20.32mm (0.8INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA08-12SYKWA Super Bright Yellow Features Description z 0.8 inch digit height. The Super Bright Yellow device is made with AlGaInP (on z Excellent character appearance. GaAs substrate) light emitting diode chip. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 Selection Guide Iv (ucd) [1] @ 10mA Part No. Dice SA08-12SYKWA Lens Type Super Bright Yellow (AlGaInP) Description Min. Typ. 52000 140000 *21000 *42000 White Diffused Common Anode,Lt Hand Decimal. Note: 1.Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40C To +85C 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 Super Bright Yellow SA08-12SYKWA SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 PACKING & LABEL SPECIFICATIONS SA08-12SYKWA SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM8404 REV NO: V.1A DATE: JAN/20/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301003065 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: SA08-12SYKWA