95420-11 - Peregrine Semiconductor Corp.

Page 1 of 11

The PE95420 is an RF SPDT (single pole double throw) switch

and is available in a hermetically sealed ceramic package. The

PE95420 is designed to cover a broad range of applications

from 1 to 8500 MHz for use in various Hi-Rel industries and

applications requiring broadband performance. It uses

Peregrine’s UltraCMOS™ process and features HaRP™

technology enhancements to deliver high linearity and

exceptional harmonics performance. HaRP technology is an

innovative feature of the UltraCMOS™ process providing

upgraded linearity performance.

The PE95420 is an absorptive/non-reflective switch design

which is an ideal termination method for RF elements in a

system design. A single-pin 3.3V CMOS logic control in a

single chip solution reduces the number of control lines.

Product Specification

RF SPDT Switch

Hermetically sealed ceramic package

1 – 8500 MHz

Product Description

Figure 1. Functional Diagram

PE95420

Features

• HaRP™-Technology-Enhanced

•

Eliminates Gate and Phase Lag

•

No Insertion Loss or Phase Drift

•

High Linearity: 60 dBm IIP3

•

Low Insertion Loss:

•

0.77 dB at 100 MHz

•

1.0 dB at 3000 MHz

•

1.15 dB at 6000 MHz

•

1.38 dB at 8500 MHz

•

High Isolation (RF1-RF2)

•

86.5 dB at 100 MHz

•

48.2 dB at 3000 MHz

•

36.6 dB at 6000 MHz

•

27.8 dB at 8500 MHz

•

Fast Switching Time

•

700 ns RF ON

•

300 ns RF OFF

•

Ultra-Low Power Consumption

•

3.3 µW @ 3.3 V

•

1 dB Compression Point of +33 dBm

•

Single-pin 3.3 V CMOS logic control

•

ESD tolerant to 2000 V HBM

•

Absorptive/Non-Reflective

•

Offered in a 7-lead Hermetic CSOIC

Surface-Mount Package and in DIE form

Figure 2. Package Type

7-lead CSOIC

•

Medical

•

Automotive

•

Telecom Infrastructure

•

Test Instrumentation

•

Down-hole oil/gas

•

Military

•

Commercial space applications

Typical Industries

RF1 RF2

CTRLLS

RFC

50Ω50Ω

CMOS Control

Driver

ESD ESD

V

DD

V

SS

Product Specification

PE95420

Page 2 of 11

Table 1. Electrical Specifications @ -40°C ≤ T ≤ 85°C & 3.0V ≤ VDD ≤ 3.6V

Parameter Conditions Min Typical Max Units

Operational Frequency 1 8500 MHz

Insertion Loss

100 MHz 0.77 0.95 dB

3000 MHz 1 1.28 dB

6000 MHz 1.15 1.42 dB

8500 MHz 1.38 1.72 dB

Isolation – RFC to RF1

100 MHz 74 75.6 dB

3000 MHz 46 47.4 dB

6000 MHz 43.8 48 dB

8500 MHz (note 2) 31 38 dB

Isolation – RFC to RF2

100 MHz 73.7 75.4 dB

3000 MHz 46.8 48.3 dB

6000 MHz 45 52.1 dB

8500 MHz (note 2) 31 38 dB

Isolation – RF1 to RF2

100 MHz 86.5 dB

3000 MHz 48.2 dB

6000 MHz 36.6 dB

8500 MHz 27.8 dB

Return Loss Active Port – ON State

100 MHz 21 dB

3000 MHz 33 dB

6000 MHz 20 dB

8500 MHz 15 dB

Return Loss Active Port – OFF State

100 MHz 20 dB

3000 MHz 18 dB

6000 MHz 15 dB

8500 MHz 8 dB

Input 1 dB Compression (note 1) 8500 MHz 33 dBm

Input IP3 8500 MHz, 18 dBm input power/tone 60 dBm

Switching Time

50% CTRL to 90% of final value when RF ON 700 ns

50% CTRL to 10% of final value when RF OFF 300 ns

Note: 1. Please note Maximum Operating Pin (50Ω) of +24dBm in Table 3.

2. Guaranteed but not tested

Product Specification

PE95420

Page 3 of 11

Table 2. Pin Descriptions

Figure 3. Pin Layout (Top View)

Pin No. Pin Name Description

1 RFC

1

RF Common

2 RF1

1

RF Port 1

3 V

DD

Nominal 3.3 V supply connection

4 LS Selects the RF1 to RFC path

(See Table 6)

5 CTRL Selects the RF2 to RFC path

(See Table 6)

6 V

SS

Negative power supply. Apply nominal

–3.3 V supply

7 RF2

1

RF Port 2

paddle GND Exposed Solder Pad, grounded for

proper device operation.

RFC

RF1 RF2

LSV

DD

V

SS

CTRL

Pin 1

Pin 2

Pin 3

Pin 7

456

exposed solder pad

Note 1: All RF pins must be DC blocked with an external series

capacitor or held at 0 Vdc.

