Safety footswitch Safety latch with manual reset Type Reference Part number Circuit diagram ) pressure point latch Slow make & break/snap action Pressure point Latching switch Potentiometer Pedal interlocking Emergency stop function Power contactor ne max Valtage Permanent current max. In-rush current complies with standards IEC 947-5-1 AC 15/DC 13 Switching frequency max. Mechanical life - number of switching actions Mechanical life number of revolutions Operating temperature min./max. Approvais Cable entry Weight Stock status: Ex stock/Built to order _ All dimensions in mm (inch) eT F1-SU1Z/UV1 DUN 616.1000.203 33 +> 34 Ty 500 V AC 140A e ee 50/min. 10x 10 -30 C/+80 C -29 F /+176 F WOR BG 1x Pg 13.5 1.50 kg/.3 Ib o/- OFF ON STOP 1. Pressing the pedal to the pressure point closes the contact and the operating process starts. 2. In.an emergency situation the pressure paint is overcome the contact is opened and locked the operating process is then on hold. The interlock holds the contact in the off position ensuring that an uncontrolled restart or new start of the machine cannot happen. 3. Interlocking: Only by releasing the locking device manually (pressure button on the side of the housing), after the dangerous situation has passed, the contacts are set to normal again. The operating process can then begin again by operating the pedal to the pressure point.