1/9
XC221A Series
1.2V Input / Output Rail To Rail CMOS Op Amp
PIN
NUMBER SYMBOL FUNCTION
1 VOUT Output Pin
2 VDD Positive Power Supply Pin
3 IN+ Positive Input
4 IN- Negative Input
5 VSS Negative
Power Supply Pin
■PIN CONFIGURATION
■FEATURES
Operating Voltage Range:1.2 ~ 10V (single cell)
:±0.6 ~ 5V (+ve/-ve supply)
Output Signal :0.1~2.9V (3V single cell, RL=2kΩ)
Gain Bandwidth :550kHz (15μA: 210kHz)
Slew Rate :0.5V/μs
High Capacitance Load :CL=200pF
Low Supply Current :100μA, 15μA
Input / Output Rail To Rail Operation
Package :SOT-25
Environmentally Friendly:EU RoHS Compliant, Pb Free
■
A
PPLICATIONS
●Palmtop computers, PDAs
●Cellular and portable phones
●Portable audio systems
●Various battery powered systems
■PIN ASSIGNMENT
■GENERAL DESCRIPTION
The XC221A series is an input / output rail to rail CMOS Op Amp.
With rail to rail functions, operation is guaranteed from power supplies as low as 1.2V. Moreover, since the XC221A series
comes in an ultra small SOT-25 package, the series is particularly suited for use with various types of portable phones.
Bandwidths of 550kHz and slew rates of 0.5V can be achieved eve n with power consumption as low as 100μA.
Even with large capacitance levels of CL = 200pF (unity gain connection), the XC221A series will not be susceptible to
oscillation.
ETR1201_002
2/9
XC221A Series
DESIGNATOR DESCRIPTION SYMBOL DESCRIPTION
① The Number of Channels 1 One channel
1 15μA
② Supply Current 2 100μA
③ Internal Standard Number 0 Fixed
④ Load Capacitance 0 200pF
MR SOT-25
⑤⑥-⑦ Packages
Taping Type (*2) MR-G SOT-25 (Halogen & Antimony free)
PARAMETER SYMBOL RATINGS UNITS
VDD Pin Voltage VDD -0.3 ～ 12.0 V
OUT Pin Voltage VOUT -0.3 ～ 12.0 V
IN Pin Voltage VIN+ -0.3～VDD+0.3 V
IN/ Pin Voltage VIN- -0.3～VDD+0.3 V
OUT Pin Current IOUT ±100 mA
Power Dissipation Pd 150 mW
Operating Temperature Range Topr -30 ～ +80 ℃
S torage Temperature Range Tstg -40 ～ +125 ℃
■
A
BSOLUTE MAXIMUM RATINGS
■PRODUCT CLASSIFICATION
●Ordering Information
Ta = 25℃
,
VSS = 0V
RAIL-TO-RAIL is a trademark of Motorola.
XC221A①②③④⑤⑥-⑦(*1)
(*1) The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
(*2) The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office o
r
representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦)
3/9
XC221A
Series
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Supply Voltage VDD 1.2 - 10.0 V
VDD = 3V 10 15 23 μA
Supply Current IDD VDD = 1.2V 2.5 8 23 μA
Input Offset Voltage VOF - - 20.0 mV
Input Offset Current IOF - 1 - pA
Input Bias Current IB - 1 - pA
Input Resistance RIN - 1 - TΩ
Large Signal Voltage Gain AVD 75 110 - dB
Common Mode
Rejection Ratio CMRR 0≦VCM≦3.0V 60 75 - dB
PSRR+ VDD = 3 to 10V, VSS = 0V, VOUT = 1.5V 60 75 - dB Power Supply
Rejection Ratio PSRR- VSS=-3 to -10V, VDD= 0V, VOUT= -1.5V 60 75 - dB
RL = ∞ 0.05 - VDD-0.05 V
VDD = 1.2V, RL = 47kΩ (to VDD/2) 0.10 - 1.10 V
VDD = 3V, RL = 2kΩ(to VDD/2) 0.10 - 2.90 V
VDD = 5V, RL = 2kΩ(to VDD/2) 0.10 - 4.90 V
Output Voltage Range VOUT
VDD = 10V, RL = 2kΩ(to VDD/2) 0.10 - 9.80 V
