RSA3000 Series Real-time Spectrum Analyzer Ultra-Real technology Frequency: up to 4.5 GHz Displayed average noise level (DANL): <-161 dBm (typical) Phase noise: <-102 dBc/Hz (typical) Level measurement uncertainty: <1.0 dB 4.5 GHz tracking generator Min. RBW 1 Hz EMC filter and quasi-peak detector kit (optional) Various measurement functions Multiple measurement modes Up to 40 MHz real-time analysis bandwidth Multiple trigger modes and trigger masks Density, Spectrogram, and other display modes PC software options 10.1'' capacitive multi-touch screen; supporting touch gestures USB, LAN, HDMI and other communication and display interfaces RIGOL TECHNOLOGIES, INC. RSA3000 Series Real-time Spectrum Analyzer Product Dimensions: Width x Height x Depth = 410 mm x 224 mm x 135 mm Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in the analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram, Density, and PVT. Besides, FMT function is also available. The Ultra-Real technology has the following features: Seamless analysis I/Q data acquisition in the analysis bandwidth Seamless spectrum analysis Seamless FMT Frequency mask trigger (FMT) to trigger the measurement by sporadic or transient events in the spectrum Composite displays for gap-free display of the spectrum Density for you to visualize how frequently signals occur Spectrogram RIGOL 1 Specifications Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 to 50 temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurement uncertainty. Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25). This data is not warranted and does not include the measurement uncertainty. Nominal: the expected mean or average performance or a designed attribute (such as the 50 connector). This data is not warranted and is measured at room temperature (approximately 25). Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude drift variation with time. This data is not warranted and is measured at room temperature (approximately 25). NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specifications (except the tracking generator specifications) listed in this manual are those when the tracking generator is off. Measurement Mode Measurement Mode General-Purpose Spectrum Analyzer (GPSA) Real-time Spectrum Analyzer (RTSA) All Measurement Modes Frequency RSA3030 Frequency Range 9 kHz to 3.0 GHz RSA3030-TG RSA3045 RSA3045-TG 9 kHz to 4.5 GHz Internal Reference Frequency Reference Frequency 10 MHz Accuracy Initial Calibration Accuracy Temperature Stability Aging Rate [(time since last calibration x aging rate) + temperature stability + calibration accuracy] Standard <1 ppm Option OCXO-C08 <0.1 ppm 0 to 50 , with the reference 25 Standard <0.5 ppm Option OCXO-C08 <0.005 ppm Standard <1 ppm/year Option OCXO-C08 <0.03 ppm/year RIGOL 2 GPSA Mode Frequency Frequency Readout Accuracy Marker Frequency Resolution span/(number of sweep points - 1) Marker Frequency Uncertainty (marker frequency readout x reference frequency accuracy + 1% x span + 10% x resolution bandwidth + marker frequency resolution) Frequency Counter Resolution 1 Hz Uncertainty (marker frequency readout x reference frequency accuracy + counter resolution) Frequency Span Range Standard 0 Hz, 100 Hz to maximum frequency Option RSA3000-BW1 0 Hz, 10 Hz to maximum frequency Resolution 2 Hz Uncertainty span/(number of sweep points - 1) SSB Phase Noise 20 to 30fc = 500 MHz Carrier Offset 1 kHz <-90 dBc/Hz (typical) 10 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical) 