Technical Data Sheet 0603 Package Top Phototransiator PT19-315B/TR8 Features Fast response time High photo sensitivity Small junction capacitance Package in 8mm tape on 7" diameter reels. Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Description PT19-315B/TR8 is a phototransistor in miniature SMD package hich is molded in a water clear with flat top view lens. he device is Spectrally matched to visible and infrared emitting Applications Miniature switch Counters and sorter Position sensor Infrared applied system Device Selection Guide Device No. PT19-315B/TR8 1 Chip Material Silicon Lens Color Water clear Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 Package Dimensions Collector Emitter Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions 0.1mm Absolute Maximum Ratings (Ta=25) Parameter Collector-Emitter Voltage Emitter-Collector-Voltage Collector Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation at(or below) 25Free Air Temperature Symbol Rating Unit VCEO VECO IC Topr Tstg Tsol 30 5.5 20 -25 ~ +85 -40 ~ +100 260 V V mA Pc 75 mW Notes: *1:Soldering time5 seconds. 2 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 Electro-Optical Characteristics (Ta=25) Parameter Min. Typ. Max. Unit Condition 0.5 760 --- 1100 nm --- P --- 940 --- nm --- BVCEO 30 --- --- V BVECO 5 --- --- V VCE(sat) --- --- 0.4 V Collector Dark Current ICEO --- --- 100 nA On State Collector Current IC(ON) 0.1 0.6 --- mA Rise Time tr --- 15 --- Fall Time tf --- 15 --- Rang Of Spectral Bandwidth Wavelength Of Peak Sensitivity Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Saturation Voltage 3 Symbol Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 S Rev.3 IC=100 A Ee=0mW/cm2 IE=100 A Ee=0mW/cm2 IC=2mA Ee=1mW/cm2 VCE=20V Ee=0mW/cm2 VCE=5V Ee=1mW /cm2 P =940nm VCE=5V IC=1mA RL=1000 www.everlight.com DATASHEET PT19-315B/TR8 Typical Electrical/Optical/Characteristics Curves Collector Power Dissipation vs. Ambient Temperature Spectral Sensitivity 100 Relative Spectral Sensitivity 1.0 80 60 40 20 0.8 0.6 0.4 0.2 0 -25 25 0 50 75 85 100 Relative Collector Current vs. Ambient Temperature 0.0 300 400 500 600 700 800 Wavelength(nm) 900 1000 1100 Collector Current vs. Irradiance 10 160 C 2 140 1 120 100 0.1 80 60 0.01 40 20 0 0 10 20 30 40 50 60 70 0.001 0.01 0.1 1 10 2 4 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 Collector Dark Current vs. Ambient Temperature Response Time vs. Load Resistance 3.5 10 3.0 2.5 10 2.0 10 1.5 1.0 10 0.5 10 0 5 25 50 75 100 0 0 1 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 2 Rev.3 3 4 www.everlight.com DATASHEET PT19-315B/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Shelf life in sealed bag from the bag seal date: 12 months at < 40C and < 90% RH. 2.3 After opening the package, the Phototransiator must be kept at 30C and 60%RH, and used within a year. 2.4 If the moisture absorbent material (silica gel) has faded away or the Phototransiator have exceeded the storage time. Baking treatment is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the conditions : 605C for Min.24hrs. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the Phototransiator during heating. 3.4 After soldering, do not warp the circuit board. 6 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the Phototransiator have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the Phototransiator will or will not be damaged by repairing. 7 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 Package Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm 2. Carrier Tape Dimensions:(Quantity: 4000pcs/reel) Note: The tolerances unless mentioned is 0.1mm ,Unit = mm 8 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com DATASHEET PT19-315B/TR8 Packing Procedure Label Aluminum moistue-proof bag Desiccant Label Label Form Specification CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT's prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 9 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Jan.06.2017. Issue No: DPT-0000058 Rev.3 www.everlight.com