GLS85VM1008A-M-I-LFWE-ND202 - Greenliant

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

Features

• Industry Standard Embedded MultiMediaCard

(eMMC) Host Interface

- JEDEC/MMC Standard Version 4.4

JESD84-A44 compliant

- Backward compatible with eMMC 4.3

• Performance

- eMMC clock speed: Up to 52MHz (Support

x1/x4/x8 bus and Dual Data Rate mode)

- Sequential data read:

Up to 60 MByte/sec *

- Sequential data write:

Up to 30 MByte/sec *

* measured using 128 Kbyte transfer size

• Power Management

- 3.3V power supply

- 3.3V or 1.8V eMMC IO voltage

- Immediate disabling of unused circuitry without

Host intervention

• Power Specifications

- Active mode

180mA typical (GLS85VM1032A)

150mA typical (GLS85VM1016A)

120mA typical (GLS85VM1008A)

120mA typical (GLS85VM1004A)

- Sleep mode

200µA typical

• Expanded Data Protection

- Hardware Write Protection pin

• Latency Management

- Reduce latencies due to background operation

during time critical read/write operations

• Integrated Voltage Detector

- Detects supply voltage fluctuations and

generates reset during power-up and power-

down to prevent inadvertent writes

• Robust Built-in ECC

• NAND Configuration

- 2 bits per cell (MLC)

• Temperature Range

- Industrial: -40°C to 85°C

• 100-ball LBGA Package

- 14.0 mm x 18.0 mm x 1.40 mm, 100-ball,

1.0 mm ball pitch, LFWE

(GLS85VM1004A/8A/16A/32A)

• All Devices are RoHS Compliant

Product Description

The GLS85VM1004A / 1008A / VM1016A / VM1032A

eMMC NANDrive™ devices (referred to as “eMMC

NANDrive” in this datasheet) are fully integrated solid

state drives. They combine an advanced Greenliant

NAND controller and 4, 8, 16 or 32 GByte of NAND

flash memory in a multi-chip package. These products

are ideal for solid state mass storage in embedded

and portable applications that require small form-

factor, energy efficient and reliable data storage.

eMMC solid state drives are widely used in GPS and

telematics, in-vehicle infotainment, portable and

industrial computers, handheld data collection

scanners, point-of-sale terminals, networking and

telecommunications equipment, robotics, audio and

video recorders, monitoring devices and set-top boxes.

eMMC NANDrive provides complete eMMC solid state

drive (SSD) functionality and compatibility in a 14mm

x 18mm BGA package for easy, space saving

mounting to a system motherboard. With its small size,

low power consumption, strong security, reliability and

ruggedness, eMMC NANDrive surpasses removable

storage and discrete NAND-based products.

The integrated NAND flash controller with built-in

advanced NAND management firmware

communicates with the Host through the standard

eMMC protocol. It does not require any additional or

proprietary software such as the Flash File System

(FFS) and Memory Technology Driver (MTD).

eMMC NANDrive’s advanced NAND management

technology enhances data security, improves

endurance and accurately tracks the usage of the

NAND flash. This innovative technology combines

robust error correction capabilities with advanced

wear-leveling algorithms and bad block management

to extend the life of the product.

eMMC NANDrive supports Dual Data Rate (DDR)

mode, boot, multiple partitions, permanent and partial

write protect, Replay Protected Memory Block (RPMB)

access, Secure erase and TRIM, hardware reset and

other features detailed in the eMMC 4.4 standard

specification. It is fully backward compatible with the

eMMC 4.3 standard.

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

1.0 GENERAL DESCRIPTION

Each eMMC NANDrive contains an integrated eMMC NAND flash memory controller and NAND flash die in a

BGA package. Refer to Figure 2-1 for the eMMC NANDrive block diagram.

1.1 Optimized eMMC NANDrive

The heart of the eMMC NANDrive is the eMMC NAND

flash memory controller, which translates standard

eMMC signals into flash media data and control

signals. The following components contribute to the

eMMC NANDrive’s operation.

