LM324MT - National Semiconductor

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D2-kV ESD Protection for:

− LM224K, LM224KA

− LM324K, LM324KA

− LM2902K, LM2902KV, LM2902KAV

DWide Supply Ranges

− Single Supply ...3 V to 32 V

(26 V for LM2902)

− Dual Supplies . . . +1.5 V to +16 V

(+13 V for LM2902)

DLow Supply-Current Drain Independent of

Supply Voltage . . . 0.8 mA Typ

DCommon-Mode Input Voltage Range

Includes Ground, Allowing Direct Sensing

Near Ground

DLow Input Bias and Offset Parameters

− Input Offset Voltage ...3 mV Typ

A Versions ...2 mV Typ

− Input Offset Current ...2 nA Typ

− Input Bias Current...20 nA Typ

A Versions . . . 15 nA Typ

DDifferential Input Voltage Range Equal to

Maximum-Rated Supply Voltage ...32 V

(26 V for LM2902)

DOpen-Loop Differential Voltage

Amplification . . . 100 V/mV Typ

DInternal Frequency Compensation

description/ordering information

These devices consist of four independent

high-gain frequency-compensated operational

amplifiers that are designed specifically to operate

from a single supply over a wide range of voltages.

Operation from split supplies also is possible if the

difference between the two supplies is 3 V to 32 V

(3 V to 26 V for the LM2902), and VCC is at least

1.5 V more positive than the input common-mode

voltage. The low supply-current drain is

independent of the magnitude of the supply

voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional

operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For

example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and

provides the required interface electronics, without requiring additional ±15-V supplies.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

1OUT

1IN−

1IN+

VCC

2IN+

2IN−

2OUT

4OUT

4IN−

4IN+

GND

3IN+

3IN−

3OUT

LM124 . . . D, J, OR W PACKAGE

LM124A ...J OR W PACKAGE

LM224, LM224A, LM224K, LM224KA ...D OR N PACKAGE

LM324, LM324K . . . D, N, NS, OR PW PACKAGE

LM324A . . . D, DB, N, NS, OR PW PACKAGE

LM324KA . . . D, N, NS, OR PW PACKAGE

LM2902 . . . D, N, NS, OR PW PACKAGE

LM2902K . . . D, DB, N, NS, OR PW PACKAGE

LM2902KV, LM2902KAV . . . D OR PW PACKAGE

(TOP VIEW)

3 2 1 20 19

910111213

4IN+

GND

3IN+

1IN+

VCC

2IN+

LM124, LM124A . . . FK PACKAGE

(TOP VIEW)

1IN−

1OUT

3IN− 4IN−

2IN−

2OUT

NC − No internal connection

3OUT 4OUT

On products compliant to MIL-PRF-38535, all parameters are

tested unless otherwise noted. On all other products,

production processing does not necessarily include testing

of all parameters.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

ORDERING INFORMATION{

VIOmax

AT 25°C

MAX

TESTED

VCC

PACKAGE}ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP (N)

Tube of 25

LM324N LM324N

PDIP (N) Tube of 25 LM324KN LM324KN

Tube of 50 LM324D

Reel of 2500 LM324DR LM324

SOIC (D) Reel of 2500 LM324DRG3

LM324

SOIC

(D)

Tube of 50 LM324KD

LM324K

7mV

30 V

Reel of 2500 LM324KDR LM324K

7 mV 30 V Reel of 2000 LM324NSR LM324

SOP (NS) Tube of 50 LM324KNS

LM324K

SOP

(NS)

Reel of 2000 LM324KNSR LM324K

Tube of 90 LM324PW

L324

TSSOP (PW)

Reel of 2000 LM324PWR L324

TSSOP (PW) Tube of 90 LM324KPW

L324K

0°Cto70°C

Reel of 2000 LM324KPWR L324K

0°C to 70°C

PDIP (N)

Tube of 25 LM324AN LM324AN

PDIP (N) Tube of 25 LM324KAN LM324KAN

Tube of 50 LM324AD

LM324A

SOIC (D)

Reel of 2500 LM324ADR LM324A

SOIC (D) Tube of 50 LM324KAD

LM324KA

Reel of 2500 LM324KADR LM324KA

3mV

30 V

Reel of 2000 LM324ANSR LM324A

3 mV 30 V SOP (NS) Tube of 50 LM324KANS

LM324KA

SOP

(NS)

