Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FDB0300N1007L N-Channel PowerTrench(R) MOSFET 100 V, 200 A, 3 m Features General Description This N-Channel MOSFET is produced using Fairchild Semiconductor's advance PowerTrench(R) process that has been especially tailored to minimize the on-state resistance while maintaining superior ruggedness and switching performance for industrial applications. Max rDS(on) = 3 m at VGS = 10 V, ID = 26 A Max rDS(on) = 4.5 m at VGS = 6 V, ID = 20 A Fast Switching Speed Low Gate Charge Applications High Performance Trench Technology for Extremely Low RDS(on) Industrial Motor Drive Industrial Power Supply High Power and Current Handling Capability Industrial Automation RoHS Compliant Battery Operated tools Battery Protection Solar Inverters UPS and Energy Inverters Energy Storage Load Switch D(Pin4, tab) 4 12 3 56 7 1. Gate 2. Source/Kelvin Sense 3. Source/Kelvin Sense 4. Drain 5. Source 6. Source 7. Source G (Pin1) D2-PAK (TO263) S(Pin2,3,5,6,7) MOSFET Maximum Ratings TC = 25 C unless otherwise noted. Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current -Continuous -Continuous ID PD TJ, TSTG Units V 20 V TC = 25C (Note 5) TC = 100C (Note 5) 140 (Note 4) 1090 -Pulsed EAS Ratings 100 Single Pulse Avalanche Energy (Note 3) Power Dissipation TC = 25C Power Dissipation TA = 25C 200 843 250 (Note 1a) Operating and Storage Junction Temperature Range 3.8 -55 to +175 A mJ W C Thermal Characteristics RJC Thermal Resistance, Junction to Case RJA Thermal Resistance, Junction to Ambient (Note 1) 0.6 (Note 1a) 40 C/W Package Marking and Ordering Information Device Marking FDB0300N1007L Device FDB0300N1007L (c)2016 Fairchild Semiconductor Corporation FDB0300N1007L Rev.C1 Package D2-PAK-7L 1 Reel Size 330 mm Tape Width 24 mm Quantity 800 units www.fairchildsemi.com FDB0300N1007L N-Channel PowerTrench(R) MOSFET March 2016 Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250 A, VGS = 0 V BVDSS TJ Breakdown Voltage Temperature Coefficient ID = 250 A, referenced to 25 C IDSS Zero Gate Voltage Drain Current VDS = 80 V, VGS = 0 V 1 A IGSS Gate to Source Leakage Current VGS = 20 V, VDS = 0 V 100 nA 4 V 100 V 57 mV/C On Characteristics (Note 2) VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 A VGS(th) TJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250 A, referenced to 25 C rDS(on) Static Drain to Source On Resistance gFS Forward Transconductance 2 2.7 -12 mV/C VGS = 10 V, ID = 26 A 2.4 3 VGS = 6 V, ID = 20 A 3.4 4.5 VGS = 10 V, ID = 26 A, TJ = 150C 4.9 11 VDS = 10 V, ID = 26 A 85 m S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance VDS = 50 V, VGS = 0 V, f = 1 MHz 5925 8295 pF 1220 1710 pF 42 60 pF 2.7 Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge VGS = 0 V to 10 V Qg Total Gate Charge VGS = 0 V to 5 V Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller" Charge VDD = 50 V, ID = 26 A, VGS = 10 V, RGEN = 6 VDD = 50 V, ID = 26 A 28 45 ns 29 46 ns 52 83 ns 18 32 ns 81 113 nC 44 62 24 nC 16 nC Drain-Source Diode Characteristics IS Maximum Continuous Drain to Source Diode Forward Current 200 A ISM Maximum Pulsed Drain to Source Diode Forward Current 1090 A VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = 26 A (Note 2) IF = 26 A, di/dt = 100 A/s 0.8 1.2 V 84 134 ns 128 205 nC Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 40 C/W when mounted on a 1 in2 pad of 2 oz copper. b) 62.5 C/W when mounted on a minimum pad of 2 oz copper. 2. Pulse Test: Pulse Width < 300 s, Duty cycle < 2.0 %. 3. EAS of 843 mJ is based on starting TJ = 25 C, L = 0.3 mH, IAS = 75 A, VDD = 90 V, VGS = 10 V. 100% test at L = 0.1 mH, IAS = 108 A. 4. Pulsed Id please refer to Figure "Forward Bias Safe Operating Area" for more details. 5. Computed continuous current limited to Max Junction Temperature only, actual continuous current will be limited by thermal & electro-mechanical application board design. (c)2016 Fairchild Semiconductor Corporation FDB0300N1007L Rev.C1 2 www.fairchildsemi.com FDB0300N1007L N-Channel PowerTrench(R) MOSFET Electrical Characteristics TJ = 25 C unless otherwise noted. 