Rectangular Standard Proximity Sensor TL-N/TL-Q/TL-G CSM_TL-N_TL-Q_TL-G_DS_E_3_1 A Wealth of Models for All Types of Applications * Easy installation, high-speed pulse generator, high-speed rotation control, and more. * Direct mounted to metal (-N Models). * A wealth of models ideal for limit control, counting control, and other applications (-N Models). Be sure to read Safety Precautions on page 9. (excluding TL-G) Ordering Information Sensors DC 2-Wire Models Model Appearance Sensing distance Operation mode NO 17 x 17 Unshielded 25 x 25 5 mm 7 mm 30 x 30 12 mm 40 x 40 20 mm NC TL-Q5MD1 2M TL-Q5MD2 2M TL-N7MD1 2M TL-N7MD2 2M TL-N12MD1 2M TL-N12MD2 2M TL-N20MD1 2M TL-N20MD2 2M Note: Models with a different frequency are available to prevent mutual interference. The model numbers are TL-N@MD@5 and TL-Q5MD@5 (e.g., TL-N7MD15). DC 3-Wire and AC 2-Wire Models Model Appearance Sensing distance Output configuration Operation mode NO 8x9 17 x 17 25 x 25 TL-Q2MC1 2M 2 mm TL-Q5MC1 2M *2 TL-Q5MC2 2M DC 3-wire, NPN *1 TL-N5ME1 2M *2 TL-N5ME2 2M *1 AC 2-wire TL-N5MY1 2M TL-N5MY2 2M DC 3-wire, NPN *1 TL-N10ME1 2M *2 TL-N10ME2 2M *1 AC 2-wire TL-N10MY1 2M TL-N10MY2 2M DC 3-wire, NPN *1 TL-N20ME1 2M *2 TL-N20ME2 2M AC 2-wire TL-N20MY1 2M TL-N20MY2 2M DC 3-wire, NPN TL-G3D-3 1M 5 mm 5 mm 10 mm 40 x 40 Grooved -- DC 3-wire, NPN Unshielded 30 x 30 NC 20 mm 7.5 mm -- Note: Models with a different frequency are available to prevent mutual interference. Models numbers for Sensors with different frequencies are TL-@@M@@5 (example: TL-N5ME15). *1. Models are also available with 5-m cables. Add the cable length to the model number (example: TL-N5ME1 5M). *2. Models with robotics cables are also available. Add -R to the end of the model number (example: TL-N5ME1-R). 1 TL-N/TL-Q/TL-G Accessories (Order Separately) Mounting Brackets Type Model Y92E-C5 Mounting Brackets Mounting Brackets for Conduits Applicable Sensors Provided with these Sensors Order separately TL-N5ME@, TL-N7MD@ TL-N5MY@ Y92E-C10 TL-N10ME@, TL-N12MD@ TL-N10MY@ Y92E-C20 TL-N20ME@, TL-N20MD@ TL-N20MY@ Y92E-N5C15 --- TL-N5ME@, TL-N5MY@ Y92E-N10C15 --- TL-N10ME@, TL-N10MY@ Ratings and Specifications DC 2-Wire Models Item Model TL-Q5MD@ TL-N7MD@ TL-N12MD@ TL-N20MD@ Sensing distance 5 mm 10% 7 mm 10% 12 mm 10% 20 mm 10% Set distance 0 to 4 mm 0 to 5.6 mm 0 to 9.6 mm 0 to 16 mm Differential travel 10% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 5.) Standard sensing object Iron, 18 x 18 x 1 mm Response frequency * 500 Hz Power supply voltage (operating voltage range) 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Leakage current 0.8 mA max. Control output Iron, 30 x 30 x 1 mm Iron, 40 x 40 x 1 mm Iron, 50 x 50 x 1 mm 300 Hz Load current 3 to 100 mA Residual voltage 3.3 V max. (Load current: 100 mA, Cable length: 2 m) Indicators D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red) Operation mode (with sensing object approaching) D1 Models: NO D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. Protection circuits Load short-circuit protection, Surge suppressor Ambient temperature range Operating/Storage: -25 to 70C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of -25 to 70C Voltage influence 2.5% max. of sensing distance at rated voltage in the rated voltage 15% range Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant Connection method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 45 g Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions Approx. 