Reel of 2000 LM324KANSR LM324KA

SSOP (DB) Reel of 2000 LM324ADBR LM324A

Tube of 90 LM324APW

L324A

TSSOP (PW)

Reel of 2000 LM324APWR L324A

TSSOP (PW) Tube of 90 LM324KAPW

L324KA

Reel of 2000 LM324KAPWR L324KA

PDIP (N)

Tube of 25

LM224N LM224N

PDIP (N) Tube of 25 LM224KN LM224KN

5mV

30 V

Tube of 50 LM224D

LM224

5 mV 30 V

SOIC (D)

Reel of 2500 LM224DR LM224

SOIC (D) Tube of 50 LM224KD

LM224K

25°Cto85°C

Reel of 2500 LM224KDR LM224K

−25°C to 85°C

PDIP (N)

Tube of 25 LM224AN LM224AN

PDIP (N) Tube of 25 LM224KAN LM224KAN

3mV

30 V

Tube of 50 LM224AD

LM224A

3 mV 30 V

SOIC (D)

Reel of 2500 LM224ADR LM224A

SOIC (D) Tube of 50 LM224KAD

LM224KA

Reel of 2500 LM224KADR LM224KA

†For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

‡Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

ORDERING INFORMATION (CONTINUED)

VIOmax

AT 25°C

MAX

TESTED

VCC

PACKAGE†ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP (N)

Tube of 25 LM2902N LM2902N

PDIP (N) Tube of 25 LM2902KN LM2902KN

Tube of 50 LM2902D

LM2902

SOIC (D)

Reel of 2500 LM2902DR LM2902

SOIC (D) Tube of 50 LM2902KD

LM2902K

Reel of 2500 LM2902KDR LM2902K

Reel of 2000 LM2902NSR LM2902

26 V SOP (NS) Tube of 50 LM2902KNS

LM2902K

7 mV

SOP

(NS)

Reel of 2000 LM2902KNSR LM2902K

−40°C to 125°C

SSOP (DB)

Tube of 80 LM2902KDB

L2902K

40 C

125 C

SSOP (DB) Reel of 2000 LM2902KDBR L2902K

Tube of 90 LM2902PW

L2902

TSSOP (PW)

Reel of 2000 LM2902PWR L2902

TSSOP (PW) Tube of 90 LM2902KPW

L2902K

Reel of 2000 LM2902KPWR L2902K

32 V

SOIC (D) Reel of 2500 LM2902KVQDR L2902KV

32 V TSSOP (PW) Reel of 2000 LM2902KVQPWR L2902KV

2mV

32 V

SOIC (D) Reel of 2500 LM2902KAVQDR L2902KA

2 mV 32 V TSSOP (PW) Reel of 2000 LM2902KAVQPWR L2902KA

CDIP (J) Tube of 25 LM124J LM124J

CFP (W) Tube of 25 LM124W LM124W

5 mV 30 V LCCC (FK) Tube of 55 LM124FK LM124FK

55°C to 125°C

SOIC (D)

Tube of 50 LM124D

LM124

−55°C to 125°CSOIC (D) Reel of 2500 LM124DR LM124

CDIP (J) Tube of 25 LM124AJ LM124AJ

2 mV 30 V CFP (W) Tube of 25 LM124AW LM124AW

LCCC (FK) Tube of 55 LM124AFK LM124AFK

†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

symbol (each amplifier)

−

IN−

IN+

OUT

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

schematic (each amplifier)

To Other

Amplifiers

≈6-µA

Current

Regulator

VCC

OUT

GND

IN−

IN+

≈100-µA

Current

Regulator

≈50-µA

Current

Regulator

COMPONENT COUNT

(total device)

