300 up to 50 up to 66 up to 45 up to 35 up to 2,800 up to 44 MTBF 3,000,000 hours Shock 1,500 G Vibration 20 G Humidity 85 % RH 85C, 1,000 hrs 3.3 V 5 % 5 V 10 % Voltage Power Consumption up to 133 up to 65 up to 40 up to 2,400 up to 300 (with TRIM) PIO typ 50 mA @ 3.3 V DMA typ 70 mA @ 3.3 V DMA typ 110 mA @ 5 V PIO typ 60 mA @ 3.3 V DMA typ 90 mA @ 3.3 V DMA typ 130 mA @ 5 V PIO typ DMA typ DMA typ 60 mA @ 3.3 V 80 mA @ 3.3 V 90 mA @ 5 V Proven Power Fail Safety Sophisticated Wear Leveling & Proven Power Fail Safety Features & Tools Sophisticated Wear Leveling & Bad Block management Security & SBZoneProtection features available SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Bad Block management Read Disturb Management TRIM Security & SBZoneProtection features available SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Part Number SFCFxxxxHxBKxss-t-xx-rrr-ccc SFCFxxxxHxBKxss-t-xx-rrr-ccc SFCFxxxxHxBOxss-t-dd-rrr-ccc SFCFxxxxHvBUxss-t-dd-rrr-ccc FLASH STORAGE SOLUTIONS 19 Flash Management Mechanism - Optimized error correction code - Efficient algorithms for bad block management - Real life time monitoring - Sophisticated wear leveling and bad block management - Power fail protection microSD Memory Cards Swissbit`s Industrial microSD memory cards are designed, manufactured and tested to withstand extreme environmental conditions. Each of our product series is designed for a broad, embedded use case with its unique requirements for longevity, service life, endurance, temperature, data retention, and cost. In addition to the existing microSD memory card series, Swissbit has recently introduced the S-40u, which targets read-centric applications requiring the highest level of data reliability for long periods of time. The combination of MLC (multi level cell) NAND Flash with innovative controller and firmware technology enables prolonged data retention and extended life cycles despite the write endurance limitations of MLC Flash. The special firmware features in the S-40u include powerful built-in error correction, read retry, autonomous data care management, life time monitoring and diagnostic features, randomizer, wear leveling and bad block management algorithms, and intelligent power fail protection. The new S-45u (MLC version) and S-450u (SLC version) series include the same set of sophisticated features and, through the implementation of UHS-I, support data transfer rates of up to 80 MB/s. All Swissbit microSD cards can withstand extreme environmental conditions. They provide the highest level of mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD connectors endure a minimum of 20,000 insertion cycles. S-300u S-200u S-40U/S-45U S-450u Industry Leading; 20 default implemented; FLASH STORAGE SOLUTIONS not available microSD microSD microSD microSD microSD Memory Memory MEMORY MEMORY MEMORY Card Card CARD CARD CARD (SD / SDHC) (SD) (SDHC) (SDHC) (SD / SDHC) Series Name S-300 S-200 S-40 S-45 S-450 Interface Data Transfer Mode SD 2.0, Class 6 / 10 SD 2.0, Class 6 SD 3.0, Class 6 Connector microSD Outline Dimensions 15 x 11 x 0.7 / 1 mm Flash Type Density Range SLC 1 GB - 2 GB (SD) 4 GB - 8 GB (SDHC) MLC 512 MB - 2 GB (SD) SLC 512 MB - 2 GB (SD) 4 GB - 8 GB (SDHC) 4 GB - 32 GB (SDHC) 10 years @ life begin 1 year @ life end Data Retention 100,000 P/E Cycles (Flash Cell Level) Endurance 3,000 P/E Cycles (Flash Cell Level) 100,000 P/E Cycles (Flash Cell Level) Extended: -25C to +85C Industrial: -40C to +85C Operating Temperature Storage Temperature SD 3.0, Class 10, UHS-I -40C to +85C -40C to +100C Performance Burst Rate (MB/s) up to 25 Sequential Read (MB/s) up to 24 Sequential Write (MB/s) up to 22 up to 25 up to 21 up to 18 up to 25 up to 24 up to 14 up to 104 up to 50 up to 19 Optimized for random write IOPS MTBF 3,000,000 hours Shock 1,500 G Vibration Humidity 50 G 93 % RH 40C, 500 hrs 85 % RH 85C, 1,000 hrs Voltage Power Consumption up to 104 up to 30 up to 24 2.7 - 3.6 V Read typ Write typ 50 mA 50 mA Read typ Write typ 30 mA 40 mA Read typ Write typ Normal 40 mA 60 mA Read typ Write typ 100 mA 100 mA Proven Power Fail Safety Proven Power Fail Safety Features & Tools Sophisticated Wear Leveling & Bad Block Advanced Wear Leveling Management & Bad Block management Diagnostic features Proven Power Fail Safety Sophisticated Wear Leveling & Bad Block management Autonomous Data Care Management SBLTM Tool & SDK for detailed Life Time Monitoring Life Time Monitoring Part Number SFSDxxxxLvBWxss-t-ddrrr-ccc SFSDxxxxNxBNxss-t-ddrrr-ccc SFSDxxxxNxBMxss-t-dd-rrr-ccc S-45: target specification FLASH STORAGE SOLUTIONS 21 Flash Management Mechanism - Optimized error correction code - Efficient algorithms for bad block management - Diagnostic with real life time monitoring - Sophisticated wear leveling and bad block management resistance - Power fail protection SD Memory Cards Swissbit's Industrial Secure Digital (SD) card series are designed, manufactured and tested to withstand extreme environmental conditions. The use of SLC Flash in the S-200 / 220 series combined with an industrial grade Flash controller provide a number of enhanced product features such as built-in error correction, wear leveling and bad block management algorithms, power fail protection, and power saving modes. The housing with special connector support provides resistance against bending and torque. In addition to the existing SD memory card series, Swissbit has recently introduced the S-40, which targets read-centric applications requiring the highest level of data reliability for long periods of time. The combination of MLC (multi level cell) NAND Flash with innovative controller and firmware technology enable prolonged data retention and extended life cycles despite the write endurance limitations of MLC Flash. The special firmware features in the S-40 include a powerful built-in error correction, read retry, autonomous data care management, life time monitoring and diagnostic features, randomizer, wear leveling and bad block management algorithms and intelligent power fail protection. The new S-45 (MLC version) and S-450 (SLC version) series include the same set of sophisticated features and, through the implementation of UHS-I, support data transfer rates of up to 80 MB/s. All Swissbit SD cards can withstand extreme environmental conditions. They provide the highest level of mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD connectors endure a minimum of 20,000 insertion cycles. S-200/220 S-40/S-45 S-450 Industry Leading; 22 default implemented; FLASH STORAGE SOLUTIONS not available SD Memory SD Memory SD Memory SD Memory Card Card Card Card (SD / SDHC) (SDHC / SDXC) (SD / SDHC) (SD / SDHC) Series Name S-200 / 220 S-40 S-45 S-450 Interface Data Transfer Mode SD 2.0, Class 6 / 10 SD 3.0, Class 6 SD 3.0, Class 10, UHS-I Connector SD Outline Dimensions 32 x 24 x 2.1 mm Flash Type SLC Density Range 512 MB - 2 GB (SD) 4 GB - 8 GB (SDHC) MLC 512 MB - 2 GB (SD) 4 GB - 32 GB (SDHC) 10 years @ life begin 1 year @ life end Data Retention Endurance SLC 4 GB - 32 GB (SDHC) 64 GB -128 GB (SDXC) 100,000 P/E Cycles (Flash Cell Level) 3,000 P/E Cycles (Flash Cell Level) Extended: Industrial: Operating Temperature Storage Temperature 100,000 P/E Cycles (Flash Cell Level) -25C to +85C -40C to +85C -40C to +100C Performance Burst Rate (MB/s) up to 25 Sequential Read (MB/s) up to 21 Sequential Write (MB/s) up to 18 up to 25 up to 24 up to 19 up to 104 up to 50 up to 19 Optimized for random write IOPS MTBF 3,000,000 hours Shock 1,000 G Vibration 15 G 1,500 G 50 G Humidity 85 % RH 85C, 1,000 hrs 2.7 - 3.6 V Normal Voltage Power Consumption Read typ Write typ 28 mA 55 mA Proven Power Fail Safety Features & Tools Part Number up to 104 up to 90 up to 75 Sophisticated Wear Leveling & Bad Block management Read typ Write typ 40 mA 60 mA Read typ Write typ 100 mA 100 mA Proven Power Fail Safety Sophisticated Wear Leveling & Bad Block management Autonomous Data Care Management Diagnostic features & Life Time Monitoring through SD / SPI command set SBLTM Tool & SDK for detailed Life Time Monitoring SFSDxxxxLvBNxss-t-dd-rrr-ccc SFSDxxxxLxBMxss-t-dd-rrr-ccc S-45: target specification FLASH STORAGE SOLUTIONS 23 USB Flash Drives / Modules The Universal Serial Bus (USB) interface is very well established and has almost entirely replaced any other forms of serial or parallel interfaces for computer peripherals and memory storage devices. Advantages of USB are its flexibility, fast sequential data transfer rate, and the ability to obtain power through the connector. Most computer and embedded systems support these devices either via the standard USB connector or internal, on-board terminal headers. Swissbit offers both options in different form factors and in commercial and industrial operating temperature ranges. State of the art NAND Flash handling algorithms, stringent component selection, product change control, and a 100% in-process final system test at full temperature range (-40C to +85C) qualify Swissbit's USB Flash Drive (UFDs) for embedded and industrial markets. Swissbit's U-110 and U-4x Series (USB Flash Module) offers a no compromise Flash based storage solution for: * embedded PCs that need a rugged reliable storage solution, * servers with backup or recovery functionality, and * general industrial computers needing easy-to-use boot media. All Swissbit USB solutions combine security features and Life Time Monitoring tools for product life control. U-45 U-400 U-110 