NAC3MPA-1-WOT
Chassis connector, power-in, 3/16'' flat tab terminals, blue,
without insulation divider
The powerCON is a locking 3 conductor equipment AC connector
with contacts for line, neutral and pre-mating ground contact. It
replaces appliance couplers wherever a very rugged solution in
combination with a locking device is needed in order to
guarantee a safe power connection.
NAC3MPA-1 NAC3MPA-1-WOT
Attention: The powerCON is a connector without breaking
capacity, i.e. the powerCON should not be connected or
disconnected under load or live!
Features & Benefits
Locking 20 A / 250 V ac appliance coupler
•3 contacts for line, neutral and premating safety
ground
•
Power-in (blue) and power-out (grey) versions with
different keying to avoid the possibility of intermating
•Fast and easy twist lock latching system
•
Extremely robust and reliable
•Ergonomic design
•
User friendly latch design for easy handling
•UL, cUL recognized components
VDE certified
•
Branded with unique hologram - guarantees genuine
and authentic Neutrik product
•
NAC3MPA-1-WOT 1/2
Technical Information
Product
Title NAC3MPA-1-WOT
Type Chassis
Gender male
Electrical
Contact resistance ≤ 3 mΩ
Dielectric strength 4 kVdc / 2.8 kVac
Insulation resistance > 0.1 GΩ (after damp heat test IEC 68-2-30)
Number of electronical contacts 2 + PE
Rated current per contact 20 A rms
Rated voltage 250 V ac
Mechanical
Lifetime > 1000 mating cycles
Wiresize
Locking device Quick Lock
Mounting direction Front mounting
Chassis shape D
Material
Contacts Bronze (CuNi1Si0.2)
Environmental
Flammability UL 94 V-0
Temperature range -30 °C to + 80 °C
NAC3MPA-1-WOT 2/2
