Preliminary Datasheet BCR5PM-14LG Triac R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Medium Power Use Features The Product guaranteed maximum junction temperature 150C Insulated Type Planar Type UL Recognized: File No. E223904 IT (RMS) : 5 A VDRM : 800 V (Tj = 125C) IFGTI, IRGTI, IRGTIII : 30 mA Viso : 2000 V Outline RENESAS Package code: PRSS0003AA-A (Package name: TO-220F ) 2 3 1 1. T1 Terminal 2. T2 Terminal 3. Gate Terminal 1 2 3 Applications Switching mode power supply, Washing machine, small motor controller, copying machine, electric heater control, and other general controlling devices Maximum Ratings Parameter Symbol Repetitive peak off-state voltageNote1 VDRM Non-repetitive peak off-state voltageNote1 VDSM R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Voltage class 14 800 700 840 Unit Conditions V V V Tj = 125C Tj = 150C Page 1 of 7 BCR5PM-14LG Preliminary Parameter RMS on-state current Symbol IT (RMS) Ratings 5 Unit A Surge on-state current ITSM 50 A I2t 10.4 A2s PGM PG (AV) VGM IGM Tj Tstg -- Viso 5 0.5 10 2 - 40 to +150 - 40 to +150 2.0 2000 W W V A C C g V I2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate voltage Peak gate current Junction temperature Storage temperature Mass Isolation voltage Conditions Commercial frequency, sine full wave 360 conduction, Tc = 113C 60Hz sinewave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Ta = 25C, AC 1 minute, T1 T2 G terminal to case Notes: 1. Gate open. Electrical Characteristics Parameter Repetitive peak off-state current On-state voltage Symbol IDRM VTM Min. -- -- Typ. -- -- Max. 2.0 1.8 Unit mA V Test conditions Tj = 150C, VDRM applied Tc = 25C, ITM = 7 A, Instantaneous measurement Gate trigger voltageNote2 VFGT VRGT VRGT -- -- -- -- -- -- 1.5 1.5 1.5 V V V Tj = 25C, VD = 6 V, RL = 6 , RG = 330 Gate trigger currentNote2 IFGT IRGT IRGT -- -- -- -- -- -- 30 30 30 mA mA mA Tj = 25C, VD = 6 V, RL = 6 , RG = 330 VGD Rth (j-c) 0.2/0.1 -- -- -- -- 4.9 V C/W Tj = 125C/150C, VD = 1/2 VDRM Junction to caseNote3 (dv/dt)c 5/1 -- -- V/s Tj = 125C/150C Gate non-trigger voltage Thermal resistance Critical-rate of rise of off-state Note4 commutating voltage Notes: 2. Measurement using the gate trigger characteristics measurement circuit. 3. The contact thermal resistance Rth (c-f) in case of greasing is 0.5C/W. 4. Test conditions of the critical-rate of rise of off-state commutating voltage is shown in the table below. Test conditions 1. Junction temperature Tj = 125C/150C 2. Rate of decay of on-state commutating current (di/dt)c = - 2.5 A/ms 3. Peak off-state voltage VD = 400 V R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Commutating voltage and current waveforms (inductive load) Supply Voltage Time Main Current (di/dt)c Time Main Voltage (dv/dt)c Time VD Page 2 of 7 BCR5PM-14LG Preliminary Performance Curves Maximum On-State Characteristics Rated Surge On-State Current 1 10 7 5 3 2 Tj = 150C 0 10 7 5 3 2 -1 Gate Voltage (V) Gate Trigger Voltage (Tj = tC) x 100 (%) Gate Trigger Voltage (Tj = 25C) 70 60 50 40 30 20 10 2 3 5 7 10 1 2 3 5 7 10 Conduction Time (Cycles at 60Hz) Gate Characteristics (I, II and III) Gate Trigger Current vs. Junction Temperature PG(AV) = 0.5W PGM = 5W IGM = 2A VGT = 1.5V 100 7 5 3 2 10 80 On-State Voltage (V) 5 3 2 VGM = 10V 101 7 5 3 2 90 0 0 10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -1 VGD = 0.1V 7 IFGT I IRGT I, IRGT III 5 101 2 3 5 7102 2 3 5 7103 2 3 5 7104 Gate Trigger Current (Tj = tC) x 100 (%) Gate Trigger Current (Tj = 25C) 10 Tj = 25C Surge On-State Current (A) 100 10 7 5 3 2 103 7 5 Typical Example IRGT III 3 2 102 7 5 2 IRGT I IFGT I 3 2 101 -60 -40-20 0 20 40 60 80 100 120 140 160 Gate Current (mA) Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to case) 3 10 7 5 Typical Example 3 2 102 7 5 3 2 1 10 -60 -40-20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Transient Thermal Impedance (C/W) On-State Current (A) 2 102 2 3 5 7103 2 3 5 7104 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 10-1 2 3 5 7100 2 3 5 7101 2 3 5 7102 Conduction Time (Cycles at 60Hz) Page 3 of 7 BCR5PM-14LG Preliminary 10 7 5 3 2 102 7 5 3 2 101 7 5 3 2 100 7 5 3 2 10-1 1 On-State Power Dissipation (W) 9 8 7 6 5 4 3 2 360 Conduction Resistive, inductive loads 1 0 0 10 2 3 5 7102 2 3 5 7103 2 3 5 7104 2 3 5 7105 1 2 3 4 5 6 7 8 9 10 Conduction Time (Cycles at 60Hz) RMS On-State Current (A) Allowable Case Temperature vs. RMS On-State Current Allowable Ambient Temperature vs. RMS On-State Current Curves apply regardless of conduction angle 140 120 