SMT COMMON MODE CHOKES for PoE+ Applications RoHS peak reflow temperature rating 245C Meets IEEE 802.3 specification Electrical Specifications @ 25C - Operating Temperature -0C to +70C Part Number1, 2, 3 SRF (TYP) MAX Inter-winding Capacitance (pF) Leakage Inductance (H MAX) OCL (35%) DC Resistance ( MAX) Impedance Curves4 H6500NL 110 MHz 8 0.12 15 H 0.15 1 H6501NL 60 MHz 15 0.15 30 H 0.20 2 H6502NL 42 MHz 18 0.20 60 H 0.25 3 H6503NL 26 MHz 25 0.25 100 H 0.30 4 H6504NL 7.0 MHz 10 0.20 250 H 0.18 5 H6505NL 5.5 MHz 18 0.25 500 H 0.28 6 H6506NL 2.6 MHz 30 0.30 1 mH 0.35 7 H6507NL 300 MHz 120 1.0 20 mH 1.50 8 Notes: 1. Turns Ratio: (1 - 4) : (5 - 8) = 1:1 (3%) 2. Between channel isolation: 500 VAC @ 60 seconds 3. Polarity: per schematic 4. For Tape & Reel packaging, add a "T" suffix to the end of the part number when ordering (i. e. H6500NL becomes becomes H6500NLT). 5. See charts page 2 1 H604.C (02/19) SMT COMMON MODE CHOKES for PoE+ Applications Mechanicals Schematics H6500NL-H6506NL Weight ....................0.4 grams Tape & Reel ........................750 Tube .....................................85 Dimensions: Inches mm Unless otherwise specified, all tolerances are Mechanicals .010 0.25 Schematics H6507NL H6507NL Weight ......................1.8 grams Tape & Reel ........................250 Tube .....................................40 2 Networking.PulseElectronics.com H604.C (02/19) SMT COMMON MODE CHOKES for PoE+ Applications Impedence Curves H6500NL-H6506NL Impedence Curves H6507NL For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 3 Networking.PulseElectronics.com H604.C (02/19)