145 g Approx. 170 g Approx. 240 g Case Materials Sensing surface Heat-resistant ABS Accessories Instruction manual Mounting Bracket, Instruction manual * The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2 TL-N/TL-Q/TL-G DC 3-Wire Models Item Model TL-Q2MC1 TL-Q5MC@ TL-G3D-3 Sensing distance 2 mm 15% 5 mm 10% 7.50.5mm Set distance 0 to 1.5 mm 0 to 4 mm 10 mm Differential travel 10% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 6.) Standard sensing object Iron, 8 x 8 x 1 mm Response time --- Iron, 15 x 15 x 1 mm Iron, 10 x 5 x 0.5mm 2 ms max. 1 ms max. Response frequency * 500 Hz Power supply voltage (operating 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. voltage range) 12 to 24 VDC, ripple (p-p): 5% max. Current consumption 15 mA max. at 24 VDC (no-load) 10 mA max. at 24 VDC 2 mA max. at 24 VDC (no-load) Load Concurrent trol output Residual voltage NPN open collector 100 mA max. at 30 VDC max. NPN open collector 50 mA max. at 30 VDC max. NPN transistor output 20 mA max. 1 V max. (under load current of 100 mA 1 V max. (under load current of 50 mA with cable length of 2 m) with cable length of 2 m) --- Indicators Detection indicator (red) --- Operation mode (with sensing object approaching) NO C1 Models: NO C2 Models: NC NO Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. Protection circuits Reverse polarity protection, Surge suppressor Ambient temperature range Operating/Storage: -10 to 60C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C 20% max. of sensing distance at 23C 10% max. of sensing distance at 23C in the temperature range of -10 to 60C in the temperature range of -25 to 70C in the temperature range of -10 to 55C Voltage influence 2.5% max. of sensing distance at rated voltage in rated voltage 10% range Insulation resistance 50 M min. (at 500 VDC) between cur5 M min. (at 500 VDC) between current-carrying parts and case rent-carrying parts and case Dielectric strength 1,000 VAC for 1 min between currentcarrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions Destruction: 200 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant IEC IP67 Connection method Pre-wired Models (Standard cable length: 2 m) Pre-wired Models (Standard cable length: 1m) Weight (packed state) Approx. 30 g Approx. 30 g Materials Surge suppressor Operating/Storage: -25 to 70C (with no icing or condensation) 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case Approx. 60 g IEC IP66 Case Sensing surface Accessories Heat-resistant ABS Instruction manual PPO --- * The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 3 TL-N/TL-Q/TL-G Item Model TL-N5ME@, TL-N5MY@ TL-N10ME@, TL-N10MY@ TL-N20ME@, TL-N20MY@ Sensing distance 5 mm 10% 10 mm 10% 20 mm 10% Set distance 0 to 4 mm 0 to 8 mm 0 to 16 mm Differential travel 15% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 6 and 7.) Standard sensing object Iron, 30 x 30 x 1 mm Response frequency *1 E Models: 500 Hz Y Models: 10 Hz Power supply voltage *2 (operating voltage range) E Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Y Models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz Current consumption E Models: 8 mA max. at 12 VDC, 15 mA max. at 24 VDC Leakage current Y Models: Refer to Engineering Data on page 5. Control output Iron, 