Epi-FET

Transistors

Diodes

Resistors

Capacitors

≈6-µA

Current

Regulator

†ESD protection cells - available on LM324K and LM324KA only

†

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

LM2902 ALL OTHER

DEVICES UNIT

Supply voltage, VCC (see Note 1) ±13 or 26 ±16 or 32 V

Differential input voltage, VID (see Note 2) ±26 ±32 V

Input voltage, VI (either input) −0.3 to 26 −0.3 to 32 V

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,

VCC ≤ 15 V (see Note 3) Unlimited Unlimited

D package 86 86

DB package 96 96

Package thermal impedance, θJA (see Notes 4 and 5) N package 80 80 °C/W

Package

thermal

impedance,

θJA

(see

Notes

and

NS package 76 76

C/W

PW package 113 113

FK package 5.61

Package thermal impedance, qJC (see Notes 6 and 7) J package 15.05 °C/W

Package

thermal

impedance,

qJC

(see

Notes

and

W package 14.65

C/W

Operating virtual junction temperature, TJ150 150 °C

Case temperature for 60 seconds FK package 260 °C

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 300 °C

Storage temperature range, Tstg −65 to 150 −65 to 150 °C

†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

2. Differential voltages are at IN+, with respect to IN−.

3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

5. The package thermal impedance is calculated in accordance with JESD 51-7.

6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

7. The package thermal impedance is calculated in accordance with MIL-STD-883.

ESD protection

TEST CONDITIONS TYP UNIT

Human-Body Model LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV ±2 kV

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS†T

‡

LM124

LM224

LM324

LM324K UNIT

PARAMETER

TEST

CONDITIONS†

TA‡

MIN TYP §MAX MIN TYP §MAX

UNIT

Input offset voltage

= 5 V to MAX

25°C 3 5 3 7

VIO Input offset voltage

CC =

MAX

VIC = VICRmin, VO = 1.4 V Full range 7 9 mV

Input offset current

V14V

25°C 2 30 2 50

IIO Input offset current VO = 1.4 V Full range 100 150 nA

Input bias current

V14V

25°C −20 −150 −20 −250

IIB Input bias current VO = 1.4 V Full range −300 −500 nA

25°C

0 to 0 to

Common-mode

V5VtoMAX

25°C

VCC − 1.5

VICR

Common

mode

input voltage range VCC = 5 V to MAX

Full range

0 to 0 to V

input

voltage

range

Full range

VCC − 2

RL = 2 kΩ25°C VCC − 1.5 VCC − 1.5

h-level RL = 10 kΩ25°C

VOH

High

level

output voltage

VMAX

RL = 2 kΩFull range 26 26 V

VCC = MAX RL ≥ 10 kΩFull range 27 28 27 28

VOL

Low-level

output voltage RL ≤ 10 kΩFull range 5 20 5 20 mV

Large-signal

differential voltage

= 15 V

= 1 V to 11 V

25°C 50 100 25 100

V/mV

AVD differential voltage

amplification

CC =

O =

RL ≥ 2 kΩFull range 25 15

V/mV

CMRR Common-mode

rejection ratio VIC = VICRmin 25°C 70 80 65 80 dB

Supply-voltage

rejection ratio

25°C

100

kSVR rejection ratio

(∆VCC /∆VIO)

25°C 65 100 65 100 dB

VO1/V

Crosstalk

attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB

VCC = 15 V,

V1V

Source

25°C −20 −30 −60 −20 −30 −60

VID = 1 V,

VO = 0

Source

Full range −10 −10

IOOutput current VCC = 15 V,

V1V

Sink

25°C 10 20 10 20

VID = −1 V,

VO = 15 V

Sink

Full range 5 5

VID = −1 V, VO = 200 mV 25°C 12 30 12 30 µA

IOS

Short-circuit

output current

VCC at 5 V,

GND at −5 V

VO = 0, 25°C±40 ±60 ±40 ±60 mA

Supply current

VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2

ICC

Supply current

(four amplifiers) VCC = MAX,

VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for

testing purposes is 26 V for LM2902 and 30 V for the others.

‡Full range is −55°C to 125°C for LM124, −25°C to 85°C for LM224, and 0°C to 70°C for LM324.