1.1.1 Microcontroller Unit (MCU)

The MCU transfers the eMMC commands into data

and control signals required for flash media operation.

1.1.2 Internal Direct Memory Access (DMA)

The eMMC NANDrive uses internal DMA allowing

instant data transfer from/to buffer to/from flash media.

This implementation eliminates microcontroller

overhead associated with the traditional, firmware-

based approach, thereby increasing the data transfer

rate.

1.1.3 Power Management Unit (PMU)

The PMU controls the power consumption of the

eMMC NANDrive. The PMU dramatically reduces the

power consumption of the eMMC NANDrive by putting

the part of the circuitry that is not in operation into

sleep mode.

The Flash File System handles inadvertent power

interrupts and has auto-recovery capability to ensure

the eMMC NANDrive’s data integrity.

1.1.4 Embedded Flash File System

The embedded flash file system is an integral part of

the eMMC NANDrive. It contains MCU firmware that

performs the following tasks:

1. Translates host side signals into flash media

writes and reads

2. Provides flash media wear leveling to spread

flash writes across all memory address space to

increase the longevity of flash media

3. Keeps track of the data file structure

4. Manages system security for the selected

protection zones

1.1.5 Error Correction Code (ECC)

High performance is achieved through optimized

hardware error detection and correction.

1.1.6 Serial Communication Interface (SCI)

The Serial Communication Interface (SCI) is designed

for error reporting. During the product development

stage, it is recommended to provide the SCI port on

the PCB to aid in design validation.

1.1.7 Multi-tasking Interface

The multi-tasking interface enables fast, sequential

write performance by allowing concurrent Read,

Program and Erase operations to multiple flash media.

1.2 SMT Reflow Consideration

The eMMC NANDrive family utilizes standard NAND

flash for data storage. Because the high temperature

in a surface-mount soldering reflow process may alter

the content on NAND flash, it is recommended to

program the eMMC NANDrive after the reflow process.

1.3 Advanced NAND Management

The eMMC NANDrive’s integrated controller uses

advanced wear-leveling algorithms to substantially

increase the longevity of NAND flash media. Wear

caused by data writes is evenly distributed in all or

select blocks in the device that prevents “hot spots” in

locations that are programmed and erased extensively.

This effective wear-leveling technique results in

optimized device endurance, enhanced data retention

and higher reliability required by long-life applications.

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

2.0 FUNCTIONAL BLOCKS

Figure 2-1: eMMC NANDrive Block Diagram

Flash Media I/F

NAND I/F

NAND

Chips

NAND

Chips

NAND

Chips

MCU

eMMC

I/F

Internal

DMA

SCI

PMU

Memory

Channel

NAND Controller

ECC

SRAM Buffer

HOST I/F

NAND

Chips

NAND

Flash

eMMC NANDrive

eMMC

I/F

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

3.0 PRODUCT ORDERING INFORMATION

GLS 85 VM 1 0xx A - M - I - LFWE - NDxxx

XX XX X XXX X - X - X -

XX

XX -

XXX

XX

Ordering Code

1)

NDxxx = NANDrive Revision

EDxxx = Evaluation Board Revision

Environmental Attribute

E = non-Pb solder (RoHS Compliant)

Package Modifier

W = 100-ball positions

Package Type

LF = LBGA (max. package height 1.40mm)

Operation Temperature

I = Industrial: -40°C to +85°C

NAND Configuration

M = 2 bits per cell

Generation / Product Configuration

A = First generation

Capacity

004 = 4 GByte

008 = 8 GByte

016 = 16 GByte

032 = 32 GByte

MByte or GByte Designator

0 = MByte

1 = GByte

Interface

M = eMMC

Voltage

V = 2.7V to 3.3V

Product Series

85 = NANDrive

1)

Note that the top side marking on the package typically does not include ordering codes (e.g. NDxxx), unless it is a

special C-SPEC (custom specification) which is required by the end-customer to be marked on the device.

