53
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Lxx04xx & Qxx04xx Series
Description
Main Features
4 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Sensitive type devices guarantee gate control in Quadrants
I & IV needed for digital control circuitry.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Symbol Value Unit
IT(RMS) 4A
VDRM/VRRM 400 to 1000 V
IGT (Q1) 3 to 25 mA
Absolute Maximum Ratings — Sensitive Triacs (4 Quadrants)
Symbol Parameter Value Unit
IT(RMS)
RMS on-state current
(full sine wave)
Lxx04Ly / Lxx04Dy TC = 85°C 4A
Lxx04Ry / Lxx04Vy TC = 75°C
ITSM
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
f = 50 Hz t = 20 ms 33 A
f = 60 Hz t = 16.7 ms 40
I2tI
2t Value for fusing tp = 8.3 ms 6.6 A2s
di/dt Critical rate of rise of on-state current
(IG = 50mA with 0.1s rise time) f = 120 Hz TJ = 110°C 50 A/s
IGTM Peak gate trigger current tp 10 s TJ = 110°C 1. 2 A
PG(AV) Average gate power dissipation TJ = 110°C 0.3 W
Tstg Storage temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 110 °C
Note: xx = voltage, y = sensitivity
Schematic Symbol
MT2 MT1
G
Applications
Typical applications are AC solid-state switches, power
tools, home/brown goods and white goods appliances.
Sensitive gate Triacs can be directly driven by
microprocessor or popular opto-couplers/isolators.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Features & Benefits
t3P)4$PNQMJBOU
t(MBTToQBTTJWBUFE
junctions
t7PMUBHFDBQBCJMJUZVQUP
1000 V
t4VSHFDBQBCJMJUZVQUP
55 A
t&MFDUSJDBMMZJTPMBUFE
“L-Package” is UL
recognized for 2500Vrms
t4PMJETUBUFTXJUDIJOH
eliminates arcing or
contact bounce that
create voltage transients
t/PDPOUBDUTUPXFBSPVU
from reaction of switching
events
t3FTUSJDUFEPSMJNJUFE3'*
generation, depending on
activation point of
sine wave
t3FRVJSFTPOMZBTNBMMHBUF
activation pulse in each
half-cycle
Agency Approval
Agency Agency File Number
®L Package : E71639
54
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants)
Symbol Test Conditions Quadrant Lxx04x3 Lxx04x5 Lxx04x6 Lxx04x8 Unit
IGT VD = 12V RL = 60
*o**o*** MAX. 35510
mA
IV 3 5 10 20
VGT ALL MAX. 1.3 V
VGD VD = VDRM RL = 3.3 k TJ = 110°C ALL MIN. 0.2 V
IHIT = 100mA MAX. 5 10 10 15 mA
dv/dt VD = VDRM Gate Open TJ = 100°C 400V TYP. 25 25 30 35 V/s
600V 15 15 20 25
(dv/dt)c (di/dt)c = 2.16 A/ms TJ = 110°C TYP. 0.5 1 1 1 V/s
tgt IG = 2 x IGT PW = 15s IT = 5.6 A(pk) TYP. 2.8 3.0 3.0 3.2 s
Absolute Maximum Ratings — Standard Triacs
Symbol Parameter Value Unit
IT(RMS)
RMS on-state current
(full sine wave)
Qxx04Ly / Qxx04Dy TC = 95°C 4A
Qxx04Ry / Qxx04Vy TC = 85°C
ITSM
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
f = 50 Hz t = 20 ms 46 A
f = 60 Hz t = 16.7 ms 55
I2tI
2t Value for fusing tp = 8.3 ms 12.5 A2s
di/dt Critical rate of rise of on-state current
(IG = 50mA with 0.1s rise time) f = 120 Hz TJ = 125°C 50 A/s
IGTM Peak gate trigger current tp 10 s;
IGT IGTM
TJ = 125°C 1. 2 A
PG(AV) Average gate power dissipation TJ = 125°C 0.3 W
Tstg Storage temperature range -40 to 150 °C
TJOperating junction temperature range -40 to 125 °C
Note: xx = voltage, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac
Symbol Test Conditions Quadrant Qxx04x3 Qxx04x4 Unit
IGT VD = 12V RL = 60
*o**o*** MAX. 10 25 mA
IV TYP. 25 50
VGT *o**o*** MAX. 1.3 1.3 V
VGD VD = VDRM RL = 3.3 k TJ = 125°C ALL MIN. 0.2 0.2 V
IHIT = 200mA MAX. 20 30 mA
dv/dt VD = VDRM Gate Open TJ = 125°C
400V
MIN.
