EVERLIGHT ELECTRONICS CO.,LTD Technical Data Sheet 1.4 mm Height Subminiature , Axial Flat Top View LED 28-21SUBC/S400-A6/TR8 Features Package in 12mm tape on 7" diameter reels. Compatible with automatic placement equipment. EIA Std. package. Mono-color type. Pb-free The product itself will remain within RoHS compliant version. Descriptions The 28-21 SMD LED is much smaller than leaded components .Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained. Besides, light weight makes them ideal for miniature applications. Furthermore by automation assembly machines the accuracy is anticipated. Applications Small indicator for indoor applications. Flat backlight for LCD, switches and symbols. Indicator and backlight in office equipment. Indicator and backlight for battery driven equipment. Indicator and backlight for audio and video equipment. Backlighting in dashboards and switches. Telecommunicationindicator and backlighting in telephone and fax. Device Selection Guide Part No. 28-21SUBC/S400-A6/TR8 Chip Material InGaN Emitted Color Resin Color Blue Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Package Outline Dimensions Note: The tolerances unless mentioned are 0.1, unit=mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Pd 95 mW ESD 150 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @ 1KHz) Power Dissipation Electrostatic Discharge(HBM) Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 30 36 ---- mcd Viewing Angle 21/2 ---- 150 ---- deg Peak Wavelength p ---- 468 ---- nm d ---- 470 ---- nm ---- 25 ---- nm Forward Voltage VF 2.7 3.3 3.7 V Reverse Current IR ---- ---- 50 A Dominant Wavelength Spectrum Radiation Bandwidth Condition IF=20mA VR=5V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel & Carrier Tape Dimensions Note: The tolerances unless mentioned are 0.1, unit=mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Loaded quantity per reel 2000 PCS/reel Note: Tolerances Unless Dimension is 0.1mm , Unit = mm Moisture Resistant Packaging Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample Ac/Re No. Items Test Condition Hours/Cycles Size Temp. : 2605 6 Min. 22 Pcs. 0/1 1 Reflow Soldering Min. 5 sec. 2 3 4 5 Temperature Cycle H : +100 15 min. 5 min. L : -40 15 min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100 5 min. 10 sec. L : -10 5 min. 300 Cycles 22 Pcs. 0/1 Temp. : 100 1000 Hrs. 22 Pcs. 0/1 Temp. : -40 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85/ 85% RH 1000 Hrs. 22 Pcs. 0/1 Page: 7 of 9 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen EVERLIGHT ELECTRONICS CO.,LTD 28-21SUBC/S400-A6/TR8 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 9 Device No. : SZDLE-281- Prepared date: 08-Apr-2009 Prepared by: Qilong Chen