OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 1 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Description:
The OPIA series optocouplers are d esigned for applications that use an analog output (Phototransistor or
Photodarlington) in a surface mount packag e. A wide selection of configurations are available. With typical
isolation voltage of 2,500 or 3,750 Volts(RMS), these products meet typical power system isolation requirements.
Theory of operation: The LED transmitt er is u sed to illuminate the Photo sensor providing electrical isolatio n
between two power syste ms while maintaining the ability to transmit information from one power syste m to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 3,750 Volts(RMS). A variety of LED and photo
sensor configurations a re available depending on the system requirements.
The Current Transfer Ratio (CTR) is determined using the output current and input current for analog photo
sensors. CTR ratios can range fro m as low as 5 to over 9,000 depending on the device.
All SMD products are shipped in a ship ping tube with “TR” identified on the end of the part number.
Example: OPI401ATRE is a 4-Pin SMD shipped in tape and reel (TR)
Features:
• 2,500 or 3,750 Vrms electrical isolation
• Choice of a Single and Dual LED
• Phototransistor or Photo Darlington Sensor
• Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
• UL Certification No: E58730
• VDE No: 40026577(OPIA401-404), 40026553(OPIA405-409)
RoHS
Applications:
• High voltage isolation: 2,500 or 3,750 Volts(RMS)
• PCBoard power system isolation
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
200100*
10
20 ==
−
−
=mA
mA
Current
L
ED CurrentrPhotosenso
CTR
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 2 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Part Number Pin #
1 2 3 4
OPIA401B A K E C
OPIA402B A-K K-A E C
OPIA403B A K E C
OPIA404B A K E C
OPIA405C A E C
OPIA406C A K E C
OPIA407C A-K K-A E C
OPIA408C A K E C
OPIA409C A K E C
OPIA414B A K E C
Package Style A
(SMD)
Package Style B
(SOP)
Package Style C
(SSOP)
Package Outline Dimensions and Schematics: Top-View
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 3 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Analog Output Devices Ordering Information
Part Number Isolation Voltage
Max. (Vrms) CTR
Min/Typ/Max Typ. Tr / Tf (µs)
RL = 100 ohms Package Configuration
OPIA401B 3,750 1,000 / - / - 100 / 20 4-Pin SOP A K—C E (Dar)
OPIA402B 3,750 20 / - 400 4 / 3 4-Pin SOP A K, K A—C E
OPIA403B 3,750 600 / 1,600 / 7,500 60 / 53 4-Pin SOP A K—C E (Dar)
OPIA404B 3,750 50 / - / 600 5 / 4 4-Pin SOP A K—C E
OPIA405CxxA 2,500 80 / - / 160 3 / 5 4-Pin SSOP A K—C E
OPIA406C 2,500 200 / 2,000 / - 200 / 200 4-Pin SSOP A K—C E (Dar)
OPIA407C 2,500 80 / - / 600 3 / 5 4-Pin SSOP A K, K A—C E
OPIA408C 2,500 200 / 2,000 / - 200 / 200 4-Pin SSOP A K—C E (Dar)
OPIA409C 2,500 400 / 2,000 - 40 / 10 4-Pin SSOP A K—C E (Dar)
OPIA414B 3,750 100 / - / 600 4 / 3 4-Pin SOP A K—C E
Configuration: Definition of Terms
LED Identification—Sensor Id entification
Configuration
Information LED A = Anode K = Cathode
Sensor B = Base C = Collector E = Emitter (Dar) = Photodarlington
Packaging Part Number Suffix: TU = Shipped in Tubes
TR = Tape & Reel Example: OPIA405CTUE
OPIA405CxxB 2,500 130 / - / 260 3 / 5 4-Pin SSOP A K—C E
OPIA405CxxC 2,500 200 / - / 400 3 / 5 4-Pin SSOP A K—C E
OPIA405CxxD 2,500 300 / - / 600 3 / 5 4-Pin SSOP A K—C E
OPIA405CxxE 2,500 50 / - / 600 3 / 5 4-Pin SSOP AK—CE
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 4 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OPIA404, OPIA414
OPIA401, OPIA402, OPIA403
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
-55° C to +125° C
-40°C to +125° C
-55°C to +150° C
Operating Temperature
All except the part numbers noted below
OPIA404
OPIA414
-30° C to +100° C
-55° C to +115° C
-30° C to +115° C
Isolation voltage (1 minute)
OPIA400
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
5,000 Vrms
3,750 Vrms
2,500 Vrms
Total Package Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405
OPIA406, OPIA407, OPIA408, OPIA409
170 mW
160 mW
-
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C
Input Diode
Continuous Forward Current
All except the part number noted below
OPIA414
50 mA
10 mA
