Product Fact Sheet
Industrial
M.2 SATA SSD
X-60m2 2280 Series
SATA III - 6.0 Gbit/s, MLC
Commercial and Industrial
Temperature Grade
Date : February 27, 2019
Revisi on: 1.10
durabit™
“the better MLC”
Product Fact Sheet
X-60m2 2280 Series
Swissbit AG Revision: 1.10
Industriestrasse 4 Doc-2719
CH-9552 Bronschhofen www.swissbit.com File: X-60m2_2280_fact_sheet_Rev110
Switzerland industrial@swissbit.com Page 2 of 2
Product Summary
Capacities: 30 GBytes, 60 GBytes, 120 GBytes, 240 GBytes, 480 GBytes, 960 GBytes
Form Factor: PCI ExpressTM M.2 (2280) (80 mm x 22 mm x 3.3 mm)
Compliance: SATA Revision 3.1 - 6Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible)
Command Sets: Supports ATA/ATAPI-8 and ACS-2
Performance:
o Read Performance: Sequential Read up to 520 MBytes/s, Random Read IOPS up to 75,000
o Write Performance: Sequential Write up to 460 MBytes/s, Random Write IOPS up to 78,000
Operating Temperature Range
*
:
o Commercial: 0 °C to 70 °C
o Industrial: -40 °C to 85 °C
Storage Temperature Range: -40 °C to 85 °C
Operating Voltage: 3.3 V ± 5%
Power (Max Capacity): Read (Active): 1.5 W; Write (Active): 3.4 W; Idle: 410 mW; Slumber: 115 mW
Data Retention: 10 Years @ Life Begin; 1 Year @ Life End
Endurance in TeraBytes Written (TBW) Max Capacity
†
: Client > 2165; Embedded > 595; Enterprise > 555
Shock/Vibration: 1,500
g
/ 50
g
Hardware BCH Code ECC: up to 66 bit correction per 1 KByte page
NAND Flash Technology: Multi-Level Cell (MLC)
Mean Time Between Failure: > 2,000,000 hours
Data Reliability: < 1 non-recoverable error per 1016 bits read
Product Features
Best-in-Class Performance and Endurance with durabit™ Technology
Dynamic and Static Wear Leveling
Active and Passive Data Care Management
Lifetime Enhancements
o Dynamic Bad Block Remapping
o Write Amplification Reduction
On-Board Power Fail Protection
AHCI, TRIM, and NCQ Support
ATA Security Feature Set Support
DEVSLP Compatible
In-Field Firmware Update
Enterprise-Grade Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
30 μinch Gold-Plated Connector (IPC-6012B Class 2 Compliant)
AES256 Encryption (on request)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)
Why Swissbit?
Swissbit is focused on the design, development, manufacture, and support of leading edge memory and
storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, Swissbit recognizes and
addressees the higher level of application requirements of today’s industrial, Netcom, and automotive
customers by providing best-in-class products and services, with uncompromised attention to driving overall
value and quality.
*
Adequate airflow is required to ensure the drive temperature, as reported in the S.M.A.R.T. data, does not exceed the specified
maximum operating temperature.
†
According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the
specified TBW. The values listed are estimates and are subject to change without notice.
