Embedded Power for Business-Critical Continuity Rev. 08.13.07 LPQ110 Series 1 of 3 LPQ110 Series 110 Watts Total Power: 80 - 110 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Quad Special Features * * * * * * * * * Universal input High efficiency Remote sense on main output Built-in EMI filter Low output ripple Adjustable 5 V output Overvoltage protection Overload protection Adjustable floating 4th output (On LPQ112 and LPQ113) * Power fail * Optional L bracket (-B suffix) * Cover kit available LPX110-C Electrical Specifications Input Input range 85 - 264 Vac; 120 - 300 Vdc Frequency 47 - 440 Hz Inrush current < 18 A peak @ 115 Vac; < 36 A peak @ 230 Vac, cold start @ 25 C Efficiency EMI filter 70% typical at full load Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Safety ground leakage current 0.5 mA @ 50/60 Hz, 264 Vac input Output Maximum power 80 W convection 110 W with 30 CFM forced air Adjustment range Cross regulation 5% min. on main; 5 - 25 V on 4th output on LPQ112 and LPQ113 2% on output 1; 3% on outputs 2, 3 & 4 Hold-up time 20 ms @ 80 W load, 115 VAC nominal line Safety Overload protection hort circuit protection on all outputs. Case overload protected @ 110-145% S above peak rating VDE 0805/EN60950 (IEC950) 11774-3336-1245 (LC #84997) UL UL1950 E132002 CSA CSA 22.2-234 Level 3 LR53982C NEMKOEN 60950/EMKO-TUE P94102464 (74-sec) 203 BABT EN60950/BS7002 PS/605823 CB Certificate and report 1423, 1424, 1425 CE Mark (LVD) Overvoltage protection 5.7 - 6.7 VDC on main output. Latching type, recycle AC to reset Embedded Power for Business-Critical Continuity Rev. 08.13.07 LPQ110 Series 2 of 3 Logic Control Power failure TTL logic signal goes high 50 - 150 msec after 5 V output. It goes low at least 4 msec before loss of regulation Remote sense ompensates for 0.5 V lead drop min. Will operate without C remote sense connected. Reverse connection protected. Environmental Specifications Operating temperature: 0 to 50 C ambient. Derate each output 2.5% per degree from 50 to 70 C (except for -C version). Storage temperature: -40 C to +85 C Temperature coefficient: 0.4% per C Electromagnetic Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 susceptibility: Humidity: Vibration: MTBF demonstrated: Operating; non-condensing 5% to 95% Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5Hz to 500Hz, operational > 550,000 hours at full load and 25 C ambient conditions Ordering Information Maximum Load Maximum Load Model Output Minimum Peak with Convection with 30CFM Regulation 2 Number Voltage Load Load 1 Cooling Forced Air LPQ112 5V 12 V -12 V 5 - 25 V LPQ113 5V 15 V -15 V 5 - 25 V LPQ114 5V 12 V -12 V -12 V 2A 0A 0A 0A 2A 0A 0A 0A 2A 0A 0A 0.5 A 9A 4.5 A 0.7 A 2.5 A 9A 4.5 A 0.7 A 2.5 A 9A 4.5 A 0.7 A 3.5 A 11 A 5A 1.0 A 3A 11 A 5A 1.0 A 3A 11 A 5A 1.0 A 4.5 A 15 A 9A 1.5 A 3.5 A 15 A 9A 1.5 A 3.5 A 15 A 9A 1.5 A 5A 2% 3% 5% 3% 2% 3% 5% 3% 2% 3% 5% +10 / -5% Ripple P/P (PARD)3 50 mV 120 mV 120 mV 240mV, max 50 mV 150 mV 150 mV 240mV, max 50 mV 120 mV 120 mV 240mV Pin Assignments Connector LPQ112 LPQ113 LPQ114 SK1-1 SK1-3 SK1-5 SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK2-10 SK2-11 SK2-12 SK201-1 SK201-2 SK202-1 SK202-2 GND Neutral Line +5 V +5 V +5 V Common Common Common Common +12 V +12 V -12 V +5-25 V -5-25 V +sense -sense POK GND GND Neutral Line +5 V +5 V +5 V Common Common Common Common +15 V +15 V -15 V +5-25 V -5-25 V +sense -sense POK GND GND Neutral Line +5 V +5 V +5 V Common Common Common Common +12 V +12 V -12 V +24 V Common +sense -sense POK GND Mating Connectors AC Input: Molex 09-50-8051 (USA) 09-91-0500 (UK) PINS: 08-58-0111 DC Outputs: Molex 09-50-8121 (USA) 09-91-1200 (UK) PINS: 08-58-0111 Remote Molex 22-01-1022 (USA) Sense 22-01-1023 (UK) Power Fail: PINS: 08-50-0114 Astec Connector Kit #70-841-006, includes all of the above 1.Peak current lasting < 30 seconds with a maximum 10% duty cycle. 1. Specifications subject to change without notice. 2.At 25 C including initial tolerance, line voltage, load currents and output voltages adjusted to factory 2. All dimensions in inches (mm), tolerance is 0.02" ( 0.5mm) settings. 3.Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line voltage and 3. Specifications are for convection rating at factory settings unless otherwise stated. load ranges. 4. Mounting holes M1 and M2 should be grounded 4.4th output adjustable 5 to 25 V, factory set at 5 V. for EMI purposes. 5. Minimum loads are required. 5. Mounting hole M1 is safety ground connection. Note: -B suffix added to the model number indicates L bracket option. 6. L bracket mounting (6-32) maximum insertion depth is .20" (5). 7. Warranty: 2 year 8. Weight: 1.25 lb./0.57 kg Embedded Power for Business-Critical Continuity Rev. 08.13.07 LPQ110 Series 3 of 3 Mechanical Drawing -B Bracket Americas 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone:+1 760 930 4600 Facsimile: +1 760 930 0698 #6-32 PEM 6 places 4.28" (108.6) Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone:+44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 2.5" (63.5) Asia (HK) 6.4" (162.6) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone:+852 2176 3333 Facsimile: +852 2176 3888 7.3" (185.5) For global contact, visit: www.Emerson.com/EmbeddedPower 2.2" (56) techsupport.embeddedpower @emerson.com 0.86" (21.8) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 5.9" (150.0) 0.25" (6.35) SK 202 (POK) SK 201 1 2 M2 3.5" (88.9) 4th O/P ADJ 1 3 SK 1 6.5" (165.1) 0.25" (6.35) 7.0" (177.8) (+S) 1 (-S) 2 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power SK 2 5V O/P ADJ 4.0" (101.6) 1 2 3 4 5 6 7 8 9 10 11 12 Connectivity DC Power Embedded Computing GND N L Embedded Power M1 0.156" (4) DIA (4 places) Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services 1.80" (45.7) Surge Protection EmersonNetworkPower.com 0.12" (3) Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2010 Emerson Electric Co.