Peak Forward current (1 µs pulse width, 300 pps)
All except the part number noted below
OPIA414
1 A
200 mA
Reverse Voltage
OPIA401, OPIA403, OPIA404, OPIA405, OPIA406, OPIA409, OPIA414
OPIA402, OPIA407, OPIA408, OPIA409, OPIA410, OPIA412
6 V
-
Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
OPIA414
70 mW
60 mW
15 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA402, OPIA404
OPIA401, OPIA409
OPIA403
OPIA406, OPIA408
OPIA405, OPIA407, OPIA414
60 V
300 V
35 V
40 V
80 V
Emitter-Collector Voltage
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401
OPIA402, OPIA403, OPIA404
OPIA409
OPIA414
6 V
0.1 V
5 V
0.3 V
7 V
Collector Current
OPIA402, OPIA404, OPIA405, OPIA407, OPIA414
OPIA401, OPIA403
OPIA406, OPIA408
OPIA409
50 mA
150 mA
90 mA
60 mA
Power Dissipation
All except the part numbers noted below
OPIA405, OPIA406, OPIA407, OPIA408, OPI409
150 mW
120 mW
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 5 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode
VF
Forward Voltage
All except those noted below
OPIA404
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401, OPIA409, OPIA414
-
-
-
-
1.2
1.6
1.1
1.2
1.4
1.75
1.4
1.4
V
IF = 20 mA
IF = 10 mA
IF = 5 mA
IF = 10 mA
I
VFM
Peek Forward Voltage
OPIA403
OPIA405
OPI401, OPIA404, OPIA414, OPIA406,
OPIA407, OPIA408, OPIA409
-
-
-
-
-
-
3.5
3.0
-
V
IFM = 500 mA
IR
Reverse Current
All except those noted below
OPIA404, OPIA407, OPIA408, OPIA414
OPIA405, OPIA406, OPIA409
-
-
-
-
-
-
10
-
5
µA
VR = 4 V
-
VR = 5 V
Ct
Terminal Capacitance
All except those noted below
OPIA402, OPIA404, OPIA414
OPIA408, OPIA409
-
-
-
30
30
60
-
250
-
pf
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1M Hz
Output Phototransistor
ICEO
Collector dark Current
OPIA400, OPIA402, OPIA404
OPIA405, OPIA407
OPIA414
-
-
-
-
-
-
100
100
100
nA
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 80 V
IF = 0 mA, VCE = 50 V
VCE(SAT)
Collector-emitter Saturation Voltage
OPIA405, OPIA407
OPIA402, OPIA404, OPIA410
OPIA414
-
-
-
0.1
0.1
0.1
0.3
0.3
0.2
V
IF = 10 mA, IC = 2 mA
IF = 20 mA, IC = 1 mA
IF = 10 mA, IC = 1 mA
fC Cutt-Off frequency
All except those noted below
-
-
-
K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR
Rise Time
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
-
-
4
3
5
18
18
20
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
tF
Fall Time
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
-
-
3
5
4
18
18
20
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
Continued on Next Page
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 6 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics (OPIA400 Series) - Continued from Previous Page
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Output PhotoDarlington
ICEO
Collector dark Current
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
-
-
-
-
-
-
-
1.0
1.0
0.4
0.4
µA
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
IF = 0 mA, VCE = 40 V
IF = 0 mA, VCE = 300 V
VCE(SAT)
Collector-emitter Saturation Voltage
OPIA403
OPIA406, OPIA408, OPIA409
OPIA401
-
-
-
-
-
0.8
1.0
1.0
1.5
V
IF = 20 mA, IC = 1 mA
IF = 1 mA, IC = 2 mA
IF = 20 mA, IC = 100 mA
fC
Cut-Off frequency
OPIA401, OPIA406, OPIA408, OPIA409
OPIA403
-
1.0
-
7.0
-
-
K Hz
-
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR
Rise Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
-
-
-
100
60
200
40
300
300
-
-
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
tF
Fall Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
-
-
-
20
53
200
10
100
250
-
-
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
Coupled Characteristics
CTR
Current Transfer Ratio
OPIA404
OPIA401
OPIA402
OPIA403
OPIA405(See Table, page 3)
OPIA406, OPIA408
OPIA407
OPIA409
OPIA414
50
1,000
20
600
50
20
0.3
400
100
-
-
-
-
-
2,000
1.0
2,000
-
600
-
400
7,500
600
-
3.0
-
600
%
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
Cf Floating Capacitance
OPIA405, OPIA406, OPIA407,
OPIA408, OPIA409
-
- 0.6
0.4 1.0
- pF V = 0.0 V, f = 1M Hz
RISO Isolation resistance 5X1010 1011 - ohm C500V, 40% to 60%RH
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 7 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 8 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