100 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical) 1 MHz <-110 dBc/Hz, <-112 dBc/Hz (typical) Residual FM 20 to 30 , RBW = VBW = 1 kHz Residual FM <10 Hz (nominal) Bandwidth Set "Sweep Time Rule" to "Accy" Resolution Bandwidth (-3 dB)[1] Standard 10 Hz to 3 MHz, in 1-3-10 sequence Option RSA3000-BW1 1 Hz to 10 MHz, in 1-3-10 sequence RBW Accuracy <5% (nominal) Resolution Filter Shape Factor (60 dB: 3 dB) <5 (nominal) Video Bandwidth (-3 dB) 1 Hz to 10 MHz, in 1-3-10 sequence Resolution Bandwidth (-6 dB) (Option RSA3000200 Hz, 9 kHz, 120 kHz, 1 MHz EMC) Note: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 10 MHz. RIGOL 3 Amplitude Measurement Range fc 10 MHz Range DANL to +30 dBm Maximum Safe Input Level[1] DC Voltage 50 V +30 dBm, attenuation 40 dB, preamp off. CW RF Power -10 dBm, attenuation = 20 dB, preamp on. Maximum Damage Level CW RF Power +33 dBm (2 W) Displayed Average Noise Level (DANL) RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation = 0 dB, sample detector, trace averages 50, tracking generator off, normalized to 1 Hz, 20 to 30, input impedance = 50 . Preamp off 9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical) 100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical) 20 MHz to 2.7 GHz <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical) 2.7 GHz to 3.0 GHz <-136 dBm, <-141 dBm (typical) <-136 dBm, <-141 dBm (typical) 3.0 GHz to 4.5 GHz Preamp on <-136 dBm, <-140 dBm (typical) 100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical) 20 MHz to 2.7 GHz <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical) 2.7 GHz to 3.0 GHz <-156 dBm, <-161 dBm (typical) <-156 dBm, <-161 dBm (typical) 3.0 GHz to 4.5 GHz <-154 dBm, <-159 dBm (typical) Note: [1] When fc < 10 MHz, the maximum safe input level is decreased. RIGOL 4 Level Display Logarithmic Scale 1 dB to 200 dB Linear Scale 0 to reference level Number of Display Points 801 Number of Traces 6 Trace Detector normal, pos-peak, neg-peak, sample, RMS average, voltage average, and quasi-peak (Option RSA3000-EMC) Trace Function clear write, max hold, min hold, average, view, blank Scale Unit dBm, dBmV, dBV, nV, V, mV, V, nW, W, mW, W Frequency Response RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation = 10 dB, relative to 50 MHz, 20 to 30 Preamp off 100 kHz to 3.0 GHz <0.7 dB, <0.5 dB (typical) 3.0 GHz to 4.5 GHz <0.7 dB, <0.5 dB (typical) <0.9 dB, <0.5 dB (typical) attenuation = 0 dB, relative to 50 MHz, 20 to 30 Preamp on RIGOL 5 100 kHz to 3.0 GHz 3.0 GHz to 4.5 GHz <1.0 dB, <0.5 dB (typical) <1.0 dB, <0.5 dB (typical) <1.2 dB, <0.5 dB (typical) Input Attenuation Switching Uncertainty Setting Range Switching Uncertainty 0 dB to 50 dB, in 1 dB step fc = 50 MHz, relative to 10 dB, preamp off, 20 to 30 <0.3 dB Absolute Amplitude Accuracy fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20 to 30 Uncertainty <0.3 dB Reference Level Range Logarithmic Scale -170 dBm to +30 dBm, in 0.01 dB step Linear Scale 707 pV to 7.07 V, 0.11% (0.01 dB) resolution RBW Switching Set "Sweep Time Rule" to "Accy", relative to 30 kHz RBW Uncertainty 1 Hz to 1 MHz <0.1 dB 3 MHz, 10 MHz <0.3 dB Preamp (Option RSA3000-PA) RSA3030 Frequency Range 100 kHz to 3.0 GHz Gain 20 dB (nominal) RSA3030-TG RSA3045 RSA3045-TG 100 kHz to 4.5 GHz Level Measurement Uncertainty 95% confidence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamp off, attenuation = 10 dB, -50 dBm < input level 0 dBm, fc > 10 MHz, 20 to 30 Level