§All typical values are at TA = 25°C.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS†

T‡

LM2902 LM2902V

UNIT

PARAMETER TEST CONDITIONS†TA‡

MIN TYP §MAX MIN TYP §MAX UNIT

V5Vt

Non-A-suffix 25°C 3 7 3 7

Input offset voltage

VCC = 5 V to

MAX

Non

suffix

devices Full range 10 10

VIO Input offset voltage

MAX

VIC = VICRmin,

V14V

A-suffix 25°C 1 2 mV

IC ICR

VO = 1.4 V

suffix

devices Full range 4

∆VIO/∆TInput offset voltage

temperature drift RS = 0 ΩFull range 7µV/°C

Input offset current

V14V

25°C 2 50 2 50

IIO Input offset current VO = 1.4 V Full range 300 150 nA

∆IIO/∆TInput offset current

temperature drift Full range 10 pA/°C

Input bias current

V14V

25°C −20 −250 −20 −250

IIB Input bias current VO = 1.4 V Full range −500 −500 nA

25°C

0 to 0 to

Common-mode

V5VtoMAX

25°C

VCC − 1.5

VICR

Common

mode

input voltage range VCC = 5 V to MAX

Full range

0 to 0 to V

input

voltage

range

Full range

VCC − 2

RL = 2 kΩ25°C

h-level RL = 10 kΩ25°C VCC − 1.5 VCC − 1.5

VOH

High

level

output voltage

VMAX

RL = 2 kΩFull range 22 26 V

VCC = MAX RL ≥ 10 kΩFull range 23 24 27

VOL

Low-level

output voltage RL ≤ 10 kΩFull range 5 20 5 20 mV

Large-signal

differential voltage

= 15 V

= 1 V to 11 V

25°C 25 100 25 100

V/mV

AVD differential voltage

amplification

CC =

O =

RL ≥ 2 kΩFull range 15 15

V/mV

CMRR Common-mode

rejection ratio VIC = VICRmin 25°C 50 80 60 80 dB

Supply-voltage

rejection ratio

25°C

100

kSVR rejection ratio

(∆VCC /∆VIO)

25°C 50 100 60 100 dB

VO1/V

Crosstalk

attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB

VCC = 15 V,

V1V

25°C −20 −30 −60 −20 −30 −60

VID = 1 V,

VO = 0

Source Full range −10 −10

IOOutput current VCC = 15 V,

V1V

Sink

25°C 10 20 10 20

VID = −1 V,

VO = 15 V

Sink

Full range 5 5

VID = −1 V, VO = 200 mV 25°C 30 12 40 µA

IOS

Short-circuit

output current

VCC at 5 V,

GND at −5 V

VO = 0, 25°C±40 ±60 ±40 ±60 mA

Supply current

VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2

ICC

Supply current

(four amplifiers) VCC = MAX,

VO = 0.5 VCC, No load Full range 1.4 3 1.4 3 mA

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for

testing purposes is 26 V for LM2902 and 32 V for LM2902V.

‡Full range is −40°C to 125°C for LM2902.

§All typical values are at TA = 25°C.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − MARCH 2010

