90SQ... Series
PD-2.222 rev. B 12/97
2www.irf.com
VFM Max. Forward Voltage Drop (1) 0.48 V @ 9A
* See Fig. 1 0.57 V @ 18A
0.42 V @ 9A
0.52 V @ 18A
IRM Max. Reverse Leakage Current (1) 1.75 mA TJ = 25 °C
* See Fig. 2 7 0 mA TJ = 125 °C
CTMax. Junction Capacitance 900 p F VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C
LSTypical Series Inductance 10.0 nH Measured lead to lead 5mm from body
dv/dt Max. Voltage Rate of Change 10,000 V/ µ s
(Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated VR
Parameters 90SQ Units Conditions
Electrical Specifications
TJMax. Junction Temperature Range -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJL Max. Thermal Resistance Junction 8.0 °C/W DC operation * See Fig. 4
to Lead 1/8 inch lead leangth
RthJA Typical Thermal Resistance, 44 °C/W
Junction to Air
wt Approximate Weight 1.4(0.049) g (oz.)
Case Style DO - 204AR JEDEC
Thermal-Mechanical Specifications
Parameters 90SQ Units Conditions
(1) Pulse Width < 300µs, Duty Cycle < 2%
IF(AV) Max. Average Forward Current 9 A 50% duty cycle @ TC = 69° C, rectangular wave form
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive 2150 5µs Sine or 3µs Rect. pulse
Surge Current * See Fig. 7 340 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 12 mJ TJ = 25 °C, IAS = 1.8 Amps, L = 7.4 mH
IAR Repetitive Avalanche Current 1.8 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Parameters 90SQ Units Conditions
Absolute Maximum Ratings
AFollowing any rated
load condition and
with rated VRRM applied
Part number 90SQ035 90SQ040 90SQ045
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V) 35 40 45
Voltage Ratings