PT12 SERIES Polypropylene Capacitor Polypropylene Plastic Film Wrap, Epoxy End Fill Type Polypropylene Plastic Film Wrap, Epoxy End Fill Type. Among these is the type PT12 polypropylene precision capacitors, which exhibit unique and outstanding electrical and environmental characteristics. FEATURES - Negligible shift in capacitance under long term exposure to humidity, operating life and temperature cycling. - Insulation resistance, dielectric absorption and dissipation factor properties are all equivalent, or superior to those of polystyrene Rev. 2 Specification Summary Capacitance Range 0.001F to 2.0F Capacitance Tolerance Standard tolerance is 10% tolerances of 20%,5%,2%, and 1% are available. Quality Control Capacitors are tested 100% for: Capacitance tolerance Dissipation Factor Dielectric withstanding voltage Insulation Resistance Equivalent Series Resistance (ESR) Operating Temperature Range From -55C to +105C Process and inspection data are maintained on file and available on special request. Enclosure/ Construction Plastic film case with epoxy end seal. Environmental Voltage Rating 100VDC to 600VDC Parameter Vibration Immersion Shock Humidity Thermal Shock Life Condition 204 104 213 106 107 108 Reference MIL-STD-202 Method B B I A F Characteristics Insulation Resistance Temperature(C) 25 85 Megaohmsx 500,000 100,000 Microfarads 105 10,000 Insulation Resistance Capacitance Change Temperature(C) -55 PercentageChange 1.4 (Typical) 25 0 85 -2.5 105 -3.5 CapacitanceChange Dissipation Factor When measured at the frequency specified for capacitance measurement , the dissipation factor shall not exceed .05%. Dielectric Strength Capacitors will withstand a DC potential of twice rated voltage for one minute through a limiting resistance of 100 ohms/volt without damage or breakdown. Rev. 2 ELECTRICAL EC PART NUMBER PT12_102_ PT12_152_ PT12_222_ PT12_332_ PT12_392_ PT12_472_ PT12_562_ PT12_682_ PT12_822_ PT12_103_ PT12_153_ PT12_223_ PT12_333_ PT12_393_ PT12_473_ PT12_563_ PT12_683_ PT12_823_ PT12_104_ PT12_124_ PT12_154_ PT12_184_ PT12_224_ PT12_274_ PT12_334_ PT12_394_ PT12_474_ PT12_564_ PT12_684_ PT12_824_ PT12_105_ PT12_125_ PT12_155_ PT12_185_ PT12_205_ CAP f 0.0010 0.0015 0.0022 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.0100 0.0150 0.0220 0.0330 0.0390 0.0470 0.0560 0.0680 0.0820 0.1000 0.1200 0.1500 0.1800 0.2200 0.2700 0.3300 0.3900 0.4700 0.5600 0.6800 0.8200 1.0000 1.2000 1.5000 1.8000 2.0000 DATA 100 VDC 150 VDC 200 VDC 400 VDC 600 VDC D E F J K D L AWG D L AWG D L AWG D L AWG D L AWG 0.187 0.406 24 0.187 0.406 24 0.187 0.406 24 0.187 0.406 24 0.187 0.500 24 0.187 0.406 24 0.187 0.406 24 0.187 0.406 24 0.203 0.406 24 0.203 0.500 24 0.187 0.406 24 0.187 0.406 24 0.187 0.406 24 0.234 0.406 24 0.234 0.500 24 0.187 0.406 24 0.187 0.406 24 0.203 0.406 24 0.187 0.500 24 0.203 0.625 24 0.187 0.406 24 0.187 0.406 24 0.218 0.406 24 0.187 0.500 24 0.218 0.625 24 0.187 0.406 24 0.187 0.406 24 0.187 0.500 24 0.203 0.500 24 0.234 0.625 24 0.187 0.406 24 0.187 0.406 24 0.187 0.500 24 0.218 0.500 24 0.250 0.625 24 0.187 0.406 24 0.203 0.406 24 0.187 0.500 24 0.234 0.500 24 0.281 0.625 22 0.187 0.406 24 0.218 0.406 24 0.187 0.500 24 0.203 0.625 24 0.250 0.750 24 0.234 0.406 24 0.187 0.500 24 0.203 0.500 24 0.218 0.625 24 0.281 0.750 22 0.250 0.406 24 0.219 0.500 24 0.203 0.625 24 0.265 0.625 22 0.328 0.750 22 0.218 0.500 24 0.250 0.500 24 0.234 0.625 24 0.312 0.625 22 0.343 0.875 22 0.265 0.500 22 0.234 0.625 24 0.281 0.625 22 0.328 0.750 22 0.421 0.875 22 0.281 0.500 22 0.250 0.625 24 0.312 0.625 22 0.359 0.750 22 0.437 0.875 22 0.250 0.625 24 0.281 0.625 22 0.296 0.750 22 0.390 0.750 22 0.500 0.875 20 0.265 0.625 22 0.250 0.750 24 0.312 0.750 22 0.421 0.750 22 0.437 1.187 22 0.281 0.625 22 0.281 