unitedCONTRAST II default implemented; 24 on request; FLASH STORAGE SOLUTIONS not available Series Name eUSB Flash eUSB Flash eUSB Flash Module Module Module U-400 U-45 U-110 USB FLASH DRIVE unitedCONTRAST II USB 2.0 Interface Data Transfer Mode High / Full Speed Standard: Low Profile: Connector 2.54 mm - 10 Pin (key option) 2.00 mm - 10 Pin (key option) USB 2.0 A-Plug Standard: 36.8 mm x 26.65 mm x 9.6 mm Low Profile: 36.8 mm x 26.65 mm x 5.7 mm Outline Dimensions 68.0 mm x 18.0 mm x 8.0 mm Flash Type SLC MLC (pSLC mode option) SLC SLC Density Range 1 GB to 16 GB (32 GB opt.) 4 GB to 32 GB 1 GB to 16 GB 512 MB to 16 GB 10 years @ life begin 1 year @ life end Data Retention Endurance 100,000 P/E Cycles (Flash Cell Level) 3,000 P/E Cycles (Flash Cell Level) 100,000 P/E Cycles (Flash Cell Level) Commercial: 0C to +70C Industrial: -40C to +85C Operating Temperature Storage Temperature -50C to +100C Performance Burst Rate (MB/s) Sequential Read (MB/s) Sequential Write (MB/s) Random 4KB Read (IOPS) Random 4KB Write (IOPS up to 60 up to 37 up to 26 up to 1,600 up to 30 up to 60 up to 32 up to 23 up to 650 up to 650 up to 60 up to 32 up to 23 up to 1,600 up to 30 MTBF 3,000,000 hours Shock 50 G Vibration 15 G Humidity 85 % RH 85C, 500 hrs Voltage Power Consumption 5 V 10 % (3.3 V 5 % optional) 3.3 V 5 % / 5 V 10 % Full Speed typ High Speed typ Proven Power Fail Safety Proven Power Fail Safety Windows / Linux - Spare block read out Bootable USB Drive Hot Pluggable / Plug & Play Supports latest OS as Fixed Drive Optimized Wear Leveling Connector pitch variations available Security features Shock & vibration resistant Part Number 2.54 mm: SFUIxxxxJvABxss-t-dd-rrr-ccc 2.00 mm: SFUIxxxxKvABxss-t-dd-rrr-ccc 5 V 10 % Full Speed typ 80 mA High Speed typ 100 mA 90 mA 100 mA Windows / Linux - Spare block read out Features & Tools up to 60 up to 32 up to 23 up to 1,600 up to 30 Password manager available 2.54 mm: SFUIxxxxJvBPxss-t-dd-rrr-ccc 2.00 mm: SFUIxxxxKvBPxss-t-dd-rrr-ccc SFU2xxxxEvBPxss-t-dd-rrr-ccc U-4x: target specification FLASH STORAGE SOLUTIONS 25 Security SOLUTIONS Security is becoming mandatory in diverse markets. Data breaches and compromised IT environments are becoming a reality. Customers and solution providers are rightly concerned about risks, creating a necessity to improve security in a reliable and flexible fashion. That GSM calls can easily be tapped has been widely publicized in the telecommunications market. Reports about the mass interception of Internet data on a global scale compromise trust in the privacy of communications. Sophisticated attacks on industrial facilities raise questions about liability and reliability. A new class of threats and risks needs consideration. Consumers, governments, enterprises, and industry are affected by security breaches directly or indirectly, visible or invisible. Swissbit supports its customers in industrial, medical, government, telecommunications, and the banking sector in delivering secure systems. Each and every system requires storage to operate. While globally recognized as a leader in highly reliable Flash memory solutions, Swissbit also designs, develops, and manufactures security products that provide additional security functions and features. Swissbit demonstrates a continuous, uninterrupted migration path towards secure systems while maintaining the reliability and flexibility of existing memory form factors. Swissbit offers product related services: * * * * Security firmware and drivers Logo printing Optical and electronic personalization Design-in of consigned smart card chips As well as extended services: * * * * * 26 SECURITY SOLUTIONS Security consulting Security training Customer support Design-in support Connection with eco-system partner network for turn key solutions and quick time to market Security Products - PS-100u Series The security product series in the microSD form factor addresses the growing demand for mobile and portable security. The products offer tangible hardware security in the same manner as the plug and play approach. For various markets, Swissbit offers a broad set of security use cases. The Flash memory can be used by any host to store data on the cards at high speed. Additional security functions of the card can be activated to protect any data. Valuable data such as sensitive files, emails, photos, and even voice calls can be protected by encryption, access protection, or made resistant to tampering by digital signature. The best fitting product can be chosen depending on the use case. Our PS-100u series provides high security by the optional smart card chip or by the Swissbit security firmware. The block diagram below illustrates the architecture of the Swissbit Security Interface, the