Forward Current—IF(mA)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 9 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 10 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 11 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 12 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
Forward Current—IF(mA)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 13 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 14 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 15 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 16 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 17 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 18 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
Forward Current—IF(mA)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 19 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 20 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 21 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 22 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
Forward Current—IF(mA)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 23 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 24 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 25 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 26 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 27 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Quality / Reliability Requirements
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Parameter Failure Criteria Conditions
HTRB D IC(OFF) ± 10% 11 samples after 500Hrs
0 Fail @ VCE = 5.0VDC, Ta = 70°C
HTFB D IC(ON) ± 10% 50 samples after 96Hrs
0 Fail @ Max PD, Ta = 25°C
MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC
Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020 B
Lead Solderability 0 Fail per Method 208 of MIL-STD-202.
Glass Transition of body 125°C Min. DSC test method
Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E
High Temperature Storage ± 20% 85°C, 500Hrs
Autoclave 0 Fail
TA = 121°C, Pressure = 15psi, Humidit y
= 100%, Time = 96Hrs
Label Identification
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week n umber of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPIA407C-TR__
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 28 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Information:
Optek's Optocoupler
Part Numbers Packaging
Quantities
Tube Inner Small Carton Medium Carton Large Carton
Qty Weight
52 x 7 x 7.5
cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5
cm 53.5 x 30.7 x 25 cm
Qty Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weig
ht
P/H
and
SMD
4-PIN
OPIA400D/A 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5
6-PIN
OPIA6XXD/A Series 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0
8-PIN
OPIA8XXD Series and OPID804D 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5
M/F
SOP
4-PIN and 5-PIN
OPIA401B - OPIA404B, OPIA414B,
OPIA500B 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0
SSOP 4-PIN
OPIA405C - OPIA409C 170 -- 10,200 --
P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil Lead -
Spacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 29 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Specifications—SMD— (TU):
Quantity: 4-pin (SMD): 100pcs/tube
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tube Packaging Specifications— SOP (Mini-flats) and SSOP— (TU):
Quantity: 4-pin (SOP): 100pcs/tube
4-pin (SSOP): 170pcs/tube
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A .5 8/09
Page 30 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SMD and SOP—(TR):
Quantity: 4-pin (SMD): 1000p cs/Reel
4-pin (SOP): 1000pcs/Reel
4-pin (SSOP): 3000pcs/Reel
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tape Feeder:
Direction:
Reel:
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A .5 8/09
Page 31 of 31
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SSOP—(TR):
Quantity: 4-pin (SSOP): 2000pcs/Reel
Ø.059±0.004
[Ø1.50±0.05]
.157±0.008
[4.0±0.02 ]
.078±0.008
[2.0±0.02]
0.068±0.008
[1.75 ±0.02]
0.088±0.008 [2.25 ±0.02]
.157±0.008]
[4.0±0.02]
.100±0.008
[2.55±0.02]
0.285±0.008 [7.25 ±0.02]
Ø.059±0.004
[Ø1.50±0.05]
0.472±0.008 [12.0 ±0.02]
Ø.531±0.02
[Ø13.5±0.5] Ø.098±0.02
[2.5±0.5]
Ø.826±0.04 [Ø21±1.0]
Ø7.00±0.04 [Ø178±1.0 ]
2.36±0.04 [60±1.0]
.511±0.04 [13±0.5]
.629±0.04 [16.0±0.5]
Direction:
Reel:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