40 75
V/s
600V 30 50
800V 40
VD = VDRM Gate Open TJ = 100°C 1000V 50
(dv/dt)c (di/dt)c = 2.16 A/ms TJ = 125°C TYP. 2 2 V/s
tgt IG = 2 x IGT PW = 15s IT = 5.6 A(pk) TYP. 2.5 3.0 s
Note: xx = voltage, x = package
55
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Static Characteristics (TJ = 25°C, unless otherwise specified)
Symbol Test Conditions Value Unit
VTM ITM = 5.6A tp = 380 µs MAX. 1.60 V
IDRM
IRRM
VDRM = VRRM MAX.
Lxx04xy TJ = 25°C 400-600V 5 A
TJ = 110°C 400-600V 200 A
Qxx04xy
TJ = 25°C 400-1000V 10 A
TJ = 125°C 400-800V 2 mA
TJ = 100°C 1000V 3
Thermal Resistances
Symbol Parameter Value Unit
R(J-C) Junction to case (AC)
L/Qxx04Dy 3.5
°C/W
L/Qxx04Ly 3.6
L/Qxx04Ry 3.6
L/Qxx04Vy 6.0
R(J-A) Junction to ambient
L/Qxx04Ly 50
°C/W
L/Qxx04Ry 45
L/Qxx04Vy 70
Note: xx = voltage, x = package, y = sensitivity
Figure 2: Normalized DC Gate Trigger Current for
All Quadrants vs. Junction Temperature
Junction Temperature (TJ)- ºC
110 12585603510-40-40-65
4.0
0.0
Ratio of IGT
IGT (TJ = 25°C)
1.0
2.0
3.0
Figure 1: Definition of Quadrants
MT2 POSITIVE
(Positive Half Cycle)
MT2 NEGATIVE
(Negative Half Cycle)
MT1
MT2
+ IGT
REF QII
MT1
IGT
GATE
MT2
REF
MT1
MT2
REF
MT1
MT2
REF
QI
QIV
QIII
ALL POLARITIES ARE REFERENCED TO MT1
(-)
IGT
GATE
(+)
IGT -
IGT
GATE
(-)
IGT
GATE
(+)
+
-
56
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Junction Temperature (TJ)- ºC
Ratio of
IH
IH (TJ = 25°C)
110 12585603510-40-40-65
4.0
0.0
1.0
2.0
3.0
Figure 4: Normalized DC Gate Trigger Voltage for
All Quadrants vs. Junction Temperature
Junction Temperature (TJ)- ºC
Ratio of
VGT
VGT (TJ = 25°C)
110 12585603510-40-40-65
2.0
0.0
0.5
1.0
1.5
RMS On-State Current (IT(RMS)) - Amps
5.04.02.0 3.01. 00.0
0.0
Average On-State
Power Dissipation (PD(AV)) - Watts
2.0
4.0
CURRENT WAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
3.0
1.0
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable Case Temperature
vs. On-State Current
RMS On-State Current (IT(RMS)) - Amps
6345210
Maximum Allowable
Case Temperature (TC) - °C
110
Lxx04Ly
Lxx04Dy
CURRENT WAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawing
70
60
75
80
85
90
95
100
105
65
Lxx04Vyz
Lxx04Ry
LXX04Vy
Figure 8: Maximum Allowable Ambient Temperature
vs. On-State Current
RMS On-State Current [IT(RMS)] - Amps
2.01.0 1. 2 1.4 1.6 1.80.6 0.80.40.20.0
120
100
80
60
40
20
Maximum Allowable
Ambient Temperature (T
A) - °C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
FREE AIR RATING – NO HEATSINK
L/Qxx04Vy
Qxx04Ly
Qxx04Ry
Lxx04Ly
Figure 7: Maximum Allowable Case Temperature
vs. On-State Current
RMS On-State Current (IT(RMS)) - Amps
6345210
Maximum Allowable
Case Temperature (TC) - °C
110
Lxx04Ly
Lxx04Dy
CURRENT WAVE FORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawing
70
60
75
80
85
90
95
100
105
65
Lxx04Vyz
Lxx04Ry
LXX04Vy
Note: xx = voltage, y = sensitivity
57
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Figure 9: On-State Current vs. On-State Voltage (Typical)
Positive or Instantaneous
On-State Voltage (VT) - Volts
1.81.61.41.21.00.80.6
0
Positive or Instantaneous
On-State Current (IT) - Amps
TJ = 25°C
18
20
16
14
12
10
8
6
4
2
1 10 100 1000
10
Surge Current Duration – Full Cycles
1
100
Peak Surge (Non-repetitive) On-State Current
(I
TSM
) – Amps
Qxx04Ry
Qxx04Ly
Qxx04Dy
Qxx04Vy
Lxx04Ry
Lxx04Ly
Lxx04Dy
Lxx04Vy
Figure 10: Surge Peak On-State Current vs. Number of Cycles
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State [IT(RMS)]: Max Rated Value at