Measurement Uncertainty 1.0 dB (nominal) RIGOL 6 RF Input VSWR RSA3030 RSA3030-TG RSA3045 RSA3045-TG attenuation 10 dB, preamp off VSWR 300 kHz to 3.0 GHz <1.6 (nominal) <1.6 (nominal) 3.0 GHz to 4.5 GHz <1.8 (nominal) Distortion Second Harmonic Intercept (SHI) Third-order Intercept (TOI) fc 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off. +45 dBm fc 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB, preamp off. +10 dBm, +15 dBm (typical) 1 dB Gain Compression (P1dB)[1] fc 50 MHz, attenuation = 0 dB, preamp off 0 dBm (norminal) Spurious Response Residual Response input terminated with a 50 load, attenuation = 0 dB, 20 to 30 <-90 dBm, <-100 dBm (typical) Intermediate Frequency <-60 dBc System-related Sideband referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO, referenced to harmonic of first LO <-60 dBc Input-related Spurious mixer level = -30 dBm <-60 dBc Note: [1] The frequency interval of the two-tone signals should be greater than 10 MHz. RIGOL 7 Sweep Sweep Sweep Time Sweep Time Uncertainty span 10 Hz 1 ms to 4,000 s zero span 1 s to 6,000 s span 10 Hz, RBW 1 kHz 5% (nominal) zero span (sweep time > 1 ms) 5% (nominal) Sweep Mode continue, single Trigger Trigger Trigger Source Trigger Delay free run, external 1, external 2, video span 10 Hz 0 to 500 ms zero span 0 to 500 ms Tracking Generator Tracking Generator Output RSA3030 RSA3030-TG RSA3045 RSA3045-TG Frequency Range - 100 kHz to 3.0 GHz - 100 kHz to 4.5 GHz Output Level Range - -40 dBm to 0 dBm - -40 dBm to 0 dBm Output Level Resolution - 1 dB - 1 dB 3 dB (nominal) - 3 dB (nominal) Output Flatness relative to 50 MHz - RIGOL 8 RTSA Mode 10 MHz Real-time Analysis Bandwidth 25 MHz (Option RSA3000-B25) 40 MHz (Option RSA3000-B40) maximum span, default Kaiser Window Min. Signal Duration for 100% POI at the Full-Scale Accuracy 9.3 s 7.82 s (Option RSA3000-B25) 7.45 s (Option RSA3000-B40) Trace Detector pos-peak, neg-peak, sample, average Number of Traces 6 Window Type Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian provides 6 RBWs for each window, except the Rectangular; for Kaiser window Resolution Bandwidth Span Min. bandwidth Max. bandwidth 40 MHz 100 kHz 3.21 MHz 25 MHz 62.8 kHz 2.01 MHz 10 MHz 25.1 kHz 804 kHz 1 MHz 2.51 kHz 80.4 kHz 100 kHz 251 Hz 8.04 kHz Max. Sample Rate 51.2 Msa/s FFT Rate 146,484/s (norminal) Number of Markers 8 Amplitude Resolution 0.01 dB Frequency Point 801 Acquisition Time Max. sample rate >156.5 s Min. Signal Duration for 100% POI at Different RBWs Duration Time (s) Span RBW1 RBW2 RBW3 RBW4 RBW5 RBW6 40 GHz 26.9 16.9 11.9 9.32 8.07 7.45 25 MHz 38.9 22.9 14.9 10.9 8.82 7.82 10 MHz 86.8 46.8 26.8 16.8 11.8 9.30 1 MHz 807 407 207 107 56.3 31.3 Amplitude Amplitude Flatness <0.5 dB[1] (nominal) SFDR <-50 dBc/Hz (typical) Density Probability Range 0 to 100% (with a step of 0.1%) Min. Span 5 kHz Persistence Duration 32 ms to 10 s Spectrogram History Depth 8,192 Dynamic Range Covered by Bitmap 200 dB Color PVT Min. Acquisition Time 187.9 s Max. Acquisition Time 40 s Trigger Trigger Source free run, external 1, external 2, power, FMT FMT Trigger Diagram density, spectrogram, normal, PVT Trigger Resolution 0.5 dB (nominal) Trigger Criteria enter, leave, inside, outside, enter-leave, leave-enter Note:[1] Only applicable to the Normal measurement. RIGOL 9 General Specifications Display Type capacitive multi-touch screen Resolution 1024 x 600 pixels Size 10.1'' Color 24-bit color Printer Supported Protocol network printer Mass Memory