24030080020 - HARTING TECHNOLOGY GROUP

HARTING Ha-VIS eCon Switches

Energy

Efficient

Ethernet

Voltage supply

Nominal voltage 48 VDC 54 VDC

Permissible voltage range

44 VDC ... 57 VDC

50 VDC ... 57 VDC

Surge protection Yes

Reverse polarity proof Yes

Starting current 6.40 A 7.20 A

Overcurrent protection at input Yes (12 A)

Max. power consumption without PoE 1.92 W ... 3.60 W

Cross-section / Wire gauge 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)

Connection type 3-pole, pluggable screwed contact

Pinout + / - /

Supply circuit (acc. to 60950) SELV (circuit breaker 10 A)

Ha-VIS eCon 3000

Fast Ethernet Basic

PoE / PoE+

■ Energy supply of up to 4 terminal devices via PoE+ (137 watts)

according to IEEE 802.3at

■Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3

■Variants with industrial temperature range of -40°C ... +70 °C

■Surge protection and reverse polarity protection

■Minimum energy consumption due to Energy-Eﬃcient Ethernet

■Optimised DIN rail bracket

5 to 8 Ethernet ports RJ45, SC and PoE / PoE+

Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control

cabinets

Commercial Temp.: 0 °C ... +55 °C / Industrial Temp.: -40 °C ... +70 °C

Target markets

Machinery &

Robotics Automation technology Industrial network

infrastructures

Wind Energy

Solar Energy Transportation Shipbuilding

General description

Technical characteristics

The Ha-VIS eCon 3000 Fast Ethernet PoE family of unmanaged Ethernet

switches is equipped with up to 8 Fast Ethernet ports and allow for cost-

eﬃcient and quick expansion and/or reconstruction of network

infrastructures. The switches work as power sourcing equipment (PSE)

and are capable of simultaneously providing the full PoE output of 34.2

watts on up to four ports. The slender design of the switches enables an

extremely high packing density on the DIN rail. The selection includes

various combinations of variants with RJ45 and ﬁbre optic ports. Automatic

detection of the transmission rate (auto-negotiation) and of the wiring of the

twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug

& play. All variants are available with the temperature ranges „Industrial“

and „Commercial“.

Switch Features

Enclosures width 25 mm

Number of ports 5, 6, 7, 8

Switching technology Store and Forward

Supported standards IEEE 802.3

Frame Size 1522 bytes

MAC table size 1k entries

Packet buﬀer size 448 kbit

Non-blocking Yes

Quality of service Yes

Energy-Eﬃcient Ethernet Yes

PROFINET compatible Yes

EthernetIP compatible Yes

Ethernet Ports 10BASE-Te / 100BASE-TX

Connection type RJ45

Auto-negotiation Yes

Auto-polarity Yes

Auto-MDI(X) Yes

Transfer conditions Twisted Pair

Transfer speed 10 / 100 Mbit/s

Transfer length 100 m (twisted pair, Cat 5)

Ethernet Ports 100BASE-FX

Type of ﬁbre Multimode (MM) Singlemode (SM)

Connection type SC Duplex

Transfer conditions FO

Wavelength 1310 nm

Transfer speed 100 Mbit/s

Transfer length 2 km 15 km

Output power -20 dBm ... -14 dBm -15 dBm ... -8 dBm

Input sensitivity ≤ -30 dBm ≤ -32 dBm

Ambient conditions

Commercial temperature range 0 °C ... +55 °C

Industrial temperature range -40 °C ... +70 °C

Storage temperature range -40 °C ... +85 °C

Relative humidity (operation) 0 % ... 95 % (not-condensing)

Relative humidity

(storage and transport) 0 % ... 95 % (not-condensing)

Air pressure (operation) 2000 m (795 hPa)

HARTING Technology Group

P.O.Box 1473, D-32325 Espelkamp

Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany

ICPN-Service@harting.com | Service hotline: +49 5772 47-9479

Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches

Note: We reserve the right to make technical changes to the products and to the content of this

document at any time without prior notication. The HARTING Technologiegruppe does not accept

any responsibility for possible errors or incompletions in this document. We reserve all the rights to

this document and the topics and illustrations contained within it. Copying, disclosure to third parties

or use of its content - even partially - is forbidden without the prior written consent of the HARTING

Technologiegruppe.