0.750 22 0.343 0.750 22 0.406 0.875 22 0.484 1.187 20 0.296 0.750 22 0.312 0.750 22 0.375 0.750 22 0.437 0.875 22 0.531 1.187 20 0.328 0.750 22 0.344 0.750 22 0.406 0.875 22 0.484 0.875 20 0.578 1.187 20 0.328 0.750 22 0.375 0.750 22 0.406 0.875 22 0.453 1.187 20 0.625 1.187 20 0.328 0.875 22 0.375 0.875 22 0.453 0.875 20 0.500 1.187 20 0.703 1.187 20 0.343 0.875 22 0.406 0.875 22 0.484 0.875 20 0.546 1.187 20 0.687 1.437 20 0.375 0.875 22 0.437 0.875 22 0.484 1.062 20 0.687 1.187 20 0.750 1.437 20 0.390 1.062 22 0.437 1.062 22 0.531 1.062 20 0.578 1.437 20 0.828 1.437 20 0.421 1.062 22 0.500 1.062 20 0.593 1.062 20 0.640 1.437 20 0.812 1.687 20 0.453 1.062 20 0.531 1.062 20 0.593 1.187 20 0.687 1.437 20 0.890 1.687 20 0.468 1.187 20 0.531 1.187 20 0.656 1.187 20 0.750 1.437 20 0.968 1.687 20 0.515 1.187 20 0.578 1.187 20 0.625 1.437 20 0.825 1.437 20 0.968 1.937 20 0.562 1.187 20 0.625 1.187 20 0.687 1.437 20 0.825 1.687 20 1.062 1.937 20 0.609 1.187 20 0.625 1.437 20 0.687 1.687 20 0.906 1.687 20 1.156 1.937 20 0.671 1.187 20 0.687 1.437 20 0.734 1.687 20 1.000 1.687 20 1.125 1.937 20 0.671 1.437 20 0.750 1.437 20 0.875 1.687 20 1.125 1.687 20 1.312 2.187 20 0.656 1.687 20 0.750 1.687 20 0.843 1.937 20 1.125 1.937 20 1.500 2.187 20 0.718 1.687 20 0.828 1.687 20 0.921 1.937 20 1.250 1.937 20 1.625 2.187 20 0.703 1.937 20 0.781 1.937 20 0.984 1.937 20 1.187 2.187 20 1.750 2.187 20 Note: The 5th character of the part number represents the DC Voltage Rating: D=100, E=150, etc. Additionally, the 9th character of the part number represents capacitance tolerance: M=20%, K= 10%, J= 5%, G= 2%, & F= 1%. *The lead length is 1.5" minimum. The lead material is copper clad steel, solder coated. * Rev. 2 MECHANICAL DATA Tolerances: Length: +3/32", -1/6" Diameter: 0.249" andunder+/-0.032" 0.250" to 0.500" +/-0.046" 0.501" andover +/-0.062" Rev. 2 ADDITIONAL INFORMATION These polypropylene capacitors are designed for use from -55C to +105C without derating. Therefore, type PT12 can be used in high temperature applications when it is not feasible to use polystyrene capacitors(which have an upper limit of 85C). Polypropylene capacitors are excellent for all critical applications which require high insulation resistance, high Q, extreme stability, close tolerance, low dielectric absorption and dissipation factor. The temperature makes an excellent choice for high Q tuned circuits, precision circuits, pulse networks and RC circuits. HOW TO ORDER TYPE PT Polypropylene STYLE/TERMINALS/VOLTAGE number represents the style, the second number represents the Terminals and the third letter represents the Voltage CAPACITANCE IN PICOFARADS Expressed in picofarads, the two digits are third is the number of zeros. (e.g., 104 equals 100.000pF) The TOLERANCE 12 E104 K M=+20% K=+10% J=+5% G=+2% F=+1% Marking And Date Code All capacitors are marked with company initials "EC", corporate logo or EC trademark--in addition to type PT12, capacitance, two digits of the date code represent the year, the second two digits the tolerance, rated DC working voltage and date code. The week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009. Quality Assurance Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Company. Raw material inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology, compact capacitor designs and establishing reliability procedures. Sales United States Eastern: *Headquarters* P.O. Box 1278 Eatontown,NJ 07724 Tel: 732-542-7880 Fax: 732-542-0524 Central: Illinois 630-668-8747 email: sales@ecicaps.com website:www.ecicaps.com Europe Ireland Electronic ConceptsEurope LTD IDA Estate, Oughterad Co. Galway, Ireland tel: +353-91-552385,552432 fax: +353-91-552387 email: sales@ecicaps.ie website:www.electronicconcepts.ie Rev. 2