Electrostatic Discharge (ESD) Precautions

When handling this UltraCMOS™ device, observe the

same precautions that you would use with other ESD-

sensitive devices. Although this device contains

circuitry to protect it from damage due to ESD,

precautions should be taken to avoid exceeding the

rate specified.

Exposed Solder Pad Connection

The exposed solder pad on the bottom of the package

must be grounded for proper device operation.

Latch-Up Avoidance

Unlike conventional CMOS devices, UltraCMOS™

devices are immune to latch-up.

Switching Frequency

The PE95420 has a maximum 25 kHz switching rate.

Table 6. Truth Table

Table 5. Absolute Maximum Ratings

Table 3. Operating Ranges

Exceeding absolute maximum ratings may cause

permanent damage. Operation should be restricted to

the limits in the Operating Ranges table. Operation

between operating range maximum and absolute

maximum for extended periods may reduce reliability.

Symbol Parameter/Conditions Min Max Units

V

DD

Power supply voltage -0.3 4.0 V

V

C1

Voltage on LS input -0.3 V

DD

+

0.3 V

V

C2

Voltage on CTRL input -0.3 V

DD

+

0.3 V

T

ST

Storage temperature range -65 150 °C

V

ESD

ESD voltage (Human Body

Model) 2000 V

Θ

JC

Theta JC 24 °C/W

Parameter Min Typ Max Units

V

DD

Positive Power Supply

Voltage 3.0 3.3 3.6 V

V

SS

Negative Power Supply

Voltage -3.6 -3.3 -3.0 V

I

DD

Power Supply Current

(V

DD

= 3.3V, LS or CTRL = 3.3V)

< 1 µA

Control Voltage High 0.7xV

DD

V

Control Voltage Low 0.3xV

DD

V

RF Power In (50Ω):

1 MHz ≤ 8.5 GHz

24

dBm

Operating temperature range -40 85 °C

I

SS

Power Supply Current

(V

SS

= -3.3V)

< 1 µA

LS CTRL RFC-RF1 RFC-RF2 Logic State

0 0 off off OFF state

0 1 off on RF2 active

1 0 on off RF1 active

1 1 N/A* N/A* N/A*

* Invalid state that should not be used for normal operation.

Table 4. Post Radiation Table

Total Dose Parameter Min Max Units

Post**

20krad

I

DD

Positive Supply Current 100 µA

I

SS

Negative Supply Current -500 µA

Post 100krad I

DD

Positive Supply Current 0.5 mA

I

SS

Negative Supply Current -5 mA

**Characterized but not tested

Product Specification

PE95420

Page 4 of 11

Performance Plots

Figure 4. Insertion Loss: RF1 @ 3.3 V Figure 5. Insertion Loss: RF1 @ 25 °C

Figure 6. Insertion Loss: RF2 @ 3.3 V Figure 7. Insertion Loss: RF2 @ 25 °C

Product Specification

PE95420

Page 5 of 11

Figure 8. Isolation: RF1-RF2, RF1 Active

@ V

DD

= 3.3V

Performance Plots

Figure 12. Isolation: RFC-RF1, RF2 Active

@ V

DD

= 3.3V

Figure 13. Isolation: RFC-RF2, RF1 Active

@ V

DD

= 3.3V

Figure 9. Isolation: RF2-RF1, RF2 Active

@ V

DD

= 3.3V

Figure 10. Isolation: RF1-RF2, RF1 Active @ 25°C Figure 11. Isolation: RF2-RF1, RF2 Active @ 25°C

Product Specification

PE95420

Page 6 of 11

Figure 17. Isolation: RFC-RF2, OFF state

@ V

DD

= 3.3V

Figure 16. Isolation: RFC-RF1, OFF state

@ V

DD

= 3.3V

Performance Plots

Figure 14. Isolation: RFC-RF1, RF2 Active @ 25°C Figure 15. Isolation: RFC-RF2, RF1 Active @ 25°C

Figure 19. Isolation: RFC-RF2, OFF state @ 25°C Figure 18. Isolation: RFC-RF1, OFF state @ 25°C

Product Specification

PE95420

Page 7 of 11

Performance Plots

Figure 20. Return Loss: RF1 @ V

DD

= 3.3V Figure 21. Return Loss: RF2 @ V

DD

= 3.3V

Figure 23. Return Loss: RF2 @ 25°C Figure 22. Return Loss: RF1 @ 25°C

Product Specification

PE95420

Page 8 of 11

Figure 25. Evaluation Kit Schematic

Peregrine Specification 102-0417

Figure 24. Evaluation Board Layout

Peregrine Specification 101-0345 The SPDT switch EK Board was designed to ease

customer evaluation of Peregrine’s PE95420. The RF

common port is connected through a 50 Ω transmission

line via the top SMA connector, J1. RF1 and RF2 are

connected through 50 Ω transmission lines via SMA

connectors J2 and J3, respectively. A through 50 Ω

transmission is available via SMA connectors J5 and

J6. This transmission line can be used to estimate the

loss of the PCB over the environmental conditions

being evaluated.

