SPEC NO: DSAC1601 REV NO: V.6 DATE: MAR/19/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1203002373
3.2x1.6mm SMD CHIP LED LAMP
Part Number: APTR3216MGC Mega Green
Features
z3.2mmx1.6mm SMT LED,1.05mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVavrious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Mega Green source color devices are made with AlGaInP
on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAC1601 REV NO: V.6 DATE: MAR/19/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1203002373
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTR3216MGC Mega Green (AlGaInP) WATER CLEAR 18 70 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Mega Green 574 nm IF=20mA
λD [1] Dominant Wavelength Mega Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Mega Green 26 nm IF=20mA
C Capacitance Mega Green 20 pF VF=0V;f=1MHz
VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA
IR Reverse Current Mega Green 10 uA VR=5V
Parameter Mega Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAC1601 REV NO: V.6 DATE: MAR/19/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1203002373
Mega Green APTR3216MGC
SPEC NO: DSAC1601 REV NO: V.6 DATE: MAR/19/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1203002373
APTR3216MGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAC1601 REV NO: V.6 DATE: MAR/19/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1203002373
PACKING & LABEL SPECIFICATIONS APTR3216MGC