40 x 40 x 1 mm E Models: 40 Hz Y Models: 10 Hz Load current E Models: 100 mA max. at 12 VDC, 200 mA max. at 24 VDC Y Models: 10 to 200 mA Residual voltage E Models: 1 V max. (load current: 200 mA) Y Models: Refer to Engineering Data on page 5. Indicators Operation mode (with sensing object approaching) Iron, 50 x 50 x 1 mm E Models: Detection indicator (red) Y Models: Operation indicator (red) E1/Y1 Models: NO E2/Y2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on page 8 for details. Protection circuits E Models: Reverse polarity protection, Surge suppressor Y Models: Surge suppressor Ambient temperature range Operating/Storage: -25 to 70C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of -25 to 70C Voltage influence E Models: 2.5% max. of sensing distance at rated voltage in rated voltage 10% range Y Models: 1% max. of sensing distance at rated voltage in rated voltage 10% range Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength E Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant Connection method Pre-wired Models (Standard cable length: 2 m) Weight (packed state) Approx. 145 g Materials Approx. 170 g Approx. 240 g Case Sensing surface Accessories Heat-resistant ABS E Models: Mounting Bracket, Instruction manual Y Models: Instruction manual *1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *2. E Models (DC switching models): A full-wave rectification power supply of 24 VDC 10% (average value) can be used. 4 TL-N/TL-Q/TL-G Engineering Data (Typical) Y X 4 TL-Q5M@@ TL-N@ME@ TL-N@MY@ Distance X (mm) Distance X (mm) TL-Q2MC1 Distance X (mm) Sensing Area 5 20 TL-N20 4 3 15 Y X 3 10 2 2 TL-N10 Y TL-N5 X 1 0 -8 5 1 -6 -4 -2 0 2 4 Sensing Head 0 6 Distance Y (mm) -8 -6 -4 -2 0 2 4 6 0 -25 -20 -15 -10 8 -5 0 5 10 TL-N5 Sensing Head TL-N10 Sensing Head TL-N20 Sensing Head Sensing Head Distance Y (mm) 15 20 Distance Y (mm) Leakage Current 20 TL-N@MY Leakage current (mA) Distance X (mm) TL-N@MD@ TL-N20MD@ 15 2.0 1.5 TL-N12MD@ 1.0 10 Y TL-N7MD@ mA X 5 Protective resistance AC power 50/60 Hz V 0.5 Proximity Sensor (output OFF) 0 -25 -20 -15 -10 -5 0 5 10 TL-N7MD@ Sensing Head TL-N12MD@ Sensing Head TL-N20MD@ Sensing Head 15 0 20 Distance Y (mm) 80 100 120 140 160 180 200 220 240 260 Power supply voltage (V) 5 4 TL-N@MY at 100 VAC TL-N@MY at 200 VAC Load voltage VL (V) Residual output voltage (V) TL-N@MD Load voltage VL (V) Residual Output Voltage Residual output voltage 100 ON 80 3 ON 160 V V 120 60 2 A 40 1 100 VAC 3 5 10 30 50 100 300 500 1,000 Load current (mA) 0 A 80 200 VAC 40 20 Residual load voltage 0 Residual output voltage 200 3 5 10 20 OFF 30 50 100 200 Load current (mA) Residual load voltage 0 3 5 10 20 50 OFF 100 200 Load current (mA) 5 TL-N/TL-Q/TL-G Thickness of Sensing Object vs. Sensing Distance Sensing Object Size vs. Sensing Distance TL-G3D-3 TL-Q5MC@ TL-G3D-3 d 9 1 mm l Distance X (mm) d = 5 mm R = 10 mm X Distance X (mm) Distance X (mm) v Operate Reset 7 t = 1 mm 6 5 l = 5 mm t= 0.5 mm X 10 dx d l 1 mm 9 dx d 4 X 8 8 Operate 3 Reset 7 2 7 1 0.01 0.1 1.0 10 Thickness of sensing object: t (mm) 0 10 0 20 30 40 Side length of sensing object: d (mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Side length of sensing object: d (mm) Influence of Sensing Object Size and Material 4 dx d X 3 6 TL-N5@ dx d X 5 Iron 4 2 Distance X (mm) TL-Q5M@@ Distance X (mm) Distance X (mm) TL-Q2MC1 Stainless