Flash Controller, and the Encrypted Flash Chip. The Swissbit Security Interface empowers solution providers to build applications on various platforms. An SDK is available to develop applications on WindowsTM and LinuxTM PC platforms and on mobile phones and tablets like AndroidTM and BlackBerryTM. AES Partner and Customer solutions (like applications, services, middleware, license control) Swissbit Security Interface Flash Memory Controller APP with Swissbit Security Firmware (optional) Secure Element Java Applet (Encrypted) Flash Memory SECURITY SOLUTIONS 27 Security Products SECURITY SOLUTIONS PS-100u SE/ VE/ PE FE Compliance SD 3.0 SD, ASSD V1.1 SD 3.0 SD, ASSD V1.1 Data transfer SPI mode supported Speed class 10 SPI mode supported Speed class 10 Density 4 GB / 8 GB / 16 GB 8 GB / 16 GB Temperature Extended: -25C to +85C Extended: -25C to +85C Security Infineon SLE 78 smart card chip CC EAL 5+ HW and OS Java card 3.0.4 Global Platform 2.2.1 Smart card OS jTop ID Infineon SLE 78 smart card chip FIPS 140-2 level 3 Java card V2.2.x (ext. of V3.0) Global Platform 2.2.1 Gemalto ID Core 30 RSA up to 2048 bit optional ECC up to 512 / 521 bit AES up to 256 bit SHA2 up to 512 bit RNG AIS31, FIPS-140 RSA up to 2048 bit ECC up to 512 / 521 bit AES up to 256 bit SHA2 up to 512 bit Compatible Middleware: * AET SafeSign * Charismathics * Cryptovision Compatible Middleware: * Gemalto 80 k EEPROM secure storage 160 k EEPROM secure storage WinXP, 7, 8, Vista, Linux, BlackBerry, Android SDK available WinXP, 7, 8, Vista, Linux, BlackBerry, Android SDK available Drivers / API 28 PS-100u Security The Standard Edition PS-100u SE fits best into authentication and PKI (Public Key Information) use cases. The card is supported by leading middleware vendors in mobile, desktop, and tablet use cases to ensure a seamless design-in into existing security infrastructures. Typical applications are: * mobile email encryption, * digital signature, * user authentication for PC and mobile login, and * true random number generation. The Voice Edition PS-100u VE provides Elliptic Curve Cryptography. The enormous advantage of computation and security combined with small certificate sizes makes the PS-100u VE card ideal for online key and certificate exchange. Solution providers choose the PS-100u VE card to build secure mobile voice solutions. The users (caller and person called) only need to enter their PIN into their mobile device and the security chip performs end-to-end encryption on their behalf. All encryption keys for authentication and key agreements remain highly protected in the card at all times. Only AES key stream segments suitable for voice stream encryption are passed to the mobile host application. The PS-100u VE extends the features of the PS-100u SE. The PS-100u DP and PS-100u PE cards provide Flash memory encryption, secure logging, and flexible CD-ROM storage. The PS-100u PE offers asymmetric and symmetric cryptography by the embedded smart card, whereas the PS-100u DP offers symmetric encryption without smart card. The PS-100u FE provides a secure element according FIPS 140-2 certification. US governmental organizations and enterprises that need to follow the FIPS 140-2 security standard now benefit from smart integration into the microSD form factor. K H KNOW + HAVE PS-100u SE PS-100u VE PS-100u FE PS-100u PE PS-100u DP supported; not available; SECURITY SOLUTIONS 29 MEMORY SOLUTIONS Swissbit commits to offering the highest quality, JEDEC standard and customized DRAM modules for industrial applications. As a DRAM module manufacturer, we use strategic multiple sources of DRAM suppliers to offer our customers a reliable, long-term supply of leading edge and legacy memory module products. Special focus is put into working with suppliers that offer extended availability of DRAM die revisions, avoiding frequent requalification efforts with our customers. Swissbit's quality focus starts with sourcing the highest quality DRAMs and utilizing fully compliant JEDEC module raw cards either as in-house PCB design or from top quality design partners. For all modules, the passives and other active components selected are of the highest available quality. Using surface mount technology (SMT) processes in production on fully certified facilities in Germany allows Swissbit to sustain a quality focus during the entire assembly process. Traceability is guaranteed through the complete manufacturing and testing flow. We ensure the highest quality level for our customers with world class application testing. Swissbit uses in-house developed application software to test 100 % of all modules under real-world conditions with diverse pattern and stress methods and to cover the complete memory array