Specific Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
Note: xx = voltage, y = sensitivity
58
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Soldering Parameters
Reflow Condition 1Co'SFFBTTFNCMZ
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)oTFDT
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL)oTFDPOET
Peak Temperature (TP)260°C +0/-5
Time within 5°C of actual peak
Temperature (tp)oTFDPOET
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Environmental Specifications
Test Specifications and Conditions
AC Blocking MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
Temperature Cycling
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell time
Temperature/
Humidity
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
High Temp Storage MIL-STD-750, M-1031,
1008 hours; 150°C
Low-Temp Storage 1008 hours; -40°C
Thermal Shock
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell
time at each temperature; 10 sec (max)
transfer time between temperature
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat MIL-STD-750 Method 2031
Solderability ANSI/J-STD-002, category 3, Test A
Lead Bend MIL-STD-750, M-2036 Cond E
Physical Specifications
Terminal Finish 100% Matte Tin-plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Terminal Material Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
reheat
Ramp-up
Ramp-up
Ramp-down
R
amp-
do
59
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G 0.540 0.575 13.72 14.61
H 0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1.14 1.52
R 0.038 0.048 0.97 1.22
K
J
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT
MT2
MT2
O
P
N
M
MT1
.276
7. 0 1
.526
13.36
.320
8.13
GATE
AREA (REF.) 0.17 IN
2
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
Dimension Inches Millimeters
Min Max Min Max
A 0.380 0.420 9.65 10.67
B 0.105 0.115 2.67 2.92
C 0.230 0.250 5.84 6.35
D 0.590 0.620 14.99 15.75
E 0.142 0.147 3.61 3.73
F 0.110 0.130 2.79 3.30
G 0.540 0.575 13.72 14.61
H 0.025 0.035 0.64 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.91
M 0.085 0.095 2.16 2.41
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.045 0.060 1.14 1.52
R 0.038 0.048 0.97 1.22
K
J
A
H
G
B
F
E
C
D
L
R
T
C
MEASURING POINT AREA (REF.) 0.17 IN
2
MT2
O
P
N
M
MT1 GATE
.320
8.13
.526
13.36
.276
7. 0 1
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
60
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Dimensions — TO-251AA (V-Package) — V-PAK Through Hole
Dimension Inches Millimeters
Min Typ Max Min Typ Max
A 0.037 0.040 0.043 0.94 1.01 1.09
B 0.235 0.242 0.245 5.97 6.15 6.22
C 0.350 0.361 0.375 8.89 9.18 9.53
D 0.205 0.208 0.213 5.21 5.29 5.41
E 0.255 0.262 0.265 6.48 6.66 6.73
F 0.027 0.031 0.033 0.69 0.80 0.84
G 0.087 0.090 0.093 2.21 2.28 2.36
H 0.085 0.092 0.095 2.16 2.34 2.41
I 0.176 0.180 0.184 4.47 4.57 4.67
J 0.018 0.020 0.023 0.46 0.51 0.58
K 0.035 0.037 0.039 0.90 0.95 1.00
L 0.018 0.020 0.023 0.46 0.52 0.58
P 0.042 0.047 0.052 1.06 1.20 1.32
Q 0.034 0.039 0.044 0.86 1.00 1.11
R 0.034 0.039 0.044 0.86 1.00 1.11
S 0.074 0.079 0.084 1.86 2.00 2.11
AREA: 0.040 IN
2
T
C
MEASURING POINT
GATE
G
I
E
D
A
B
C
F
J
H
K
L
5.28
.208
5.34
.210
MT2
MT1
MT2
P
Q
RS
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Dimension Inches Millimeters
Min Typ Max Min Typ Max
A0.037 0.040 0.043 0.94 1.01 1.09
B 0.235 0.243 0.245 5.97 6.16 6.22
C 0.106 0.108 0.113 2.69 2.74 2.87
D 0.205 0.208 0.213 5.21 5.29 5.41
E 0.255 0.262 0.265 6.48 6.65 6.73
F 0.027 0.031 0.033 0.69 0.80 0.84