100 80 60 40 360 Conduction 20 Resistive, inductive loads 0 0 1 2 3 4 5 6 7 160 Ambient Temperature (C) Case Temperature (C) 10 No Fins 160 140 60 x 60 x t2.3 120 100 x 100 x t2.3 80 60 40 Curves apply regardless All fins are black painted aluminum and greased of conduction angle 20 Resistive, inductive loads Natural convection 0 0 8 120 x 120 x t2.3 100 1 2 3 4 5 6 7 8 RMS On-State Current (A) RMS On-State Current (A) Allowable Ambient Temperature vs. RMS On-State Current Repetitive Peak Off-State Current vs. Junction Temperature 160 Ambient Temperature (C) Maximum On-State Power Dissipation 3 Natural convection No Fins Curves apply regardless of conduction angle Resistive, inductive loads 140 120 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 RMS On-State Current (A) R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 3.0 Repetitive Peak Off-State Current (Tj = tC) x 100 (%) Repetitive Peak Off-State Current (Tj = 25C) Transient Thermal Impedance (C/W) Maximum Transient Thermal Impedance Characteristics (Junction to ambient) 106 7 5 3 2 105 7 5 3 2 104 7 5 3 2 103 7 5 3 2 102 Typical Example -60 -40-20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) Page 4 of 7 BCR5PM-14LG Preliminary Holding Current vs. Junction Temperature 3 VD = 12V Distribution 3 2 Typical Example 101 7 5 3 2 Latching Current (mA) Holding Current (mA) 102 7 5 Latching Current vs. Junction Temperature T2+, G+ Typical Example T2-, G- Distribution 102 7 5 3 2 T2+, G- Typical Example 1 10 7 5 3 2 100 -60 -40-20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) Breakover Voltage vs. Junction Temperature Breakover Voltage vs. Rate of Rise of Off-State Voltage (Tj=125C) 160 Typical Example 140 120 100 80 60 40 20 0 -60 -40-20 0 20 40 60 80 100 120 140 160 Breakover Voltage (dv/dt = xV/s) x 100 (%) Breakover Voltage (dv/dt = 1V/s) Junction Temperature (C) 160 Typical Example Tj = 125C 140 120 100 80 60 III Quadrant 40 I Quadrant 20 0 1 10 2 3 5 7102 2 3 5 7103 2 3 5 7104 Junction Temperature (C) Rate of Rise of Off-State Voltage (V/s) Breakover Voltage vs. Rate of Rise of Off-State Voltage (Tj=150C) Commutation Characteristics (Tj=125C) 160 140 Typical Example Tj = 150C 120 100 80 60 III Quadrant 40 20 I Quadrant 0 1 10 2 3 5 7102 2 3 5 7103 2 3 5 7104 Rate of Rise of Off-State Voltage (V/s) R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Critical Rate of Rise of Off-State Commutating Voltage (V/s) Breakover Voltage (dv/dt = xV/s) x 100 (%) Breakover Voltage (dv/dt = 1V/s) Breakover Voltage (Tj = tC) x 100 (%) Breakover Voltage (Tj = 25C) 100 -60 -40-20 0 20 40 60 80 100 120 140 160 10 7 5 3 2 102 7 5 III Quadrant 3 2 101 7 5 I Quadrant 3 2 Minimum Characteristics Value Time Main Voltage (dv/dt)c VD Main Current (di/dt)c IT Time Typical Example Tj = 125C IT = 4A = 500s VD = 200V f = 3Hz 100 100 2 3 5 7101 2 3 5 7102 2 3 5 7103 Rate of Decay of On-State Commutating Current (A/ms) Page 5 of 7 BCR5PM-14LG Preliminary Gate Trigger Current vs. Gate Current Pulse Width 102 7 5 3 2 Time Main Voltage (dv/dt)c VD Main Current (di/dt)c IT Time Gate Trigger Current (tw) x 100 (%) Gate Trigger Current (DC) Critical Rate of Rise of Off-State Commutating Voltage (V/s) Commutation Characteristics (Tj=150C) Typical Example Tj = 150C IT = 4A = 500s VD = 200V f = 3Hz 1 10 7 5 I Quadrant 3 Minimum 2 Characteristics III Quadrant Value 0 10 0 1 2 3 10 2 3 5 710 2 3 5 710 2 3 5 710 Rate of Decay of On-State Commutating Current (A/ms) Typical Example IRGT III 3 IRGT I 2 102 7 5 IFGT I 3 2 101 0 10 2 3 5 7 101 2 3 5 7 102 Gate Current Pulse Width (s) Gate Trigger Characteristics Test Circuits 6 3 10 7 5 Recommended Circuit Values Around The Triac Load 6 C1 A 6V V Test Procedure I R1 A 6V 330 V C0 R0 330 Test Procedure II C1 = 0.1 to 0.47F C0 = 0.1F R1 = 47 to 100 R0 = 100 6 A 6V V 330 Test Procedure III R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Page 6 of 7 BCR5PM-14LG Preliminary Package Dimensions Package Name TO-220F JEITA Package Code SC-67 RENESAS Code PRSS0003AA-A Previous Code MASS[Typ.] 2.0g Unit: mm 10.5Max 2.8 17 8.5 5.0 1.2 5.2 3.20.2 13.5Min 3.6 1.3Max 0.8 2.54 0.5 2.6 4.5 2.54 Order Code Lead form Straight type Lead form Standard packing Vinyl sack Plastic Magazine (Tube) Quantity 100 50 Standard order code Type name Type name - Lead forming code Standard order code example BCR5PM-14LG BCR5PM-14LG-A8 Note : Please confirm the specification about the shipping in detail. R07DS0087EJ0300 Rev.3.00 Sep 16, 2010 Page 7 of 7 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0