including ECC components by constantly adapting to the latest memory controller features. For industrial temperature grade modules the application tests are performed at -40C and +85C T AMBIENT. With a stringent internal product qualification, fast customer return processing and the dedication to always be an improving company, Swissbit constantly works on providing its customers the best DRAM modules available on the market at a competitive price. Swissbit is committed and able to design, manufacture, and test customer-specific module solutions. We offer PCB design and layout services, development of individual test solutions, thermal simulations, DRAM component sourcing, controlled manufacturing, and special coating options. By using Swissbit DRAM modules, you can keep the total system cost to a minimum. 30 DRAM MODULES DRAM SPECIFIC OPTIONS DDR1 DIMM /RDIMM DDR1 SODIMM / SO-RDIMM DDR2 DIMM /RDIMM DDR2 SODIMM DDR3 DIMM DDR3 RDIMM DDR3 MiniDIMM DDR3 SODIMM / SO-UDIMM DDR3 XR-DIMM default implemented; on request; not available DDR4, FASTER AT LOW POWER With its architectural features and the subsequent extension to 1.35 V, DDR3 technology had the widest range of data rates. But the end of DDR3 technology's evolution has finally come. Further improvements were necessary to open a path for even higher data rates. The new JEDEC standard, DDR4 addresses, these requirements. Its spec targets a doubling of the data rate from today's DDR3-1600 to a blazing DDR4-3200. The introduction of DDR4 already starts at 2133 Mb/s and offers a 30% higher bandwidth compared to main stream DDR3L speed. At the same time, the operating voltage could be reduced from 1.35 V to 1.20 V. Together with several new power saving features like an improved termination scheme, data bus inversion, and grouping of banks, the total power consumption and heat dissipation has been significantly reduced vis-a-vis DDR3L. The DDR4 standard also adds reliability features like CRC and command / address bus parity. DDR4 has been fully standardized at JEDEC and the most recent memory controllers support it. Swissbit will offer a complete portfolio of DDR4 modules as JEDEC releases them, focusing on the form factors that are most important to the industrial market, beginning with ECC SODIMMs. MEMORY SOLUTIONS 31 RUGGEDIZED DIMMS Designers of rugged platforms face a difficult decision when planning their memory layout: either they use DRAM components directly soldered to the system board, the most rugged but also expensive and inflexible solution, or they try to ruggedize standard SODIMMs by using straps or glue to fasten them in their sockets. In cooperation with the SFF-SIG consortium (Small Form Factor-Special Interest Group), Swissbit has developed a rugged module called XR-DIMMTM, the abbreviation XR standing for eXtreme Rugged. Using special mezzanine connectors and mounting holes to attach the module to the system board creates a truly rugged system with the easy integration and flexibility of DIMM solutions and the shock and vibration immunity of memory down implementations. The XR-DIMM closely follows the DDR3 72 bit SODIMM standard and makes design-in as easy as using a JEDEC module, unburdening the system designer from memory channel layout. With multiple module densities, the system integrator can create different memory populations with one system platform, avoiding multiple system board SKUs and taking advantage of perfectly tested modules with a just-in-time purchase option. Memory down SODIMM with fixture XR-DIMM Design-in/ Layout Difficult Easy Easy Flexibility of memory population Difficult Easy Easy Testability after soldering Medium Easy Easy Upgrade /Repair Difficult Easy Easy Small to Medium Medium to Small Medium to Small No Yes Yes Good Medium (with glue / strap) Good Required board space Stackable solution Protection against shock Protection against Vibration MEMORY COST 32 MEMORY SOLUTIONS Good Bad Good Low to Medium Low Medium UNBUFFERED DIMM PRODUCTS LONG UDIMM /WITH AND WITHOUT ECC Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR4-UDIMM 2133 / CL15 4 GB - 16 GB x64 31.25 mm 1.20 V 260 SHUxxx64xxxxxxx-ssR BGA DDR3L-UDIMM 1600 / CL11 2 GB - 8 GB x64 1.18" (29.97 mm) 1.35 / 1.50 V 240 SLUxxx64xxxxxxx-ssR BGA DDR3L-UDIMM ECC 1600 / CL11 2 GB - 8 GB x72 1.18" (29.97 mm) 1.35 / 1.50 V 240 SLUxxx72xxxxxxx-ssR BGA DDR2-UDIMM 800 / CL6 512 MB - 2 GB x64 1.18" (29.97 mm) 1.80 V 240 SEUxxx64xxxxxxx-ssR BGA DDR2-UDIMM ECC 800 / CL6 1 GB - 2 GB x72 1.18" (29.97 mm) 1.80 V 240 SEUxxx72xxxxxxx-ssR BGA DDR1-UDIMM 400 / CL3 512 MB - 1 GB x64 1.25" (31.75 mm) 2.50 V 184 SDUxxx64xxxxxxx-ssR TSOP DDR1-UDIMM ECC 400 / CL3 512 MB - 1 GB x72 1.25" (31.75 mm) 2.50 V 184 SDUxxx72xxxxxxx-ssR TSOP SODIMM /WITH