HD74HC139P - RENESAS TECHNOLOGY

1/9July 2001

■HIGH SPE ED:

tPD = 13ns (TYP.) at VCC = 6V

■LOW POWER DISSIPATION:

ICC = 4µA(MAX.) at TA=25°C

■HIGH NOISE IMMUNIT Y:

VNIH = VNIL = 28 % VCC (MIN.)

■SYMMETRICAL OUTPUT IMPEDANCE:

|IOH| = IOL = 4mA (MIN)

■BALANCED PROPAGATION DELAYS:

tPLH ≅ tPHL

■WIDE OPERATING VOLTAGE RANGE:

VCC (O PR) = 2V to 6V

■PIN AND FUNCTION COMPAT IBLE WITH

74 SERIES 139

DESCRIPTION

The M74HC139 is an high speed CMOS QUAD

2- INPUT NAND GATE fabricated with silicon gate

C2MOS technology.

The active l ow enable input can be used for gating

or as a data input for demultiplexing applications.

Whi le the enable i nput is held high, all four outputs

are high independently of t he other inputs.

All inputs are equipped with protection circuits

against static discharge and transient excess

voltage.

M74HC139

DUAL 2 TO 4 DECODER/DEMULTIPLEXER

PIN CONNECTION AND IEC LOGIC SYMBOLS

ORDER CODES

PACKAGE TUBE T & R

DIP M74HC139B1R

SOP M74HC139M1R M74HC139RM13TR

TSSOP M74HC139TTR

TSSOPDIP SOP

M74HC139

2/9

INPUT AND OUT PUT EQUIVALENT CIRCUIT PIN DESCRIPTION

TRUTH TABLE

LOGIC DIAGRAM

Th i s l ogic dia gram has not be used to estimat e propagation del ays

PIN No SYMBOL NAME AND FUNCTION

1, 15 1G, 2G Enable Inputs

2, 3 1A, 1B Address Inputs

4, 5, 6, 7 1Y0 TO 1Y3Outputs

12, 11, 10, 9 2Y0 TO 2Y3Outputs

14, 13 2A, 2B Address Inputs

8 GND Ground (0V)

16 VCC Positive Supply Voltage

INPUTS OUTPUTS SELECTED

OUTPUT

ENABLE SELECT Y0Y1Y2Y3

GBA

H X X H H H H NONE

L LLLHHH Y

LLHHLHH Y

LHLHHLH Y

L HHHHHL Y

M74HC139

3/9

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are t hose v alues beyond which damage to the devic e may occur. Functional operation under these conditions is

not implie d

(* ) 500mW a t 65 °C; derate to 30 0m W by 10mW/°C fr om 65 °C to 85°C

RECOMMENDE D OPERATING CONDITIONS

Symbol Parameter Value Unit

VCC Supply Voltage -0.5 to +7 V

VIDC Input Voltage -0.5 to VCC + 0.5 V

VODC Output Volta ge -0.5 to VCC + 0.5 V

IIK DC Input Diode Current ± 20 mA

IOK DC Output Diode Current ± 20 mA

IODC Output Current ± 25 mA

ICC or IGND DC VCC or Ground Curre nt ± 50 mA

PDPower Dissipation 500(*) mW

Tstg Storage Temperature -65 to +150 °C

TLLead Temperature (10 sec) 300 °C

Symbol Parameter Value Unit

VCC Supply Voltage 2 to 6 V

VIInput Voltage 0 to VCC V

VOOutput Voltage 0 to VCC V

Top Operating Temperature -55 to 125 °C

tr, tf

Input Rise and Fall Time VCC = 2.0V 0 to 1000 ns

VCC = 4.5V 0 to 500 ns

VCC = 6.0V 0 to 400 ns

M74HC139

4/9

DC SPE CIFI CATI ONS

AC EL ECTRI CAL CHARACTERISTICS (CL = 50 pF, Input tr = tf = 6 ns)