The evaluation kit board is constructed of four metal

layers. The dual clad top RF layer is Rogers RO4003

material with an 8 mil RF core and er = 3.55. The other

two dielectric layers are FR4 for DC control and overall

board strength with an cumulative board thickness of

62 mils. The RF transmission lines were designed

using a Grounded co-planar waveguide with a linewidth

of 15 mils and gap of 7 mils.

Evaluation Board

Through Line

THERMAL SLUG

SOCKET MOUNTING HOLE

1

2

J5

142-0761-881/891

1

2

J

1

142 -0761 -881 /89

1

2

J3

142-0761-881/891

1

13

35

57

7

22

44

66

88

10 10

12 12

14 14 13

13

9

911

11

J4

HEADER 14

1

2

J2

142-0761-881/891

C1

22pF

C2

22pF

C3

22pF

1

2

J6

142-0761-881/891

R1

DNI

C4

22pF

2RF1

3VDD

4LS

5CTRL

6VSS

7

RF2

1

RFC

8

GND

9

10

11

12

U1

PE95420

RFC

RF2RF1

VSS

CTRL

VDD

LS

VDD

CTR

LS

Product Specification

PE95420

Page 9 of 11

Figure 26. Package Drawing

7-lead CSOIC

Product Specification

PE95420

Page 10 of 11

Table 7. Ordering Information

Order Code Part Marking Description Package Shipping Method

95420-01 95420-01 PE95420-7CSOIC-50B Engineering Samples 7-lead CSOIC 50 Count Trays

95420-11 95420-11 PE95420-7CSOIC-50B Production Units 7-lead CSOIC 50 Count Trays

95420-00 PE95420-EK PE95420 Evaluation Kit Evaluation Board 1 / Box

95420-99 Production Die Die 400 Units/Waffle Pack

95420-XX= Part number e.g. 95420-11

XX will be specified by the PO and/or the Assembly Instructions

YYWW= Date Code-Last 2 digits of the year and work week

XXXXX = Lot Code

ZZZZZ = Serial Number

.

= Pin 1 mark

Figure 27. Top Marking

ZZZZZ

Product Specification

PE95420

Page 11 of 11

Sales Offices

The Americas

Peregrine Semiconductor Corporation

9380 Carroll Park Drive

San Diego, CA 92121

Tel: 858-731-9400

Fax: 858-731-9499

Europe

Peregrine Semiconductor Europe

Bâtiment Maine

13-15 rue des Quatre Vents

F-92380 Garches, France

Tel: +33-1-4741-9173

Fax : +33-1-4741-9173

For a list of representatives in your area, please refer to our

Web site at: www.psemi.com

Data Sheet Identification

Advance Information

The product is in a formative or design stage. The data

sheet contains design target specifications for product

development. Specifications and features may change in

any manner without notice.

Preliminary Specification

The data sheet contains preliminary data. Additional data

may be added at a later date. Peregrine reserves the right

to change specifications at any time without notice in order

to supply the best possible product.

Product Specification

The data sheet contains final data. In the event Peregrine

decides to change the specifications, Peregrine will notify

customers of the intended changes by issuing a CNF

(Customer Notification Form).

The information in this data sheet is believed to be reliable.

However, Peregrine assumes no liability for the use of this

information. Use shall be entirely at the user’s own risk.

No patent rights or licenses to any circuits described in this

data sheet are implied or granted to any third party.

Peregrine’s products are not designed or intended for use in

devices or systems intended for surgical implant, or in other

applications intended to support or sustain life, or in any

application in which the failure of the Peregrine product could

create a situation in which personal injury or death might occur.

Peregrine assumes no liability for damages, including

consequential or incidental damages, arising out of the use of

its products in such applications.

The Peregrine name, logo, and UTSi are registered trademarks

and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks

of Peregrine Semiconductor Corp.

High-Reliability and Defense Products

Americas

San Diego, CA, USA

Phone: 858-731-9475

Fax: 848-731-9499

Europe/Asia-Pacific

Parc Cezanne 1

380 Avenue Archimède, Parc de la Duranne

13857 Aix-En-Provence Cedex 3, France

Phone: +33-4-4239-3361

Fax: +33-4-4239-7227

Peregrine Semiconductor, Asia Pacific (APAC)

Shanghai, 200040, P.R. China

Tel: +86-21-5836-8276

Fax: +86-21-5836-7652

Peregrine Semiconductor, Korea

#B-2607, Kolon Tripolis, 210

Geumgok-dong, Bundang-gu, Seongnam-si

Gyeonggi-do, 463-943 South Korea

Tel: +82-31-728-3939

Fax: +82-31-728-3940

Peregrine Semiconductor K.K., Japan

Teikoku Hotel Tower 10B-6

1-1-1 Uchisaiwai-cho, Chiyoda-ku

Tokyo 100-0011 Japan

Tel: +81-3-3502-5211

Fax: +81-3-3502-5213