AND WITHOUT ECC/RUGGED XR-DIMM Data Rate / CL Density Org Height Voltage Pins Partnumber DDR4-SODIMM 2133 / CL15 4 GB - 16 GB x64 30 mm 1.20 V 260 SHNxxx64xxxxxxx-ssRT Package BGA DDR4-SODIMM ECC 2133 / CL15 4 GB - 16 GB x72 30 mm 1.20 V 260 SHNxxx72xxxxxxx-ssRT BGA DDR3L-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18" (29.97 mm) 1.35 / 1.50 V 204 SLNxxx64xxxxxxx-ssRT BGA DDR3L-SO-UDIMM 1600 / CL11 2 GB - 8 GB x72 1.18" (29.97 mm) 1.35 / 1.50 V 204 SLNxxx72xxxxxxx-ssRT BGA DDR3-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18" (29.97 mm) 1.50 V 204 SGNxxx64xxxxxxx-ssRT BGA DDR3-SO-UDIMM 1600 / CL11 1 GB - 8 GB x72 1.18" (29.97 mm) 1.50 V 204 SGNxxx72xxxxxxx-ssRT BGA DDR3-XR-DIMMTM 1600 / CL11 1 GB - 8 GB x72 38 mm x 67.5 mm 1.35 / 1.50 V 240 SLVxxx72xxxxxxx-ssRT BGA DDR2-SODIMM 800 / CL6 512 MB - 4 GB x64 1.18" (29.97 mm) 1.80 V 200 SENxxx64xxxxxxx-ssR BGA DDR1-SODIMM 400 / CL3 256 MB - 1 GB x64 1.25" (31.75 mm) 2.50 V 200 SDNxxx64xxxxxxx-ssR BGA MINI-UDIMM / 100PIN-DIMM Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3-MiniUDIMM 1600 / CL11 2 GB - 8 GB x72 1.18" / 0.74" 1.50 V 244 SGLxxx72xxxxxxx-ssRT BGA DDR1-100PIN_DIMM 333 / CL2.5 128 MB - 512 MB x72 1.00" (25.40 mm) 2.50 V 100 SDUxxx32xxxxxxx-ssR TSOP MEMORY SOLUTIONS 33 MODULE OPTIONS HEAT SPREADER CONFORMAL COATING The critical condition for DRAMs is a high die temperature, because it leads to loss of cell information. With die sizes continually shrinking, power dissipation is concentrated on only a few square millimeters. Adding a heat spreader to a module allows the hot spots to more easily dissipate the heat over a bigger surface. This heat spreader levels out the module's heat dissipation, thus reducing the hot-spot temperature and improving the module's reliability. Swissbit offers heat-spreader solutions for some of its industrial temperature grade SODIMMs and MiniDIMMs. Industrial DRAM modules often do not operate in a clean air environment relative to standard office or home conditions. A heavy-industry environment with hot or humid air, aggressive chloride of sulfite loaded gas or dust can reduce the life span of a DRAM module by corroding the PCB lines or solder contacts. Swissbit offers a full module surface coating with a thin film of polyurethane, which effectively protects against most hazardous environmental conditions. The module's endurance is greatly improved with this protection, thus reducing maintenance periods and avoiding sudden breakdown of a system. This option is currently available for SODIMMs as well as for several Flash products. CORROSION RESISTANCE For demanding applications Swissbit uses a thick, 30 microinch layer of gold on the DIMM contacts and special sulfur corrosion resistant passives to offer the highest reliability and longest lifetime. TEMPERATURE SENSOR Unprotected PCB after highly accelerated corrosion test For all DDR3 SODIMMs, MiniDIMMs, and registered DIMMs, Swissbit offers an integrated temperature sensor by default within the SPD device. It allows permanent monitoring of the module temperature over the system management bus. By utilizing this feature, system management can actually control the module's self-heating in a more accurate manner than by using calculation methods for memory throttling. This results in greater useable bandwidth and avoids overheating of the module. Industrial Temperature Range Swissbit protected PCB after highly accelerated corrosion test 34 MEMORY SOLUTIONS Besides modules for commercial temperature range 0C to +70C, Swissbit also offers products for an extended temperature range of 0C to +85C T AMBIENT as well as the full industrial temperature range -40C to +85C T AMBIENT. With intensive application testing of each individual module at low and high temperature, Swissbit ensures the highest quality and reliability of their products. Registered DIMM products Long RDIMM / standard height / with ECC and C/A Parity DDR3L-RDIMM ECC+Parity DDR3-RDIMM ECC+Parity DDR2-RDIMM ECC+Parity Data Rate / CL Density Org Height Voltage Pins Partnumber Package 1600 / CL11 4 GB - 8 GB x72 1.18" (29.97 mm) 1.35 V 240 SLPxxx72xxxxxx-ssR BGA 1333 / CL9 1 GB - 8 GB x72 1.18" (29.97 mm) 1.50 V 240 SGPxxx72xxxxxx-ssR BGA 800 / CL6 1 GB - 4 GB x72 1.18" (29.97 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA Low Profile Long RDIMM, UDIMM / with ECC DDR3-RDIMM ECC+Parity DDR3L-UDIMM ECC DDR3-UDIMM ECC DDR2-RDIMM ECC+Parity Data Rate / CL Density Org Height Voltage Pins Partnumber Package 1333 / CL9 2 GB - 8 GB x72 0.70" (17.78 mm) 1.50 V 240 SGPxxx72xxxxxxx-ssR BGA 1600 / CL11 2 GB - 8 GB x72 0.74" (18.90 mm) 1.35 V 240 SLUxxx72xxxxxxx-ssR BGA 1333 / CL9 2 GB - 4 GB x72 0.70" (17.78 mm) 1.50 V 240 SGUxxx72xxxxxxx-ssR BGA 800 / CL6 1 GB - 