3 VGS = 10 V VGS = 8 V 200 VGS = 7 V VGS = 6.5 V VGS = 6 V 100 PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX 0 0 1 2 PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX NORMALIZED DRAIN TO SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) 300 2 1 0 0 3 VGS = 10 V VGS = 8 V VGS = 7 V 100 VDS, DRAIN TO SOURCE VOLTAGE (V) 200 300 ID, DRAIN CURRENT (A) Figure 1. On Region Characteristics Figure 2. Normalized On-Resistance vs. Drain Current and Gate Voltage 20 ID = 26 A VGS = 10 V 2.2 rDS(on), DRAIN TO 2.0 1.8 1.6 1.4 1.2 1.0 0.8 SOURCE ON-RESISTANCE (m) 2.4 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE VGS = 6.5 V VGS = 6 V PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX 15 ID = 26 A 10 TJ = 150 oC 5 TJ = 25 oC 0.6 -75 -50 -25 0 25 50 75 100 125 150 175 TJ, JUNCTION TEMPERATURE (oC) 0 Figure 3. Normalized On Resistance vs. Junction Temperature Figure 4. On-Resistance vs. Gate to Source Voltage IS, REVERSE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX VDS = 5 V TJ = 175 oC 100 TJ = 25 oC TJ = -55 oC 0 2 3 4 5 6 5 6 7 8 9 300 100 VGS = 0 V 10 TJ = 175 oC 1 0.1 TJ = 25 oC 0.01 TJ = -55 oC 0.001 0.0 7 0.2 0.4 0.6 0.8 1.0 VGS, GATE TO SOURCE VOLTAGE (V) VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics Figure 6. Source to Drain Diode Forward Voltage vs. Source Current (c)2016 Fairchild Semiconductor Corporation FDB0300N1007L Rev.C1 10 VGS, GATE TO SOURCE VOLTAGE (V) 300 200 4 3 1.2 www.fairchildsemi.com FDB0300N1007L N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted. 10000 ID = 26 A Ciss 8 VDD = 25 V CAPACITANCE (pF) VGS, GATE TO SOURCE VOLTAGE (V) 10 VDD = 50 V 6 VDD = 75 V 4 2 0 0 20 40 60 80 1000 Coss 100 f = 1 MHz VGS = 0 V 10 0.1 100 1 10 100 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) Figure 7. Gate Charge Characteristics Figure 8. Capacitance vs. Drain to Source Voltage 2000 1000 100 ID, DRAIN CURRENT (A) 1000 IAS, AVALANCHE CURRENT (A) Crss TJ = 25 oC TJ = 150 oC 10 10 s 100 10 1 THIS AREA IS LIMITED BY rDS(on) 100 s SINGLE PULSE TJ = MAX RATED 1 ms RJC = 0.6 oC/W o TC = 25 C 1 0.001 0.01 0.1 1 10 100 0.1 0.1 1000 tAV, TIME IN AVALANCHE (ms) 10 ms 100 ms/DC CURVE BENT TO MEASURED DATA 1 10 100 1000 VDS, DRAIN to SOURCE VOLTAGE (V) Figure 10. Forward Bias Safe Operating Area Figure 9. Unclamped Inductive Switching Capability 5 P(PK), PEAK TRANSIENT POWER (W) 10 SINGLE PULSE o RJC = 0.6 C/W o TC = 25 C 4 10 3 10 2 10 -5 10 -4 10 -3 -2 10 10 -1 10 1 t, PULSE WIDTH (sec) Figure 11. Single Pulse Maximum Power Dissipation (c)2016 Fairchild Semiconductor Corporation FDB0300N1007L Rev.C1 4 www.fairchildsemi.com FDB0300N1007L N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 2 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 t2 0.01 NOTES: ZJC(t) = r(t) x RJC RJC = 0.6 oC/W Peak TJ = PDM x ZJC(t) + TC Duty Cycle, D = t1 / t2 SINGLE PULSE 0.001 -5 10 -4 10 -3 -2 10 10 -1 10 1 t, RECTANGULAR PULSE DURATION (sec) Figure 12. Junction-to-Case Transient Thermal Response Curve (c)2016 Fairchild Semiconductor Corporation FDB0300N1007L Rev.C1 5 www.fairchildsemi.com FDB0300N1007L N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted. 10.20 9.70 A 1.40 1.00 10.50 8.40 9.40 9.00 10.20 1.40 MAX C 3.45 0.73 1 7 0.95 0.90 0.70 (1.27) 6X 1.27 6X 7.62 0.70 C 0.50 LAND PATTERN RECOMMENDATION 0.25 A M 7.62 B 8.78 8.38 1.40 1.20 4.70 4.30 7.70 MIN 8 C 1 7 0.60 0.40 0.254 0.20 MAX GAGE PLANE NOTES: C OUT OF JEDEC STANDARD VALUE. D. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. E. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. F. LAND PATTERN RECOMMENDATION PER IPC. TO127P1524X465-8N. G. DRAWING FILE NAME: TO263A07REV5. 5.20 4.80 R0.50 2.84 2.44 A A. PACKAGE CONFORMS TO JEDEC TO-263 VARIATION CB EXCEPT WHERE NOTED. B. ALL DIMENSIONS ARE IN MILLIMETERS. SEATING PLANE C 15.70 15.10 0.20 B 0 - 8 DETAIL A SCALE 2:1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com