steel (SUS304) Iron 2 Stainless steel (SUS304) 2 Aluminum Aluminum 1 1 Brass 0 5 10 dx d X t = 1 mm 8 Iron Distance X (mm) TL-N12MD@ 10 14 dx d 12 10 20 30 40 50 60 70 80 Side length of sensing object: d (mm) TL-N20MD@ t = 1 mm X 0 15 20 25 30 35 40 45 Side length of sensing object: d (mm) Iron 10 Distance X (mm) 20 30 40 50 60 Side length of sensing object: d (mm) TL-N7MD@ Distance X (mm) Iron 4 Brass Copper Aluminum 10 5 3 Brass 0 t = 1 mm X 3 Stainless steel (SUS304) 1 dx d 6 24 dx d X 20 t = 1 mm Iron 16 6 8 Stainless steel (SUS304) Stainless steel (SUS304) 6 4 8 Copper 4 2 10 20 30 40 50 60 Side length of sensing object: d (mm) 0 Copper Aluminum Copper Aluminum 4 Aluminum 0 Brass Brass Brass 2 Stainless steel (SUS304) 12 10 20 30 40 50 60 Side length of sensing object: d (mm) 0 10 20 30 40 50 60 Side length of sensing object: d (mm) 6 TL-N/TL-Q/TL-G TL-N20@ dx d X 10 t = 1 mm Distance X (mm) Distance X (mm) TL-N10@ Iron 22 dx d t = 1 mm Iron X 20 18 16 8 14 6 12 Stainless steel (SUS304) 4 Stainless steel (SUS304) 10 8 Brass Brass 6 Aluminum 2 Aluminum 4 2 0 10 20 0 30 40 50 60 70 80 Side length of sensing object: d (mm) 10 20 30 40 50 60 70 80 Side length of sensing object: d (mm) I/O Circuit Diagrams DC 2-Wire Models Operation mode Model Timing chart Output circuit Unstable Set position Stable sensing Non-sensing sensing area area area Proximity Sensor Sensing object NO TL-Q5MD1 TL-N7MD1 TL-N12MD1 TL-N20MD1 (%) 100 80 (TYP) 0 Rated sensing distance ON OFF ON OFF Setting indicator (green) ON Control output OFF Sensing area Non-sensing area Sensing object NC (%) 100 Load +V Proximity Sensor main circuit Blue Proximity Sensor TL-Q5MD2 TL-N7MD2 TL-N12MD2 TL-N20MD2 Brown Operation indicator (red) 0V Note: The load can be connected to either the +V or 0 V side. 0 Rated sensing distance ON Operation indicator OFF (red) ON Control output OFF 7 TL-N/TL-Q/TL-G DC 3-Wire Models Operation mode Model Timing chart Output circuit Present Sensing object Not present NO TL-Q2MC1 TL-Q5MC1 ON Output transistor (load) OFF Brown ON Detection indicator (red) OFF Load Proximity Sensor main circuit Black* Output Present Sensing object Blue Not present NC TL-Q5MC2 ON Output transistor (load) OFF Detection indicator (red) OFF TL-N5ME1 TL-N10ME1 TL-N20ME1 0V * Load current: 100 mA max., TL-Q2MC1 Load current: 50 mA max., TL-Q5MC1 ON Present Sensing object NO +V 100 Not present Load (between brown and black leads) Operate Brown Reset Output voltage (between black and blue leads) Load Low ON Detection indicator (red) +V 100 High Proximity Sensor main circuit OFF 4.7 k *1 Black 2.2 Output *2 Tr Present Sensing object NC TL-N5ME2 TL-N10ME2 TL-N20ME2 Not present Blue 0V Operate Load (between brown and black leads) Reset Output voltage (between black and blue leads) *1. Load current: 200 mA max. *2. When a transistor is connected. High Low ON Detection indicator (red) OFF Brown +V Load Proximity Sensor main circuit Present Transistor output Sensing object Not present TL-G3D-3 Output transistor (load) ON Black* Output OFF Blue 0V * Load current: 20 mA max. AC 2-Wire Models Operation mode Model Timing chart Sensing object NO TL-N5MY1 TL-N10MY1 TL-N20MY1 Output circuit Present Not present Load Operate Reset Operation indicator (red) Brown Load ON OFF Proximity Sensor main circuit Sensing object NC TL-N5MY2 TL-N10MY2 TL-N20MY2 Present Blue Not present