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

VIH High Level Input

Voltage 2.0 1.5 1.5 1.5 V4.5 3.15 3.15 3.15

6.0 4.2 4.2 4.2

VIL Low Level Input

Voltage 2.0 0.5 0.5 0.5 V4.5 1.35 1.35 1.35

6.0 1.8 1.8 1.8

VOH High Level Output

Voltage 2.0 IO=-20 µA1.9 2.0 1.9 1.9

4.5 IO=-20 µA4.4 4.5 4.4 4.4

6.0 IO=-20 µA5.9 6.0 5.9 5.9

4.5 IO=-4.0 mA 4.18 4.31 4.13 4.10

6.0 IO=-5.2 mA 5.68 5.8 5.63 5.60

VOL Low Level Output

Voltage 2.0 IO=20 µA0.0 0.1 0.1 0.1

4.5 IO=20 µA0.0 0.1 0.1 0.1

6.0 IO=20 µA0.0 0.1 0.1 0.1

4.5 IO=4.0 mA 0.17 0.26 0.33 0.40

6.0 IO=5.2 mA 0.18 0.26 0.33 0.40

IIInput Leakage

Current 6.0 VI = VCC or GND ± 0.1 ± 1 ± 1 µA

ICC Quiescent Supply

Current 6.0 VI = VCC or GND 44080µA

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

tTLH tTHL Output Transition

Time 2.0 30 75 95 110 ns4.5 8151922

6.0 7131619

PLH tPHL Propagation Delay

Time (A, B -Y) 2.0 45 130 165 195 ns4.5 15 26 33 39

6.0 13 22 28 33

tPLH tPHL Propagation Delay

Time (G -Y) 2.0 39 110 140 165 ns4.5 13 22 28 33

6.0 11 19 24 28

M74HC139

5/9

CAPACITIVE CHARACT ERISTICS

1) C PD is defined as the value of the IC’s internal equivalent capacitance which is calculat ed from the operating current cons umption without

load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/2(p er ci rcui t )

TEST CIRCUIT

CL = 50p F or equiva l ent (i nclud es jig and probe capacit ance)

RT = ZOUT of pulse ge nerator (typically 50Ω)

WAVEFORM : PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA = 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

CIN Input Capacitance 5.0 5101010pF

PD Power Dissipation

Capacitance (note

1) 5.0 46 pF

M74HC139

6/9

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

a1 0.51 0.020

B 0.77 1.65 0.030 0.065

b 0.5 0.020

b1 0.25 0.010

D 20 0.787

E 8.5 0.335

e 2.54 0.100

e3 17.78 0.700

F 7.1 0.280

I 5.1 0.201

L 3.3 0.130

Z 1.27 0.050

Plastic DIP-16 (0.25) MECHANICAL DAT A

P001C

M74HC139

7/9

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.75 0.068

a1 0.1 0.2 0.003 0.007

a2 1.65 0.064

b 0.35 0.46 0.013 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.019

c1 45° (typ.)

D 9.8 10 0.385 0.393

E 5.8 6.2 0.228 0.244

e 1.27 0.050

e3 8.89 0.350

F 3.8 4.0 0.149 0.157

G 4.6 5.3 0.181 0.208

L 0.5 1.27 0.019 0.050

M 0.62 0.024

S8° (max.)

SO-16 MECHANICAL DATA

PO13H

M74HC139

8/9

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 1.2 0.047

A1 0.05 0.15 0.002 0.004 0.006

A2 0.8 1 1.05 0.031 0.039 0.041

b 0.19 0.30 0.007 0.012

c 0.09 0.20 0.004 0.0089

D 4.9 5 5.1 0.193 0.197 0.201

E 6.2 6.4 6.6 0.244 0.252 0.260

E1 4.3 4.4 4.48 0.169 0.173 0.176

e 0.65 BSC 0.0256 BSC

K0° 8°0° 8°

L 0.45 0.60 0.75 0.018 0.024 0.030

TSSOP16 MECHANICAL DATA

PIN 1 IDENTIFICATION

A1 L

0080338D

M74HC139

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the

conseque nces of use of such i nformation nor for any infringement of patents or ot her rights of third parties which may result from

its use. No licens e is granted by imp lica tion or otherwise under any pat ent or patent rights of STMicroelectron ics. Specificat ions

mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information

previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or

systems with out expres s written approval of STMicroelec tronics .

STM icroelectron i cs G ROUP OF COMP ANIES

Australia - Brazil - C hi na - F i nland - France - Germany - Hong Kon g - I ndi a - Italy - Japan - Ma l aysia - Ma l ta - Mo rocco

Singapo re - Spain - Sweden - Sw i tzerland - Uni ted Kingdom