Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Description The A1612A/B 1310 nm forward-path DFB laser modules are designed for both broadcast and narrowcast analog applications. The highly linear, OC-48 pinout-compatible devices feature up to 31 mW output power with superior distortion performance over an enhanced operating temperature range of -40 C to + 85 C. With 31 mW of output power, the A1612A/B module enables transmission beyond 40 km, and a greater number of optical splits. In addition, the wide operating temperature range increases the laser's reliability even in the harshest environments. Features OC-48 pinout compatible Negative bias 112 channel loading Meets Telcordia Technologies * 468 specifications High output power, up to 31 mW Applications 1310 nm forward path: -- Long distances -- High-count optical splits Broadcast and narrowcast networks * Telcordia Technologies is a trademark of Telcordia Technologies, Inc. Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Condition Min Max Unit TC Tstg -- VR VRPD ITEC IF = IOP -- -- -- -- -40 C < TC < 85 C, TOP = 25 C, IF = 100 mA -40 -40 -- -- -- -- 85 85 150 2 10 1.9 C C mA V V A Operating Case Temperature Range Storage Temperature Range Laser Forward dc Current Reverse dc Voltage (Laser) Reverse Voltage Photodiode TEC Current Electrical/Optical Characteristics Table 1. Electrical and Optical Characteristics Parameter Symbol Condition Min Typ Max Unit Wavelength OP IF = IOP, T = TOP -- 1310 10 -- nm Optical Output Power PO IF = IOP 4 -- 31 mW Optical Isolation Side Mode Suppression Ratio Threshold Current Operating Current Monitor PD Current ISO SMSR ITH IOP IPD 30 30 -- -- 10 -- -- -- -- -- -- -- 30 120 200 dB dB mA mA A/mW Thermistor Resistance Thermistor Temperature Coefficient TEC Current RTH TCTH ITEC TOP = 25 C IF = IOP 25 C, BOL BOL VRM = 5 V, TOP = 25 C TOP = 25 C TOP = 25 C -40 C < TC < 85 C, TOP = 25 C, IF = 100 mA -- -- -- 10 0.5 @ 25 C -4.4 @ 25 C -- -- -- 1.6 k %/C A Table 2. RF Characteristics Parameter Symbol Condition Min Typ Max Unit Frequency Range Frequency Response F |S21| 40 -- -- 0.5 860 -- MHz dB Carrier-to-Noise Ratio* Composite Second Order: 1612A 1612B Composite Triple Beat Relative Intensity Noise CNR CSO -- IF = 60 mA, 40 MHz--860 MHz, TOP = 25 C -- -- -- 51 -- dB -- -- 57 60 67 < -155 -- -- -- -- dB dB dB dB/Hz CTB RIN -- -- -- * OMI = 3.2% min, 112 unmodulated NTSC channels. 2 Lucent Technologies Inc. Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Electrical Schematics 1 14 ISOLATOR NC 2 13 (+) 3 12 (-) (-) 4 11 (+) (+) 5 10 NC (+) 6 (-) 7 TEC CASE GROUND 9 CASE GROUND 8 1-1233F Figure 1. A1612A/B Laser Schematic 14 13 SEE FIGURES 3A AND 3B 12 11 1 NC THERMISTOR LASER COMMON (+) THERMISTOR 2 LASER MODULATION (-) LASER COMMON (+) dc LASER BIAS 3 MPD ANODE CASE GROUND 4 10 8 0.01 f 200 3.3 H 1000 pf 5 NC 9 39 nH SEE FIGURE 4 MPC CATHODE 1000 pf 6 CASE GROUND TEC (+) CASE GROUND TEC (-) 0.01 f 7 0.01 f 1-1234(F) Figure 2. A1611A/B Circuit Schematic Lucent Technologies Inc. 3 Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Electrical Schematics (continued) 0.01 f C7 R1 37.5 SEE PIN 12, FIGURE 2 3:5 T1* 2 3 SEE PIN 12, FIGURE 2 R2 37.5 0.5 pF--2.5 pF 1-1238F.b VSWR 1 pF-- 5 pF 0.01 f 0.01 f Figure 3b. Resistive-Matched Configuration FREQUENCY RESPONSE *T1 (75 ) 3:5. 1-1238F.a Figure 3a. Impedance-Matched Configuration TEC CONSTANT ALARM 1 THERMISTOR J1 2 THERMISTOR 0.01 f 39 nH dc LASER BIAS 3 MPD ANODE CASE GROUND 4 3.3 H 200 1000 pf 5 MPC CATHODE 1000 pf 1 THERMISTOR 2 THERMISTOR 3 dc LASER BIAS 4 MPD ANODE (CASE GROUND) 5 MPC CATHODE 6 TEC (+) 7 TEC (-) 8 GND 9 GND 10 GND 6 TEC (+) 0.01 f 7 TEC (-) 0.01 f 1-1238F.c Note: When ordering the dc set, the following boards are included: alarm board, 9108-004; TEC board, 9028-004; constant current, 9383-004. Figure 4. dc Set (Lucent Supplied) 4 Lucent Technologies Inc. Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Outline Diagram Dimensions are in inches and (millimeters). PIN 1 LEADS 0.030 (0.8) WIDE x 0.008 (0.2) THICK 0.400 (10.2) MINIMUM LENGTH 6 SPCS @ 0.100 (2.5) LOCATION FOR LABEL INCLUDING SERIAL NUMBER AND DATE CODE (LABEL NOT SHOWN) 0.213 (5.4) 0.049 (1.2) 0.500 (12.7) 0.250 (6.4) 0.350 (8.9) 0.190 0.03 (5.0 0.8) 4 x o 0.105 (2.7) 0.078 (2.0) 0.820 (20.8) 1.025 (26.0) 1.180 (30.0) 0.700 0.03 (18.0 0.8) 0.365 (9.3) 0.215 0.01 (5.5 0.25) 0.248 (6.3) 0.040 (1.0) 1-1179.