Part Number 854923 140 MHz SAW Filter Data Sheet Features * * * * * * * * For Broadband applications Usable bandwidth of 22 MHz Typical 3 dB bandwidth of 23.16 MHz Low loss Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.75 mm SMP-53 Bottom View 1 1.75 NOM. 1.96 MAX. 0.76 2 3 4 12 5 11 6 13.3 10 9 8 7 2.54 Single-ended Configuration Pin No. Description 11 Input 5 Output 6,12 Ground 1,2,3,4 CaseGround 7,8,9,10 Case Ground 2.18 6.50 2.54 1.17 x 3.76 0.79 1.50 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev - 10/07 (c) TriQuint Semiconductor Page 1 of 5 Part Number 854923 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Center Frequency Insertion Loss at Center Frequency 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Ripple 130.44 - 149.56 MHz Phase Linearity 130.44 - 149.56 MHz Group Delay Variation 130.44 - 149.56 MHz Absolute Delay Temperature Coefficient Source Impedance (single-ended) (5) Load Impedance (single-ended) (5) Minimum Typical (4) Maximum Unit 139.6 22 23.9 - 140 11.33 23.16 24.26 28.85 140.4 13 33.5 MHz dB MHz MHz MHz - 0.56 1 dB p-p - 6.1 14 p-p - 34 0.8 -94 50 50 100 - ns p-p nsec ppm/C Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 100nH 120nH 5 11 50 Single-ended Input 50 Subject to change or obsolescence without notice 15pF 15pF 1,2,3,4,6 7,8,9,10,12 Rev - 10/07 50 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 854923 140 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev - 10/07 (c) TriQuint Semiconductor Page 3 of 5 Part Number 854923 140 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 100nH 120nH 5 11 50 Single-ended Input 15pF 50 15pF 1,2,3,4,6 7,8,9,10,12 Marking 50 Single-ended Output 50 PCB Footprint 13.51 1.70 3.53 SAWTEK 854923 XXXXXX 6.70 .99 ID Dot .99 Date Code 1.55 1.70 8.61 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 O330 0.3 4.0 2.0 O1.5 A 1.75 11.5 13.9 24 Direction of travel O102 O20.2 O13.0 2.0 2.3 Section A-A 7.1 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev - 10/07 (c) TriQuint Semiconductor Page 4 of 5 Part Number 854923 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev - 10/07 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5