G 0.087 0.090 0.093 2.21 2.28 2.36
H 0.085 0.092 0.095 2.16 2.33 2.41
I 0.176 0.179 0.184 4.47 4.55 4.67
J 0.018 0.020 0.023 0.46 0.51 0.58
K0.035 0.037 0.039 0.90 0.95 1.00
L 0.018 0.020 0.023 0.46 0.51 0.58
M 0.000 0.000 0.004 0.00 0.00 0.10
N 0.021 0.026 0.027 0.53 0.67 0.69
O 0°0°5°0°0°5°
P 0.042 0.047 0.052 1.06 1.20 1.32
Q 0.034 0.039 0.044 0.86 1.00 1.11
M
O
N
H
J
L
K
.118
3
.063
1.60
.071
1.80
.264
6.71
.264
6.71
.181
4.60
GATE
MT2
MT1
MT2
T
C
MEASURING POINT
G
I
D
E
A
B
C
F
5.28
.208
5.34
.210
: 0.040 IN
2
AREA
P
Q
61
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
Packing Options
Part Number Marking Weight Packing Mode Base Quantity
L/Q004L/Ry/TP L/Qxx04L/Ry 2.2 g Bulk 500
L/Qxx04LyTP L/Qxx04Ly 2.2 g Tube 500 (50 per tube)
L/Qxx04DyRP L/Qxx04Dy 0.3 g Embossed Carrier 2500
L/Qxx04DyTP L/Qxx04Dy 0.3 g Tube Pack 750 (75 per tube)
L/Qxx04VyTP L/Qxx04Vy 0.4 g Tube Pack 750 (75 per tube)
Note: xx = Voltage; y = Sensitivity
Product Selector
Part Number Voltage Gate Sensitivity Quadrants Type Package
400V 600V 800V 1000V I – II – III IV
Lxx04L3 X X 3 mA 3 mA Sensitive Triac TO-220L
Lxx04D3 X X 3 mA 3 mA Sensitive Triac TO-252 D-PAK
Lxx04R3 X X 3mA 3mA Sensitive Triac TO-220R
Lxx04V3 X X 3 mA 3 mA Sensitive Triac TO-251 V-PAK
Lxx04L5 X X 5 mA 5 mA Sensitive Triac TO-220L
Lxx04D5 X X 5 mA 5 mA Sensitive Triac TO-252 D-PAK
Lxx04R5 X X 5mA 5mA Sensitive Triac TO-220R
Lxx04V5 X X 5 mA 5 mA Sensitive Triac TO-251 V-PAK
Lxx04L6 X X 5 mA 10 mA Sensitive Triac TO-220L
Lxx04D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK
Lxx04R6 X X 5mA 10mA Sensitive Triac TO-220R
Lxx04V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK
Lxx04L8 X X 10 mA 20 mA Sensitive Triac TO-220L
Lxx04D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK
Lxx04R8 X X 10mA 20mA Sensitive Triac TO-220R
Lxx04V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK
Qxx04L3 X X 10 mA Standard Triac TO-220L
Qxx04D3 X X 10 mA Standard Triac TO-252 D-PAK
Qxx04V3 X X 10 mA Standard Triac TO-251 V-PAK
Qxx04R3 X X 10mA Standard Triac TO-220R
Qxx04L4 X X X X 25 mA Standard Triac TO-220L
Qxx04D4 X X X X 25 mA Standard Triac TO-252 D-PAK
Qxx04R4 X X X X 25mA Standard Triac TO-220R
Qxx04V4 X X X X 25 mA Standard Triac TO-251 V-PAK
62
Revised: 09/23/13
©2013 Littelfuse, Inc
Specifications are subject to change without notice.
Teccor® brand Thyristors
4 Amp Sensitive & Standard Triacs
Lxx04xx & Qxx04xx Series
0.512 (13.0) Arbor
Hole Dia.
DC
XXXXXX
XXXXXX
DC
XXXXXX
DC
XXXXXX
XX
XX
XX
Gate MT1
MT2
0.63
(16.0)
0.157
(4.0)
0.64
(16.3)
12.99
(330.0)
0.524
(13.3)
0.315
(8.0)
0.059 DIA
(1.5)
*
*Cover tape
Direction of Feed
Dimensions
are in inches
(and millimeters).
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
Part Marking SystemPart Numbering System
Q 60 04L4
DEVICE TYPE
L : Sensitive Triac
Q : Standard Triac
LEAD FORM DIMENSIONS
xx : Lead Form Option
CURRENT RATING
SENSITIVITY & TYPE
Sensitive Triac:
3 : 3 mA (QI, II, III, IV)
5 : 5 mA (QI, II, III, IV)
6 : 5 mA (QI, II, III)
10 mA (QIV)
8 : 10 mA (QI, II, III)
20 mA (QIV)
Standard Triac:
3 : 10 mA (QI, II, III)
4 : 25 mA (QI, II, III)
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
V : TO-251 (V-Pak)
D : TO-252 (D-Pak)
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
04 : 4A
xx
®
MY
Q6004R4
TO-220 AB - (L and R Package)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
L6004V4
YMLDD ®
TO-252AA- (D Package)
TO-251AA- (V Package)
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
L6004V4
YMLDD ®