Carling
Technologies
™
23
www.carlingtech.com
LS-Series Rocker Switches
2 LIGHTING SEQUENCE1,2
position 1 position 2 position 3
01 red red red
02 amber amber amber
03 green green green
10 red --- none
11 red clear red
12 red clear amber
13 red clear green
14 red clear blue
15 red clear clear
20 amber --- none
21 amber clear red
22 amber clear amber
23 amber clear green
24 amber clear blue
25 amber clear clear
30 green --- none
31 green clear red
32 green clear amber
33 green clear green
34 green clear blue
35 green clear clear
40 blue --- none
41 blue clear red
42 blue clear amber
43 blue clear green
44 blue clear blue
45 blue clear clear
50 clear --- none
51 clear clear red
52 clear clear amber
53 clear clear green
54 clear clear blue
55 clear clear clear
3 ACTUATOR COLOR4
BL black
WH white
5
Lamp
Voltage
LS1511
1
Base Part Number
NOTES
1Independent lamp is standard. Dependent lamp with ON-OFF function
(including momentary) is available with Lighting Sequences 10, 20, 30, 40
and 50. (No light in OFF position.)
2Green and blue not recommended with 125 volt or 250 volt neon lamps.
3Additional terminations available. Consult factory.
4Custom colors available. Consult factory.
( ) Indicates momentary function.
5 LAMP VOLTAGE2
neon
125 125 volts neon
250 250 volts
incandescent
006 6 volts
012 12 volts
018 18 volts
024 24 volts
--
2
Lighting
Sequence
4
Base
Color
BL 012
1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/
CIRCUITRY2/RATING/TERMINATION3
10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC
Single Pole solder lug .250 tab screw term. wire leads
ON-NONE-OFF LS1510 LS1511 LS1514 LS1515
ON-NONE-(OFF) LS1520 LS1521 LS1524 LS1525
(ON)-NONE-OFF LS1530 LS1531 LS1534 LS1535
ON-NONE-ON LS1540 LS1541 LS1544 LS1545
ON-NONE-(ON) LS1550 LS1551 LS1554 LS1555
ON-OFF-ON LS1560 LS1561 LS1564 LS1565
ON--OFF-(ON) LS1570 LS1571 LS1574 LS1575
(ON)-OFF-(ON) LS1580 LS1581 LS1584 LS1585
13 -
3
Actuator
Color
BL -
4 BASE COLOR4
BL black
WH white
LS-Series Rocker Switches
The LS-Series Softspot illuminated rocker switches feature
a three-color high brightness light sequence, from a single
lamp. These switches are designed with a standard nylon
snap-in bracket and “Drip-Dry” construction that protects the
front panel from dust and moisture, and are ideal for Marine
and Transportation industry applications.
Dielectric Strength
1000V - live to dead metal parts
Electrical Life
50,000 cycles- maintained
25,000 cycles- momentary
Mechanical Life
100,000 cycles
Operating Temperature
0°F to 150°F (-17.8°C to +65.6°C)
TERMINAL TYPE
WIRE LEAD
SCREW
(ASSEMBLED)
PRINTED
CIRCUIT
.250 TAB (Q.C.)
#6-32NC-2
THREAD
.187 TAB (Q.C.) SOLDER LUG
MOUNTING HOLE
(Nylon Snap-in Brackets)
Panel Thickness:
.040 min. - .250 max.
Switch should be mounted at 90° for
maximum water shedding
(45° to 90° acceptable)
* Angled corners are suggested for optimum fit.
Standard rectangular cutout is acceptable.
.150[3.81] DIA
.055[1.40] DIA
.187[4.75]
4 plcs*
.187[4.75]
.350[8.89]
.187[4.74]
.330[8.38]
.075[1.91] DIA
.437[11.09]
.250[6.35]
.500[12.70]
6.000[152.40]
.141[3.58]
.286[7.26]
.370[9.39]
.125[3.18] DIA
.422[10.72]
1.700[43.18]
.830[21.08]
1.450[36.83]
1.084[27.53]
.960[24.38]
1.190[30.22]
55°
.680[17.27]
.372[9.45]
.394[10.00]
.187[4.74]
