Oscilloscopes and Generators
972
b
ALLIED Letter ÒQÓ In Stock Number Indicates Direct Factory Shipment To You
500 MHz Oscilloscopes
The right answer for your applications, from digital to RF.
c
54610B Is the IndustryÕs Lowest-Cost 500 MHz Scope
c
54615B Offers 250 MHz Single-Shot Bandwidth
c
54616B/C Offers 500 MHz Single-Shot Bandwidth and a Sample Rate of 2 GSa/s
If you need the bandwidth to handle demanding applications, but want a troubleshooting and debugging scope thatÕs ideal for your lab, AgilentÕs 500 MHz scopes in
the HP 54600 Series are sure to offer a solution.
Many scopes offer good sample rate performance at fast sweep speeds but run into trouble as you slow the sweep down. But no matter how slowly you sweep the
HP 54615B, 54616B or 54616C, they can still detect glitches as narrow as 1 ns when utilizing peak detect.
Vertical Sensitivity: 2 mV/Div to 5 V/div (±2.0% ). Input Res./Capacitance: 1 M½±1% / ~9 pf or 50½ selectable. Time Base Range: 1 ns/div to 5 s/div. Modes:
Main, Delayed and XY. Cursors/Measurements: X, Y, DX, DY/14 automatic measurements. Other: Optional GPIB/IEEE, parallel interface and measurement storage
modules. 54616C has a color LCD.
Stock Mfr.Õs Sample Rate/ Record Trigger Glitch
Channels Bandwidth Warranty EACH
No. Type Real Time Length Modes Capture
835-0003 54610B 2 20 MSa/s 500 MHz 4 K Edge/Video 50 ns 3 years 4995.00
835-0004 54615B 2 1 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 5695.00
835-0005 54616B 2 2 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 6695.00
835-0006 54616C 2 2 GSa/s 500 MHz 5 K Edge/Video 1 ns 3 years 7695.00
16
Agilent
Technologies
HP 81101A 50 MHz Programmable Pulse Generator
c
1 MHz to 50 MHz Frequency Range
c
1 Channel
c
5 ns-200 ms Variable Transition Time
c
Up to 10 Vpp into 50 Ohms (20 Vpp into Open)
c
Fully SCPI Programmable
c
Graphical Display, Store/Recall Settings
c
Preset TTL/ECL Levels
c
3 Years Standard Warranty
c
8.9 cm High, Full Rack Width
The HP 81101A 50 MHz programmable pulse generator is a highly accurate one-channel pulse generator. It provides
clean, accurate pulses with excellent repeatability, and timing changes are free of glitches and drop outs, even at the
maximum frequency of 50 MHz. The pulse generator also features fast, variable transition time and flexible amplitude and
duty cycle.
This pulse generator generates all of the standard pulses needed to test current logic technologies (CMOS, TTL, ECL, etc).
You can save test settings and program the HP 81101A for automated test routines. In addition, the HP 81101As
programs can be used on other pulse/pattern generators in the HP 81100 family.
The HP 81101A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such
as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to
fully exploit the hardware limits. The User Interface includes warning messages, error messages, help key and non-volatile
memory for nine settings.
Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output
provides continuous pulses, double pulses or bursts (single or double pulses.) One input (BNC connector at rear panel) is
used for clock input or alternatively for PLL.
835-0102. 81101A............................................................................................................................................. EACH 6220.00
835Q0104. 81101A/UN2. Rear-panel connectors (instead of front) ................................................................EACH 6200.00
835-0105. 81101A/81104A OPT.1CP. Rack mount and handle kit ..................................................................EACH 87.00
835-0106. 81101A/81104A OPT.1CN. Handle kit .............................................................................................EACH 60.80
835-0107. 81101A/81104A OPT.1CM. Rack mount kit ....................................................................................EACH 39.47
835-0108. 81101A/81104A OPT.1CR. Rack slide kit