Status and diagnostic displays

Power („Pwr“) lights up green Supply voltage is applied

Link/Activity („L/A“) oﬀ No link

Link/Activity („L/A“) lights up green Link is active

Link/Activity („L/A“) lights up green Link is active and data is transferred

Link speed („Spd“) oﬀ 10 Mbit/s

Link speed („Spd“) lights up yellow 100 Mbit/s

PoE status oﬀ PoE is inactive / low voltage

PoE status lights up green Voltage in PoE range

PoE status lights up blue Voltage in PoE+ range

PoE status lights up red Error

Approvals

CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT

ECE - Approval mark (E1): see table technical characteristics

EMC and environmental conditions

EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024)

Electrostatic discharge (ESD) EN 61 000-4-2

Electromagnetic ﬁeld EN 61 000-4-3

Rapid transients (burst) EN 61 000-4-4

Surge voltages EN 61 000-4-5

Conducted interference voltages EN 61 000-4-6

EMC Interference emission (EN 61000-6-4, EN 55 032,

FCC CFR 47 Part 15)

Mechanical stability (EN 60721-3)

IEC 60068-2-6 Vibration

IEC 60068-2-6 Vibration resonance search

IEC 60068-2-27 Shock test

Included in delivery

■Pluggable screw contact for voltage supply

■ Assembly instruction

Enclosures

Enclosures width 25 mm

Dimensions H x W x D

(without pluggable screw contact

and holding bracket)

142 mm x 25 mm x 107.5 mm

Weight 480 g ... 508 g

Type of installation 35 mm DIN rail acc. to EN 60 715

Material enclosures Anodised aluminium / Powder-coated

steel sheet

Protection degree (withplugged

screw contact) IP30

Degree of protection III

Ports / order information

Current con-

sumption@ 54

VDC with PoE

Commercial Temp.: 0 °C ... +55 °C Industrial Temp.: -40 °C ... +70 °C

RJ45 SFP SC Enclosures

width

MTBF

in Mio. h Switch Part no. Switch Part no.

4 - 1x MM (2 km) 25 mm 2.41 A 1.19 Ha-VIS eCon 3041B-AD-P 24 03 004 1130 Ha-VIS eCon 3041BT-AD-P 24 03 004 1120

4 - 1x SM (15 km) 25 mm 2.41 A 1.19 Ha-VIS eCon 3041B-AF-P 24 03 004 1230 Ha-VIS eCon 3041BT-AF-P 24 03 004 1220

4 - 2x MM (2 km) 25 mm 2.43 A 1.17 Ha-VIS eCon 3042B-AD-P 24 03 004 2130 Ha-VIS eCon 3042BT-AD-P 24 03 004 2120

4 - 2x SM (15 km) 25 mm 2.43 A 1.17 Ha-VIS eCon 3042B-AF-P 24 03 004 2230 Ha-VIS eCon 3042BT-AF-P 24 03 004 2220

6 - - 25 mm 2.40 A 1.18 Ha-VIS eCon 3060B-A-P 24 03 006 00301Ha-VIS eCon 3060BT-A-P 24 03 006 00201

6 - 1x MM (2 km) 25 mm 2.42 A 1.15 Ha-VIS eCon 3061B-AD-P 24 03 006 1130 Ha-VIS eCon 3061BT-AD-P 24 03 006 1120

6 - 1x SM (15 km) 25 mm 2.42 A 1.15 Ha-VIS eCon 3061B-AF-P 24 03 006 1230 Ha-VIS eCon 3061BT-AF-P 24 03 006 1220

8 - - 25 mm 2.40 A 1.14 Ha-VIS eCon 3080B-A-P 24 03 008 00301Ha-VIS eCon 3080BT-A-P 24 03 008 00201

Drawings

Technical characteristics / order information

PoE PoE PoE+

Number of PoE ports 4

Standard IEEE 802.3af / IEEE 802.3at

PoE type PSE

Supported mode Alternative A

Supply voltage PSE 48 VDC 54 VDC

Max. current consumption PSE

1380 mA 2380 mA

Max. current 375 mA 638 mA

Maximum output power PSE 15.4 W per port

61.6 W total

34.2 W per port

136.8 W total

Supported cabling See 802.3at, section 33.1.4

PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+)

1 E1 Approval

Date of issue 06.2018

ICPN Datasheet 0844/02

HARTING Technology Group