8POST OFFICE BOX 655303 DALLAS, TEXAS 75265

•

electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS†T

‡LM124A LM224A LM324A,

LM324KA UNIT

PARAMETER

TEST

CONDITIONS†

‡

MIN TYP §MAX MIN TYP §MAX MIN TYP §MAX

UNIT

Input offset voltage

= 5 V to 30 V, 25°C 2 2 3 2 3

VIO Input offset voltage

VCC

VIC = VICRmin, VO = 1.4 V Full range 445mV

Input offset current

V14V

25°C 10 2 15 2 30

IIO Input offset current VO = 1.4 V Full range 30 30 75 nA

Input bias current

V14V

25°C −50 −15 −80 −15 −100

IIB Input bias current VO = 1.4 V Full range −100 −100 −200 nA

Common-mode input

V30 V

25°C0 to

VCC − 1.5

0 to

VCC − 1.5

0 to

VCC − 1.5

VICR

Common-mode

input

voltage range VCC = 30 V

Full range 0 to

VCC − 2

0 to

VCC − 2

0 to

VCC − 2

RL = 2 kΩ25°C VCC − 1.5 VCC − 1.5 VCC − 1.5

VOH High-level output voltage

V30 V

RL = 2 kΩFull range 26 26 26 V

VOH

High level

output

voltage

VCC = 30 V RL ≥ 10 kΩFull range 27 27 28 27 28

VOL Low-level output voltage RL ≤ 10 kΩFull range 20 5 20 5 20 mV

Lar

e-si

nal differential V

= 15 V, V

= 1 V to 11 V, 25°C 50 100 50 100 25 100

V/mV

AVD

Large-signal

differential

voltage amplification

VCC

RL ≥2 kΩFull range 25 25 15 V/mV

CMRR Common-mode rejection ratio VIC = VICRmin 25°C 70 70 80 65 80 dB

kSVR

Supply-voltage rejection ratio

(∆VCC /∆VIO)25°C 65 65 100 65 100 dB

VO1/V

O2 Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 120 120 dB

VCC = 15 V,

V1V

Source 25°C −20 −20 −30 −60 −20 −30 −60

VID = 1 V,

VO = 0

Source

Full range −10 −10 −10

IOOutput current VCC = 15 V,

V1V

Sink

25°C 10 10 20 10 20

VID = −1 V,

VO = 15 V

Sink

Full range 5 5 5

VID = −1 V, VO = 200 mV 25°C 12 12 30 12 30 µA

IOS Short-circuit output current VCC at 5 V, GND at −5 V,

VO = 0 25°C±40 ±60 ±40 ±60 ±40 ±60 mA

Supply current

VO = 2.5 V, No load Full range 0.7 1.2 0.7 1.2 0.7 1.2

ICC

Supply current

(four amplifiers) VCC = 30 V, VO = 15 V,

No load Full range 1.4 3 1.4 3 1.4 3 mA

†All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.

‡Full range is −55°C to 125°C for LM124A, −25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.

§All typical values are at TA = 25°C.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066T − SEPTEMBER 1975 − REVISED MARCH 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

operating conditions, VCC = ±15 V, TA = 25°C

PARAMETER TEST CONDITIONS TYP UNIT

SR Slew rate at unity gain RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1) 0.5 V/µs

B1Unity-gain bandwidth RL = 1 MΩ, CL = 20 pF (see Figure 1) 1.2 MHz

VnEquivalent input noise voltage RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2) 35 nV/√Hz

−

VCC+

VCC−

Figure 1. Unity-Gain Amplifier

−

100 Ω

VCC+

VCC−

900 Ω

VI = 0 V

Figure 2. Noise-Test Circuit

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

5962-7704301VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

5962-9950403V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type

5962-9950403VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

77043012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI

7704301CA ACTIVE CDIP J 14 1 TBD Call TI Call TI

7704301DA ACTIVE CFP W 14 1 TBD Call TI Call TI

77043022A ACTIVE LCCC FK 20 1 TBD Call TI Call TI

7704302CA ACTIVE CDIP J 14 1 TBD Call TI Call TI

7704302DA ACTIVE CFP W 14 1 TBD Call TI Call TI

JM38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

LM124ADR OBSOLETE SOIC D 14 TBD Call TI Call TI

LM124AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type

LM124AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

LM124AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

LM124AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type

LM124D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM124DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type

LM124J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

LM124JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

LM124N OBSOLETE PDIP N 14 TBD Call TI Call TI

LM124W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type

LM124WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type

LM224AD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 2

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM224ADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224ADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM

LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KAD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 3

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224KANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224KD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KDE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KDG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM224KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM224NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM2902D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM

LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 4

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM2902KAVQDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDBE4 ACTIVE SSOP DB 14 80 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDBG4 ACTIVE SSOP DB 14 80 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM2902KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 5

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KVQDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902NSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI

LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902PWRE4 ACTIVE TSSOP PW 14 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 6

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM2902PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM

LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM2902QN OBSOLETE PDIP N 14 TBD Call TI Call TI

LM324AD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI

LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324ANSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324APW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 7

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM324APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324APWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI

LM324APWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324D ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324DE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324DG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324DR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324DRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324DRG3 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM

LM324DRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KADE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KADG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KADR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KADRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 8

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM324KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324KANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324KANSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KANSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KANSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KAPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KD ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KDE4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KDG4 ACTIVE SOIC D 14 50 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KDR ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KDRE4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 9

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM324KNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324KNSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KNSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324NE3 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU SN N / A for Pkg Type

LM324NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type

LM324NSR ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324NSRE4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324NSRG4 ACTIVE SO NS 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PW ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 10

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

LM324PWR ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU SN Level-1-260C-UNLIM

LM324PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM

LM324Y OBSOLETE DIESALE Y 0 TBD Call TI Call TI

M38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM124, LM124-SP, LM124M, LM2902 :

PACKAGE OPTION ADDENDUM

www.ti.com 28-Aug-2012

Addendum-Page 11

•Catalog: LM124, LM124

•Automotive: LM2902-Q1

•Enhanced Product: LM2902-EP

•Military: LM124M, LM124M

•Space: LM124-SP, LM124-SP

NOTE: Qualified Version Definitions:

•Catalog - TI's standard catalog product

•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

•Enhanced Product - Supports Defense, Aerospace and Medical Applications

•Military - QML certified for Military and Defense Applications

•Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LM124DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM224ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM224DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM224DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM224KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM224KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2902DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2902DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2902KAVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2902KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM2902KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM2902KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2902KVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2902NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM2902PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

Pack Materials-Page 1

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LM2902PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM2902PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM2902PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1

LM324ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324ADRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM324APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324APWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM324APWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324KADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324KANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM324KAPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324KDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1

LM324KNSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM324KPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1

LM324PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM324PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

LM324PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1

LM324PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1

PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

Pack Materials-Page 2

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM124DR SOIC D 14 2500 367.0 367.0 38.0

LM224ADR SOIC D 14 2500 367.0 367.0 38.0

LM224ADR SOIC D 14 2500 333.2 345.9 28.6

LM224DR SOIC D 14 2500 367.0 367.0 38.0

LM224DRG4 SOIC D 14 2500 367.0 367.0 38.0

LM224KADR SOIC D 14 2500 367.0 367.0 38.0

LM224KDR SOIC D 14 2500 367.0 367.0 38.0

LM2902DR SOIC D 14 2500 333.2 345.9 28.6

LM2902DR SOIC D 14 2500 367.0 367.0 38.0

LM2902DRG4 SOIC D 14 2500 333.2 345.9 28.6

LM2902DRG4 SOIC D 14 2500 367.0 367.0 38.0

LM2902KAVQPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2902KDR SOIC D 14 2500 367.0 367.0 38.0

LM2902KNSR SO NS 14 2000 367.0 367.0 38.0

LM2902KPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2902KVQPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2902NSR SO NS 14 2000 367.0 367.0 38.0

LM2902PWR TSSOP PW 14 2000 364.0 364.0 27.0

LM2902PWR TSSOP PW 14 2000 367.0 367.0 35.0

LM2902PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0

PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

Pack Materials-Page 3

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM2902PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

LM324ADBR SSOP DB 14 2000 367.0 367.0 38.0

LM324ADR SOIC D 14 2500 367.0 367.0 38.0

LM324ADRG4 SOIC D 14 2500 367.0 367.0 38.0

LM324ANSR SO NS 14 2000 367.0 367.0 38.0

LM324APWR TSSOP PW 14 2000 367.0 367.0 35.0

LM324APWR TSSOP PW 14 2000 364.0 364.0 27.0

LM324APWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

LM324DR SOIC D 14 2500 333.2 345.9 28.6

LM324DR SOIC D 14 2500 367.0 367.0 38.0

LM324DRG4 SOIC D 14 2500 333.2 345.9 28.6

LM324DRG4 SOIC D 14 2500 367.0 367.0 38.0

LM324KADR SOIC D 14 2500 367.0 367.0 38.0

LM324KANSR SO NS 14 2000 367.0 367.0 38.0

LM324KAPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM324KDR SOIC D 14 2500 367.0 367.0 38.0

LM324KNSR SO NS 14 2000 367.0 367.0 38.0

LM324KPWR TSSOP PW 14 2000 367.0 367.0 35.0

LM324NSR SO NS 14 2000 367.0 367.0 38.0

LM324PWR TSSOP PW 14 2000 364.0 364.0 27.0

LM324PWR TSSOP PW 14 2000 367.0 367.0 35.0

LM324PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0

LM324PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 14-Jul-2012

Pack Materials-Page 4

MECHANICAL DATA

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE

4040065 /E 12/01

28 PINS SHOWN

Gage Plane

8,20

7,40

0,55

0,95

0,25

12,90

12,30

10,50

8,50

Seating Plane

9,907,90

10,50

9,90

0,38

5,60

5,00

0,22

2016

6,50

0,05 MIN

5,905,90

DIM

A MAX

A MIN

PINS **

2,00 MAX

6,90

7,50

0,65 M

0,15

0°–ā8°

0,10

0,09

0,25

NOTES: A. All linear dimensions are in millimeters.

B. This drawing is subject to change without notice.

C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.

D. Falls within JEDEC MO-150

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which

have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such

components to meet such requirements.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265