Gain Bandwidth FT VDD = 3V - 210 - kHz
Slew Rate SR VDD = 3V - 0.07 - V/μsec
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Supply Voltage VDD 1.2 - 10.0 V
VDD = 3V 67 100 150 μA
Supply Current IDD VDD = 1.2V 16.75 50.00 150.00 μA
Input Offset Voltage VOF - - 20.0 mV
Input Offset Current IOF - 1 - pA
Input Bias Current IB - 1 - pA
Input Resistance RIN - 1 - TΩ
Large Signal Voltage Gain AVD 75 110 - dB
Common Mode
Rejection Ratio CMRR 0≦VCM≦3.0V 60 75 - dB
PSRR+ VDD=3 to 10V, VSS = 0V, VOUT = 1.5V 60 75 - dB
Power Supply Rejection
Ratio PSRR- VSS=-3 to -10V, VDD=0V, VOUT=-1.5V 60 75 - dB
RL = ∞ 0.05 - VDD-0.05 V
VDD = 1.2V, RL = 47kΩ (to VDD/2) 0.10 - 1.10 V
VDD = 3V, RL = 2kΩ(to VDD/2) 0.10 - 2.90 V
VDD = 5V, RL = 2kΩ(to VDD/2) 0.10 - 4.90 V
Output Voltage Range VOUT
VDD = 10V, RL = 2kΩ(to VDD/2) 0.10 - 9.80 V
Gain Bandwidth FT VDD = 3V - 550 - kHz
Slew Rate SR VDD = 3V - 0.50 - V/μsec
■ELECTRICAL CHARACTERISTICS
IDD =100
μ
A Ta = 25℃
XC221A1200
Test Conditions : Unless otherwise stated, VDD = 3.0V, VSS = 0V, VCM = VOUT = VDD / 2, RL = 1MΩ (to VSS), CL = 10pF (to VSS)
Test Conditions : Unless otherwise stated, VDD = 3.0V, VSS = 0V, VCM = VOUT = VDD / 2, RL = 1MΩ (to VSS), CL = 10pF (to VSS)
Ta = 25℃
IDD =15
μ
A
XC221A1100
4/9
XC221A Series
■TYPICAL PERFORMANCE CHARACTERISTICS
●XC221A1100 <15μA>
(1) Voltage Gain vs. Phase Margin
(2) Sink Current vs. Output Voltage (3) Source Current vs. Output Voltage
(4) Supply Current vs. Power Supply Voltage (5) Supply Current vs. Ambient Temperature
Phase margin (゜)
5/9
XC221A
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●XC221A1100 <15μA> (Continued)
(6) Power Supply Rejection Ratio vs. Frequency
(7) Large Signal Input / Output Response (8) Small Signal Input / Output Response
6/9
XC221A Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●XC221A1200 <100μA>
(1) Voltage Gain vs. Phase Margin
(2) Sink Current vs. Output Voltage (3) Source Current vs. Output Voltage
(4) Supply Current vs. Power Supply Voltage (5) Supply Current vs. Ambient Temperature
7/9
XC221A
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
●XC221A1200 <100μA> (Continued)
(8) Small Signal Input / Output Response
(7) Large Signal Input / Output Response
(6) Power Supply Rejection Ratio vs. Frequency
8/9
XC221A Series
MARK PRODUCT SERIES SUPPLY CURRENT
1 XC221A11 15μA
2 XC221A12 100μA
MARK LOAD CAPACITANCE
0 200pF
■PACKAGING INFORMATION
●SOT-25
■MARKING RULE
① represents product series and supp ly current
② based on internal standards
③ represents load capacitance
④ represents the production lot number
0 to 9, A to Z repeated (G, I, J, O, Q, W excluded)
① ② ③ ④
123
54
SOT-25
(
TOP VIEW
)
9/9
XC221A
Series
1. The products and prod uct specifications cont ained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights ari sin g from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the product s listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our re presentatives.
6. We assume no responsibilit y for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
