Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
SCHRACK
Miniature Power PCB Relay MSR
n1 pole 8 / 10 A, 1CO or 1NO contact
nHigh inrush currents with AgSnO contacts (TV4 = 65 A)
n4 kV/8 mm coil-contact
nReinforced insulation (protection class II)
nAmbient temperature up to 85°C at 8 A
nPlastic materials according to IEC60335-1 (domestic appliances)
Applications
HVAC, interface technology, power supplies, TV- / Monitor control,
computer- / communication technology, domestic appliances, Hi-Fi
products, timers F0143-E
Approvals
VREG.-Nr. 3919, ZE214024
Technical data of approved types on request
Contact data
Contact configuration 1CO or 1NO
Contact set single contact
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current versions A,B: 8 A
versions C,D: 10 A
Maximum breaking capacity AC 2000 VA
Limiting making capacity, max 20 ms A302: 65 A
max 4 s, duty factor 10% 15 A
Contact material AgSnO2, AgNi90/10
Rated frequency of operation with / without load 6 / 1200 min-1
Operate- / release time max 10 / 5 ms
Bounce time NO / NC contact max 3 / 10 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
V23061-A1***-A302 NO 8 A, 250 VAC, cosϕ=1 85°C 100x103
V23061-C2***-A802 NO 10 A, 250 VAC, cosϕ=1 85°C 100x103
V23061-C2***-A802 NO 5 A, 250 VAC, cosϕ=1 105°C 100x103
UL 508
V23061-A1***-A302 NO TV4, Tungsten, 120 VAC 40°C 25x103
V23061-A1***-A302 NO Pilot duty, A300 40°C 6x103
V23061-C2***-A802 NO 10 A, 240 VAC, general purpose 40°C 30x103
EN60730-1
V23061-A1***-A302 NO 2(2)A, 250 VAC 85°C 100x103
V23061-C2***-A802 NO 4(4)A, 250 VAC 85°C 100x103
Coil data
Rated coil voltage range DC coil 3...60 VDC
Operative range to IEC 61810 2
Coil insulation system according UL1446 Class A, Class F