2 GB x72 0.72" (18.29 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA VLP MiniRDIMM with ECC, Registered SO-RDIMM with ECC Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3-MiniRDIMM 1333 / CL9 2 GB - 4 GB x72 0.72" (18.29 mm) 1.50 V 244 SGHxxx72xxxxxxx-ssR BGA DDR2-MiniRDIMM 667 / CL5 1 GB x72 0.72" (18.29 mm) 1.80 V 244 SEHxxx72xxxxxxx-ssR BGA DDR2-SO-RDIMM 667 / CL5 1 GB - 2 GB x72 1.18" (29.97 mm) 1.80 V 200 SEGxxx72xxxxxxx-ssR BGA MEMORY SOLUTIONS 35 SYSTEM-IN-PACKAGE (SiP) System-in-Package (SiP) is the processing of sensitive bare dies or chips into robust finished modules or components. With 20 years of experience, Swissbit successfully uses advanced packaging technologies to achieve the smallest form factors and to build multi-chip-packages. With this electronic integration approach, our products provide more functionality or highest memory densities inside one package, various functional blocks (RF, digital, sensors, security, and memory) as well as passive components are combined. Beginning with the wafer and bare die handling, Swissbit utilizes a flexible chip-on-board (COB) assembly and packaging line. Processes like SMT assembly, die bonding, Au and Al wire bonding, dam&fill, transfer molding, precise separation with laser technology and sawing, housing, labeling, laser marking, etc. are very well established. Die stacking, especially for Flash and DRAM, is one of our expertises besides the integration of additional hardware features and an experienced team of testing and quality engineers. Our own Memory-In-Package line qualifies (but does not limit) Swissbit as the development and production partner for any dedicated or customized memory-related product with challenging integration or reliability requirements. If you cannot satisfy the special demands regarding space and performance using traditional components and processes, Swissbit offers feasibility studies, manages or supports your development project, and produces prototypes and small and mid-size volumes (up to 50,000 pieces/ month). We will aid you beginning at your project's conception: from the design phase, prototyping, determining the circuit layout, and material selection to preparing the appropriate packaging for transport. Swissbit produces and develops according to ISO 9001:2008, TS 16949, and ISO 14001 approved processes and is an experienced partner in global industrial and automotive accounts. Swissbits technology portfolio combined with its strong engineering knowhow and experience enables new, innovative MCP (Multi Chip Packages)/SiP/ COB configurations like stacked dies, side-by-side, sensors integration, etc. System-in-Package solutions could be smaller, cheaper, and having tighter security. System-in-Package benefits: * Reduced process complexity * Lower TCO (total cost of ownership) * Reduced system board space due to smaller sized solutions than individually packaged ICs * Layer count reduction in System PCB * Reduced board mounted height * Mixed analog / digital design * Reduced system board test complexity 36 SWISSBIT SiP and COB COMPETENCY CONCEPTION * * * * * * Product definition Feasibility studies Verification plan Qualification plan Design for test Design for production * Design to cost VERIFICATION & DEVELOPMENT * Package development * Process development * Substrate layout * Test engineering and development * Failure analysis consulting Production Qualification * * * * * * Product verification Debugging Optimization Reliability testing Life time Compliance to CE / FCC / VCCI, UL, RoHS, and REACH * * * * Fast prototyping Ramp up Yield management Series production of: *SMT * SiP *COB *MCP *BGA Logistics * Stock management * Supply chain management * One-stop sourcing Swissbit is offering the following production technologies SMD SEPARATION / SINGULATION Die Attach /Chip Bonding/ Wire Bonding DIE STACKING ENCAPSULATION ADHESIVE APPLY MARKING Conformal Coating System in Package (SiP) 37 Swissbit Part Number - The DNA of your specific product Flash and Security Part Number Decoder S 1 F 2 CF 3 2048 4 H 5 4 6 B 7 o 8 2 9 TO - I - M 10 11 12 S 13 - * 14 - * 15 Swissbit Memory (1) Design Option (15) Configuration (14) Memory Type (2) F: Flash Products PIN Mode (13) 0: 1 nCE & R/nB Product Type (3) 1: 2 nCE & R/nB U2: USB 2.0 Flash Drive 2: 4 nCE & R/nB CA: CFastTM A: LGA 1 nCE & R/nB CF: CompactFlashTM B: LGA 2 nCE & R/nB PC: PCIe C: LGA 4 nCE & R/nB UI: UFD internal / Module E: COB 1 nCE SD: SD memory card F: COB 2 nCE MM: Multimedia card G: COB 4 nCE & R/nB PA: PATA / IDE H: COB 8 nCE & R/nB SA: SATA O: 2 TSOP, single channel, 1 nCE & R/nB P: 2 TSOP, single channel, 2 nCE & R/nB Density (4) Q: 2 TSOP, single channel, 4 nCE & R/nB 0016: 16 MB 4096: 4 GB 030G: 30 