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

Valid Combinations

Valid product combinations are those that are in the mass production or will be in the mass production. Consult

your Greenliant sales representative to confirm availability of the valid combinations and to determine availability

of new product combinations.

Table 3-1: eMMC NANDrive Product Valid Ordering Numbers

Capacity

Operating Temperature

Part Num

ber

Package

4GB Industrial (-40°C to 85°C) GLS85VM1004A-M-I-LFWE-ND206 LFWE, 14x18x1.40mm

4GB Industrial (-40°C to 85°C) GLS85VM1004A-M-I-LFWE-ND209 LFWE, 14x18x1.40mm

8GB Industrial (-40°C to 85°C) GLS85VM1008A-M-I-LFWE-ND206 LFWE, 14x18x1.40mm

8GB Industrial (-40°C to 85°C) GLS85VM1008A-M-I-LFWE-ND209 LFWE, 14x18x1.40mm

16GB Industrial (-40°C to 85°C) GLS85VM1016A-M-I-LFWE-ND206 LFWE, 14x18x1.40mm

16GB Industrial (-40°C to 85°C) GLS85VM1016A-M-I-LFWE-ND209 LFWE, 14x18x1.40mm

32GB Industrial (-40°C to 85°C) GLS85VM1032A-M-I-LFWE-ND206 LFWE, 14x18x1.40mm

32GB Industrial (-40°C to 85°C) GLS85VM1032A-M-I-LFWE-ND209 LFWE, 14x18x1.40mm

Table 3-2: eMMC Evaluation Board Valid Ordering Numbers

Capacity

Operating Temperature

Part Number

Form Factor

4GB Industrial (-40°C to 85°C) GLS85VM1004A-M-I-E2-ED209 JEDEC MO-277

8GB Industrial (-40°C to 85°C) GLS85VM1008A-M-I-E2-ED209 JEDEC MO-277

16GB Industrial (-40°C to 85°C) GLS85VM1016A-M-I-E2-ED209 JEDEC MO-277

32GB Industrial (-40°C to 85°C) GLS85VM1032A-M-I-E2-ED209 JEDEC MO-277

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

3.1 Package Diagram

Note: All linear dimensions are in millimeters.

Untoleranced dimensions are nominal target values.

Coplanarity: 0.12 mm

Ball diameter is 0.45 mm (± 0.05 mm)

Ball opening size is 0.38 mm (± 0.05 mm), SMD type

Figure 3-1: eMMC NANDrive 100-Ball, Ball Grid Array (BGA) Greenliant Package Code: LFWE

Fact Sheet 03.000

June 2016

These specifications are subject to change without notice. 06/15/2016

GLS85VM1004A / 1008A / 1016A / 1032A

Industrial Temp eMMC NANDrive™

Revision History

Number

Descriptio

n

Date

01.000 Initial release as Fact Sheet March 22, 2013

02.000 Added GLS85VM1004A-M-I-LFWE August 26, 2013

03.000 Added Ordering Codes ND206/ND209/ED209, Removed ND202 June 15, 2016

Greenliant and the Greenliant logo are registered trademarks, and NANDrive is a trademark of Greenliant

Systems. All other trademarks and registered trademarks are the property of their respective owners.

Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable

capacity may be less.

Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant

Terms and Conditions of Sale.

www.greenliant.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Greenliant:

GLS85VM1016A-M-I-E1-ED202 GLS85VM1008A-M-I-LFWE-ND202 GLS85VM1008A-M-I-E1-ED202

GLS85VM1032A-M-I-LFWE-ND202 GLS85VM1004A-M-I-E2-ED202 GLS85VM1016A-M-I-LFWE-ND202

GLS85VM1004A-M-I-LFWE-ND202 GLS85VM1008A-M-I-E2-ED202 GLS85VM1016A-M-I-E2-ED202

GLS85VM1032A-M-I-LFWE-ND209 GLS85VM1004A-M-I-LFWE-ND209 GLS85VM1008A-M-I-LFWE-ND209

GLS85VM1016A-M-I-LFWE-ND209