LSI7202XP-LC - LSI Logic Corporation

KEY APPLICATIONS

•Storage Area Networks (SANs)

•Server to storage interconnect

•SAN clustering

FEATURES

•One, two, four independent,

2 Gbit/s channels (Up to

400 MBps, full duplex)

•Auto-negotiation for legacy

connect (1 or 2 Gbit/s)

•64 bit/133 MHz PCI-X bus

(backward compatible with 32-bit

and 33/66 MHz buses)

•SFP, multi-mode optics,

LC connector

•Supports target mode and

SCSI initiator concurrently

•FC-Tape support

•Software supports switch and

loop (private and public)

topologies

•SNIA HBA API compliant

•CIM based server management

•Supports all major

operating systems

•Fusion-MPT™architected

•5 year limited warranty

LSI7002XP Fibre Channel: Single,

Dual, & Quad PCI-X Host Adapters

LSI7002XP FAMILY ORDERING INFORMATION

LSI7402XP-LC Quad port, LC, SFP, multi-mode optics

LSI7202XP-LC Dual port, LC, SFP, multi-mode optics

LSI7102XP-LC Single port, LC SFP, multi-mode optics

MAXIMIZE YOUR THROUGHPUT WITH LSI LOGIC’S INDUSTRY

LEADING PCI-X, 2 GBIT/S FIBRE CHANNEL ADAPTERS

Designed for data mining, video and media streaming, and high availability

applications, LSI Logic’s family of PCI-X, 64-bit, 133 MHz Fibre Channel

host adapters provides industry-leading 2 Gbit/s Fibre Channel perform-

ance for high band-width applications and offers total bus throughput.

LSI Logic’s LSI7402XP quad port PCI-X host adapter incorporates two

LSIFC929X dual channel 2Gbit/s Fibre Channel controller devices, and a

133 MHz PCI-X bridge chip. LSI Logic’s LSIFC929X, the highest performance

dual channel controller available, incorporates LSI Logic’s Fusion-MPT

architecture for maximum performance with minimum host overhead. The

LSI7402XP maximizes your only PCI-X slot and offers increased connectivity

by offering four independent fibre channels on one host bus adapter.

LSI Logic also offers the LSI7202XP dual channel, 2Gbit/s PCI-X host

adapter and the LSI7102XP single channel, 2Gbit/s PCI-X host adapter.

Both host bus adapters are designed in the Low Profile PCI form factor making

them the right choice for 1U and 2U rackmount and standard servers.

LSI Logic’s PCI-X host adapter family supports switched fabric, arbitrated

loop and point to point topologies. Drivers for all major operating systems

are available at http://www.storageio.lsilogic.com.

For more information please visit

the LSI Logic web site at:

http://storageio.lsilogic.com

LSI Logic Corporation

North American Headquarters

Milpitas, CA

Tel: 866 574 5741

Host Adapter Group

Southborough, MA

Tel: 888 429 0425

FAX: 508 485 0303

LSI Logic Europe Ltd.

European Headquarters

United Kingdom

Tel: 44 1344 426544

Fax: 44 1344 481039

LSI Logic KK Headquarters

Tokyo, Japan

Tel: 81 3 5463 7165

Fax 81 3 5463 7820

ISO 9001 Certified

The LSI Logic logo design, Fusion-MPT and Integrated

Mirroring are trademarks or registered trademarks of

LSI Logic Corporation. All other brand and product

names may be trademarks of their respective companies.

LSI Logic Corporation reserves the right to make

changes to any products and services herein at

any time without notice. LSI Logic does not assume

any responsibility or liability arising out of the

application or use of any product or service described

herein, except as expressly agreed to in writing

by LSI Logic; nor does the purchase, lease, or

use of a product or service from LSI Logic convey

a license under any patent rights, copyrights,

trademark rights, or any other of the intellectual

property rights of LSI Logic or of third parties.

Order No. S20099

10/02-1M – Printed in USA

LSI7002XP Fibre Channel: Single,

Dual, & Quad PCI-X Host Adapters

Technical Specifications

Data Transfers 400 MBps per channel, full-duplex

Protocols SCSI, IP

Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port)

Class of Service Class 2, Class 3

OS Support Windows NT4.0, Windows 2000, Solaris X86, SPARC, Linux, Novell

NetWare, UnixWare

Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA,

FC-FLA, FCA-IP, IETF-IPFC, FC-Tape, PCI-X 1.0,

PCI 2.2, and 99 compliant

Size 6.875” x 4.2”: LSI7402XP

6.6” x 2.53”: LSI7102XP and LSI7202XP

PCI Form Factor Short card PCI 2.2: LSI7402XP

Low profile PCI2.2, MD2: LSI7102XP and LSI7202XP

PCI Bus 64-bit, 133 MHz max (backwards compatible with 32-bit, 66 MHz buses)

PCI Modes Bus Master DMA

PCI Card Type LSI7402XP: 3.3 V add in card (3.3 V signaling)

LSI7102XP, LSI7202XP: Universal add in card (3.3 V and 5 V signaling)

PCI Voltage 3.3 V ±5%

PCI Power 15 W/7.5 W (depending on board type)

Bracket Standard height

External Connectors LC, multi-mode optics, SFP

Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO

Environments Operating Storage

Temperature 0°C to 55°C -40°C to +105°C

Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing

Max Dew Point +32°C

FUSION-MPT ARCHITECTURE

Based on industry standard ARM®technology, the LSI Logic 2 Gbit product

family incorporates Fusion-MPT architecture, a single binary device driver for

Fibre Channel, SCSI and emerging interface technologies such as InfiniBand,

Serial ATA and others. Thinner drivers allow for better and more versatile

performance while adding value at the firmware level. Fusion-MPT provides

the flexibility and rich feature set to make options like Integrated Mirroring™

possible for boot volume protection at no additional cost.