GB S: TSOP 1 nCE & R/nB 0032: 32 MB 8192: 8 GB 060G: 60 GB T: TSOP 2 nCE & R/nB 0064: 64 MB 016G: 16 GB 120G: 120 GB U: TSOP 4 nCE & R/nB 0128: 128 MB 032G: 32 GB 240G: 240 GB 0256: 256 MB 064G: 64 GB 480G: 480 GB 960G: 960 GB Flash Package Classification (12) 0512: 512 MB 128G: 128 GB 1024: 1 GB 256G: 256 GB D: SLC DDP (dual die package) 2048: 2 GB 512G: 512 GB Q: SLC QDP (quad die package) Product Dimension (5) M: SLC SDP (single die package) N: SLC ODP (octal die package) G: MLC SDP (single die package) H: CompactFlashTM / CFastTM L: MLC DDP (dual die package) J: UFD Module 2.54 mm terminal header H: MLC QDP (quad die package) K: UFD Module 2.00 mm terminal header O: MLC ODP (octal die package) L: SD memory card M: M.2 SSD Temperature Rating (11) N: microSD memory card I: Industrial Temp. (-40C to +85C) O: Multimedia card E: Extended Temp. (-25C to +85 / 90C) Q: SSD 2.5" C: Commercial Temp. (0C to +70C) U: mSATA (MO-300) V: SLIM SATA (MO-297) Product Generation (6) Memory Organization (7) Flash Supplier (10 ) SA: Samsung MT: Micron Technology HY: SK Hynix TO: Toshiba MA: Macronix Technology (8) AP: Spansion Chips / Channels (9) 38 Part Numbers DRAM Part Number Decoder S 1 Swissbit l N 08G 64 E2 B d 2 2 3 4 5 6 7 8 9 SA - DC 10 11 * 12 R T 13 14 Memory (1) Product Group (2) S: SDRAM SDR 3.30 V D: SDRAM DDR 2.50 V E: SDRAM DDR2 1.80 V G: SDRAM DDR3 1.50 V L: SDRAM DDR3L 1.35 / 1.50 V H: SDRAM DDR4 1.20 V Thermal Sensor (14) Material (13) R: RoHS conform S: RoHS conform, Sulfur resistant Temperature Rating (12) Module Type (3) SDR N: 144 Pin SODIMM DDR U: 184 Pin UDIMM C: (or blank) (0C to +70C) E: Ext. Temp. (0C to +85C) I: R: 184 Pin RDIMM Ext. Temp. (-25C to +85C) W: Ind. Temp. (-40C to +85C) N: 200 Pin SODIMM Speed (11) M: 172 Pin Micro-DIMM DDR2 U: 240 Pin UDIMM DDR4 DK: DDR4-1600 CL11 EM: DDR4-1866 CL13 FP: DDR4-2133 CL15 GU: DDR4-2400 CL18 R: 240 Pin RDIMM, w/o Parity P: 240 Pin RDIMM, w/ Parity DDR3 AA: DDR3-800 CL5 F: 240 Pin FBDIMM N: 200 Pin SODIMM CC: DDR3-1333 CL9 37: DDR2-533 CL4 30: DDR2-667 CL5 3A: DDR2-667 CL4 25: DDR2-800 CL6 2A: DDR2-800 CL5 H: 244 Pin MiniRDIMM, w/ Parity M: 214 Pin MicroDIMM DDR3L P: 240 Pin RDIMM BB: DDR2-1066 CL7 DDR N: 204 Pin SODIMM / SOUDIMM G: 204 Pin SO-RDIMM M: 214 Pin MicroDIMM L: 244 Pin MiniUDIMM H: 244 Pin MiniRDIMM SDR 08: DDR-200 CL2 75: DDR-266B CL2.5 70: DDR-266A CL2 7A: DDR-266A CL2 60: DDR-333B CL2.5 6A: DDR-333A CL2 50: DDR-400B CL3 5A: DDR-400A CL2.5 10: PC-100 CL3 08: PC-100 CL2 75: PC-133 CL3 70: PC-133 CL2 V: 240 Pin XR-DIMM DDR4 U: 288 Pin UDIMM P: 288 Pin RDIMM N: 260 Pin SODIMM x64, x72 Address Depth / Capacity (4) 008: DC: DDR3-1600 CL11 DDR2 50: DDR2-400 CL3 G: 200 Pin SO-RDIMM DDR3 U: 240 Pin UDIMM BB: DDR3-1066 CL7 DRAM Manufacturer (10 ) EP: Elpida ET: Etron HY: SK Hynix MT: Micron Technology NA: Nanya PT: Promos SA: Samsung WI: Winbond 8 MB x (5) 01G: 1 GB 016: 16 MB x (5) 02G: 2 GB 032: 32 MB x (5) 04G: 4 GB 1: 1 Rank Module 064: 64 MB x (5) 08G: 8 GB 2: 2 Rank Module 128: 128 MB x (5) 16G: 16 GB 4: 4 Rank Module Module Ranks (9) 256: 256 MB x (5) DRAM Revision (8) Data Width (5) 32: w/o Parity DRAM Organization (7) 36: w/ Parity A: x4 64: w/o ECC C: x16 D: x4 TSOP Stack 72: w/ ECC G: x4 BGA DDP H: x8 BGA DDP B: x8 Printed Circuit Board with Revision (6) Part Numbers 39 Swissbit NA Port Chester, NY HQ SBNA + Sales 18 Willett Ave #202, Port Chester, NY 10573, USA sales@swissbitna.com Swissbit NA Orange County, CA FAE support 29222 Rancho Viejo Rd, San Juan Capistrano, CA 92675, USA sales@swissbitna.com Swissbit NA Eagle, ID FAE support + Sales 1117 E Plaza Dr, Eagle, ID 83616, USA sales@swissbitna.com 40 Swissbit Security R&D, FAE support, Sales Kirchenstrae 62, 81675 Munich, Germany security@swissbit.com Swissbit AG Headquarters, R&D, FAE support, Sales Industriestrae 4, 9552 Bronschhofen, Switzerland industrial@swissbit.com Swissbit Germany Design Center Dresden, Germany industrial@swissbit.com Swissbit NA Westford, MA R&D + FAE support 238 Littleton Rd #202b, Westford, MA 01886, USA sales@swissbitna.com Swissbit Germany R&D + Production Wolfener Strae 36, 12681 Berlin, Germany industrial@swissbit.com Swissbit Taiwan R&D, FAE support, Sales 2F., No. 125, Shengli 2nd Rd, Zhubel City, Hsinchu County 302, Taiwan (R.O.C.) salesasia@swissbit.com Swissbit Japan FAE support + Sales 2-1-24 Koenji-Kita, Suginami-Ku Tokyo 166-0002, Japan industrial@swissbit.co.jp Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Swissbit: SFSA120GQ1BJ8TO-I-LB-226-STD SFSA256GQ1BJATO-I-NU-236-STD SFSA032GQ1BJATO-I-DT-236-STD SFSA060GQ1BJ4TO-I-LB-226-STD SFSA240GQ1BJ4TO-I-OC-226-STD SFSA480GQ1BJ8TO-I-OC-226-STD SFSA030GQ1BJ2TO-I-LB-226-STD SFSA064GQ1BJATO-I-QT-236-STD SFSA016GQ1BJ8TO-I-DT-236-STD SFSA128GQ1BJ8TO-I-NU-236-STD