Twist-Lock(R) Devices 30A, 125V AC, 2 Pole, 3 Wire Grounding Corrosion Resistant Insulgrip(R) Connector Features Ribbed nylon housing provides a secure grip and impact and chemical resistance. Superior cord grip design protects terminations from excess strain. Integral dust shield protects wiring chamber from dust or contaminants. Ordering Information Description Corrosion resistant, yellow nylon. Cord Diameter .360"-.930" (9-24) UPC 783585039091 Catalog Number HBL26CM13 Listings Listed to UL 498 Fed.Spec. W-C-596 Certified to CSA C22.2 No.42 Specifications Housing / Cord Clamp Terminal Retainer Contacts Terminal Screws Terminal Clamp Assembly Screws Nylon Clear polycarbonate Nickel Plated Brass #10-32 Bronze (Phillips / Slotted / Robertson) Cold rolled steel - nickel plated Steel - nickel plated Performance Electrical Current Interrupting Dielectric Voltage Certified for current interrupting at full rated current Withstands 2,000V minimum Mechanical Terminal Accommodation #16 AWG - #8 AWG stranded copper wire only. Terminal Identification Environmental Flammability Moisture Resistance Operating Temperatures Terminals identified in accordance with UL 498 HB or better per UL94 or CSA 22.2 No. 0.6 IP20 Suitability Maximum Continuous 75C Minimum -40C (w/o impact) Accessories Plug Weatherproof Boot Flanged Inlet Weatherproof Boot Resources Customer Use Drawing eCatalog Dimensions in Inches (mm) Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 40 Waterview Drive * Shelton, CT 06484 Phone (800) 288-6000 * Fax (800) 255-1031 * Specifications subject to change without notice. HBL26CM11 HBL60CM32 HBL2615 HBL60CM31