Load Operate Reset Operation indicator (red) ON OFF 8 TL-N/TL-Q/TL-G Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. * Do not short-circuit the load, otherwise the Sensor may be damaged. * Do not supply power to the Sensor with no load, otherwise the Sensor may be damaged. Applicable Models: AC 2-Wire Models Precautions for Correct Use Do not use this product under ambient conditions that exceed the ratings. Design Influence of Surrounding Metal Mutual Interference When mounting the Sensor within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these distances may cause deterioration in the performance of the Sensor. Rectangular Models TL-N*2 When installing Sensors face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. Parallel Face-to-face A TL-Q B A B *1 *1 B A Influence of Surrounding Metal (Unit: mm) Model TL-Q5M@@ TL-N7MD@ TL-N12MD@ TL-N20MD@ TL-N5ME@, TL-N5MY@ TL-N10ME@, TL-N10MY@ TL-N20ME@, TL-N20MY@ Distance A 20 40 50 70 20 40 80 B *1 20 35 40 60 23 30 45 Mutual Interference (Unit: mm) Model TL-Q5MC@ TL-Q5MD@ TL-N7MD@ TL-N12MD@ TL-N20MD@ TL-N5ME@ TL-N5MY@ TL-N10ME@, TL-N10MY@ TL-N20ME@, TL-N20MY@ Grooved Model B A Mutual Interference (Unit: mm) * The mounting plate must be a nonferrous metal. TL-Q2MC1 B Influence of Surrounding Metal (Unit: mm) Model TL-Q2MC1 B* 120 (60) 120 (80) 120 (60) 200 (100) 200 (100) 80 (40) 90 (40) 120 (60) 120 (60) B TL-Q2MC1 Mounting plate* 3 mm A* 60 (17) 60 (30) 100 (50) 120 (60) 200 (100) 80 (40) 80 (40) 120 (60) 200 (100) * Values in parentheses apply to Sensors operating at different frequencies. *1. Dimension B is the same value as the value on the sides and the top. (The construction is symmetric around a point.) *2. The values for A or B for the TL-N apply when there is metal on only one side of the sensor. If there is metal on two or more sides, the value must be multiplied by two or more. A Distance Distance Model TL-Q2MC1 Distance Grooved Model A 12 B 3 A 30 (8) B 90 (45) B A Mutual Interference (Unit: mm) A Model TL-G3D-3 B Distance A 31 B 25 Influence of Surrounding Metal (Unit: mm) Model TL-G3D-3 Distance A 11 B 17 9 TL-N/TL-Q/TL-G Designing the Sensing Object for TL-G3D-3 Grooved Model For high-speed response to a toothed metal plate, the sensing objects must be at least the size of the standard sensing object and there must be sufficient distance between sensing objects. The response frequency for a toothed wheel like the one shown at the right is 1 kHz min. The response frequency will be reduced if the wheel is smaller or the width of the teeth or the distance between the teeth is reduced. Adjustment Sensing Object Passing Position for the TL-G3D-3 Grooved Model The gap between the sensing object and the bottom of the groove must be 1 mm or less. 15 min. 5 10 min. Material: Iron t = 0.5 mm Sensing object 1 mm max. Mounting When tightening the mounting screws, do not exceed the torque in the following table. Model TL-Q2MC1 TL-Q5M@@ TL-N@M@@ TL-G3D-3 Torque 0.59 N*m 0.9 to 1.5 N*m 2 N*m (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. Sensors TL-Q2MC1 1 * 6 Detection indicator (red) Sensing surface 3.2-dia. mounting hole 18.50.2 8 8 9 2.5 25 28 * 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.15 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m TL-Q5M@@ 32 max. 28 17 Mounting Hole Dimensions 3.5 *1 17 10.50.1 3 16 Two, 3.3 dia. Indicators *2 10.50.1 Two, 3.3-dia. holes *1. C Models: 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.2 mm), Standard length: 2 m D Models: 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m *2. C Models: Detection indicator (red) D Models: Operation indicator (red), Setting indicator (green) 10 TL-N/TL-Q/TL-G TL-G3D-3 21 1.5 9.3 * 0.5 21 10 dia. 18.1 0.5 30.3 Mounting Hole Dimensions Toothed washer Lock nut M8 x 0.75 (slightly thin) 11-dia. Hole Two, 3.6-dia. holes 15 3 * 4-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.2 mm2, Insulator diameter: 1.2 mm), Standard length: 1 m 29.8 TL-N7MD@, TL-N5ME@ 35 Two, 4.3 dia. 180.45 25 6 23.8 Indicator *2 Rubber bushing Mounting Hole Dimensions 25 Two, 4.5-dia. or M4 holes 17.60.2 18.5 *1 0.5 180.2 38.5 1.5 *1. D Models: 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m E Models: 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red) E Models: Detection indicator (red) TL-N5MY@ 46.3 TL-N12MD@, TL-N10ME@, TL-N10MY@ Two, 4.3 dia. 49 25 Two, 4.3 dia. 180.45 30 6.2 34.1 220.45 Operation indicator (red) 7.7 Mounting Hole Dimensions Indicator *2 Rubber bushing Two, 4.5-dia. or M4 holes 25 18.5 * 180.2 35.8 0.5 50 1.5 * 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m Mounting Hole Dimensions Rubber bushing 30 21.5 *1 Two, 4.5-dia. or M4 holes 0.5 220.2 52.5 1.5 *1. D/Y Models: 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m E Models: 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. D1 Models: Operation indicator (red) and Setting indicator (green) D2 Models: Operation indicator (red) E Models: Detection indicator (red) Y Models: Operation indicator (red) 11 TL-N/TL-Q/TL-G TL-N20MD@, TL-N20ME@, TL-N20MY@ Mounting Hole Dimensions 47 Two, 5.5 dia. Two, 5.5-dia. or M5 holes 300.45 40 300.2 8 Indicator *2 31.8 Rubber bushing *1 40 30 53 1 *1. D/Y Models: 6-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m E Models: 6-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m *2. D1 Models: Operation indicator (red) and Setting indicator (green) D2 Models: Operation indicator (red) E Models: Detection indicator (red) Y Models: Operation indicator (red) Accessories (Order Separately) Mounting Bracket Y92E-C20 Y92E-C10 Y92E-C5 34 32 Two, M4 20 20 3.5 Two, M4 19.5 6 5.5 18 4.5 Two, M5 35 4 4.5 *1 12 25 180.2 0.2 *1 160.2 220.2 30 300.2 *1 220.2 40 9 6.5 2.3 7 9.5 2.3 14.5 3.2 Applicable Models: TL-N5ME@ *2 Applicable Models: TL-N5MY@ Applicable Models: TL-N7MD@ *2 Material: Zinc-plated iron Applicable Models: TL-N10ME@ *2 Applicable Models: TL-N10MY@ Applicable Models: TL-N12MD@ *2 Material: Zinc-plated iron 24 Applicable Models: TL-N20ME@ *2 Applicable Models: TL-N20MY @ Applicable Models: TL-N20MD@ *2 Material: Zinc-plated iron *1. These are the mounting dimensions of the base of the Mounting Bracket. *2. Provided with the product. Mounting Brackets for Wiring Conduit Use (Sold Separately) Y92E-N10C15 Y92E-N5C15 18 2.3 25 180.3 110.2 Two, 4.3 dia. 21 3.5 2.3 30 220.3 130.2 Two, 4.3 dia. 3.5 5.5 24.3 5 23.8 2.3 C15 conduit screw, JIS-B-0204 Applicable Models: TL-N5ME@ Applicable Models: TL-N5MY@ Applicable Models: TL-N7MD@ Material: Zinc-plated iron 2.3 C15 conduit screw, JIS-B-0204 Applicable Models: TL-N10ME@ Applicable Models: TL-N10MY@ Applicable Models: TL-N12MD@ Material: Zinc-plated iron 12 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved.