10/27/2014Page1/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

PLC-INTERFACE, consisting of PLC-BSP.../21-21AU basic terminal block with spring-cage connection and plug-

in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 48 V DC

Product Features

 

Key commercial data

Packing unit 1 pc

Weight per Piece (excluding packing) 61.5 GRM

Custom tariff number 85364190

Country of origin Germany

Technical data

Utilization restriction EMC: class A product, see manufacturer's declaration in the download

10/27/2014Page2/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Coil side

Nominal input voltage UN48 V DC

Typical input current at UN20 mA

Typical response time 8 ms

Typical release time 10 ms

Operating voltage display Yellow LED

Protective circuit Protection against polarity reversal Polarity protection diode

Minimum switching voltage 100 mV (at 10 mA)

Maximum inrush current 50 mA

Min. switching current 1 mA (at 24 V)

Limiting continuous current 50 mA

Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC)

Note the following values are applicable if a gold layer is destroyed

Maximum switching voltage 250 V AC/DC

Minimum switching voltage 5 V AC/DC

Limiting continuous current 6 A

Maximum inrush current 15 A (300 ms)

1500 VA (for 250 V AC)

Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.2 A (at 250 V, DC13)

2 A (at 24 V, AC15)

10/27/2014Page3/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

Contact side

2 A (at 120 V, AC15)

2 A (at 250 V, AC15)

Operating mode 100% operating factor

Degree of protection RT III (Relay)

Mechanical service life 3 x 107 cycles

Inflammability class according to UL 94 V0

Designation Standards/regulations

Standards/regulations IEC 60664

Assembly instructions In rows with zero spacing

Connection data

Connection method Spring-cage connection

Stripping length 8 mm

Conductor cross section stranded min. 0.14 mm²

Conductor cross section stranded max. 2.5 mm²

Conductor cross section solid min. 0.14 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section AWG/kcmil max 14

Conductor cross section AWG/kcmil min. 26

eCl@ss 6.0 27371001

eCl@ss 7.0 27371001

eCl@ss 8.0 27371001

10/27/2014Page4/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

ETIM 2.0 EC000196

ETIM 3.0 EC000196

ETIM 4.0 EC000196

ETIM 5.0 EC000196

UNSPSC 6.01 30211916

UNSPSC 7.0901 39121515

UL Listed / cUL Listed / GL / UL Recognized / cUL Recognized / cULus Recognized / cULus Listed

Ex Approvals

Approvals submitted

Approval details

UL Listed

cUL Listed

10/27/2014Page5/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

UL Recognized

cUL Recognized

cULus Recognized

10/27/2014Page6/6

Relay Module-PLC-RSP- 48DC/21-21AU-2912594

Curve A

Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)

Curve B