(F) (F) Pin Information Table 3. Pin Descriptions Pin No. Description 1 Thermistor 2 3 4 5 6 7 8 9 10 11 12 13 14 Thermistor dc Laser Bias (-) MPD Anode, Case Ground MPD Cathode Thermoelectric Cooler (+) Thermoelectric Cooler (-) Case Ground Case Ground NC Laser Common (+) Laser Modulation (-) Laser Common (+) NC Lucent Technologies Inc. 5 Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Laser Safety Information Class IIIb Laser Product FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser Safety requirements. All versions are Class 3B laser products per IEC * 60825-1:1993. The device has been classified with the FDA under an accession number to be determined. This product complies with 21 CFR 1040.10 and 1040.11. Single-mode fiber pigtail Wavelength = 1.3 m Maximum power = 50 mW Because of size constraints, laser safety labeling (including an FDA Class IIIb label) is not affixed to the module but attached to the outside of the shipping carton. Product is not shipped with power supply. Caution: Use of controls, adjustments, and procedures other than those specified herein may result in hazardous laser radiation exposure. DANGER INVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Avoid direct exposure to beam Do not view beam directly with optical instruments INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR Avoid exposure to beam Class 3B Laser Product IEC-60825M 1993 Max. Output: 50 mW Wavelength: 1.3 m * IEC is a registered trademark of The International Electrotechnical Commission. 6 Lucent Technologies Inc. Data Sheet February 2001 A1612A/B 1310 nm Forward-Path DFB Laser Modules Ordering Information Order Code Definitions Table 4. Ordering Information* A1612 A B R 04 YY Device Code Comcode A1612ACB16 A1612ACB19 A1612ACB22 A1612ACB25 A1612ACB28 A1612ACB31 A1612ACB34 A1612ACR16 A1612ACR19 A1612ACR22 A1612ACR25 A1612ACR28 A1612ACR31 A1612ACR34 108851999 108852005 108852013 108854720 108854738 108854746 108855263 108855271 108855289 108855297 108855305 108855313 108855321 108855339 * For additional ordering information, please contact a Lucent account manager at Microelectronics Group, Optoelectronics Division, OPTO West, 1-800-362-3891 (for sales staff, please press option 2). Field Description Family Name Analog 1310 nm, DFB, High Power, Laser Distortion Performance A = Standard Performance B = Enhanced Performance L = Link Tested P = PAL 60 Tested Frequency Plan A = 60 Channel B = 80 Channel C = 110 Channel N = None (Wireless) Connector R = FC/APC B = SC/APC N = None (No connector) Optical Power 04 = 4 mW 06 = 6 mW 08 = 8 mW 10 = 10 mW 13 = 13 mW 16 = 16 mW 19 = 19 mW 22 = 22 mW 25 = 25 mW 28 = 28 mW 31 = 31 mW Custom 00 01 02 03 04 05 06 Lucent Technologies Inc. 7 A1612A/B 1310 nm Forward-Path DFB Laser Modules Data Sheet February 2001 For additional information, contact your Microelectronics Group Account Manager or the following: INTERNET: http://www.lucent.com/micro, or for Optoelectronics information, http://www.lucent.com/micro/opto E-MAIL: docmaster@micro.lucent.com N. AMERICA: Microelectronics Group, Lucent Technologies Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286 1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106) ASIA PACIFIC: Microelectronics Group, Lucent Technologies Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256 Tel. (65) 778 8833, FAX (65) 777 7495 CHINA: Microelectronics Group, Lucent Technologies (China) Co., Ltd., A-F2, 23/F, Zao Fong Universe Building, 1800 Zhong Shan Xi Road, Shanghai 200233 P. R. China Tel. (86) 21 6440 0468, ext. 325, FAX (86) 21 6440 0652 JAPAN: Microelectronics Group, Lucent Technologies Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700 EUROPE: Data Requests: MICROELECTRONICS GROUP DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148 Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK) Lucent Technologies Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Copyright (c) 2001 Lucent Technologies Inc. All Rights Reserved February 2001 DS00-292OPTO-1 (Replaces DS00-290OPTO)