Mass Memory Internal Storage 512 MB (nominal) External Storage USB storage device (not supplied) Power Input Voltage Range, AC 100 V to 240 V (nominal) AC Frequency 45 Hz to 440 Hz Power Consumption 55 W (typical), max. 90 W with all options Environment Temperature Humidity Altitude Operating Temperature Range 0 to 50 Storage Temperature Range -20 to 70 0 to 30 95% RH 30 to 40 75% RH Operating Height below 3,048 m (10,000 feet) Electromagnetic Compatibility and Safety complies with EMC Directive 2014/30/EU, complies with or above the standard specified in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A CISPR 11/EN 55011 IEC 61000-4-2:2008/EN 4.0 kV (contact discharge), 8.0 kV (air discharge) 61000-4-2 IEC 61000-4-3:2002/EN 3V/m (80 MHz to 1 GHz); 3V/m (1.4 GHz to 2 GHz); 1V/m (2.0 GHz to 2.7 GHz) 61000-4-3 EMC IEC 61000-4-4:2004/EN 1 kV power 61000-4-4 IEC 61000-4-5:2001/EN 0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage); 61000-4-5 1 kV (neutral-to-earth voltage) IEC 61000-4-6:2003/EN 3 V, 0.15 to 80 MHz 61000-4-6 IEC 61000-4-11:2004/ voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles EN 61000-4-11 short interruption: 0% UT during 250 cycles Safety complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16 and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2 Environmental Stress Samples of this product have been type tested in accordance with RIGOL's reliability test regulations and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, and vibration. The test methods are compliant with standards specified in GB/T6587 Class 2 and MILPRF-28800F Class 3. Size (W x H x D) 410 mm x 224 mm x 135 mm (16.14'' x 8.82'' x 5.32'') Weight Without Tracking Generator 4.65 kg (10.25 lb) With Tracking Generator 4.95 kg (10.91 lb) Calibration Interval Recommended Calibration Interval 18 months RIGOL 10 Input/Output Front Panel Connector RF Input TG Output Impedance 50 (nominal) Connector N-type female Impedance 50 (nominal) Connector N-type female Frequency 10 MHz Output Level +3 dBm to +10 dBm, +7 dBm (typical) Impedance 50 (nominal) Connector BNC female Frequency 10 MHz 5 ppm Input Level 0 dBm to +10 dBm Impedance 50 (nominal) Connector BNC female Impedance 1 k (nominal) Connector BNC female Level 5 V TTL level Internal/External Reference Internal Reference External Reference External Trigger Input/Output External Trigger Input 1 Impedance External Trigger Input 2/Trigger Output on trigger input 1 k (nominal) on trigger output 50 (nominal) Connector BNC female Level 5 V TTL level Frequency 430 MHz 20 MHz (nominal) IF Output RF input power (PRFin) -10 dBm, attenuation = 0, preamp off. IF Output Amplitude 50MHz, PRFin 4 dB (nominal) other frequency, PRFin 4 dB + RF frequency response (nominal) Impedance 50 (nominal) Connector SMB male Connector A plug Protocol version 2.0 Connector B plug Protocol version 2.0 Connector 100/1000Base, RJ-45 Protocol LXI Core 2011 Device Connector A plug Protocol HDMI 1.4b Communication Interface USB Host (4 ports) USB Device LAN HDMI RIGOL 11 Order Information Model Standard Accessories Option Optional Accessories Description Order No. Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz RSA3030 Real-time Spectrum Analyzer, 9 kHz to 4.5 GHz RSA3045 Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz (with TG installed when leaving the factory) RSA3030-TG Real-time Spectrum Analyzer, 9 kHz to 4.5 GHz (with TG installed when leaving the factory) RSA3045-TG Quick Guide (hard copy) - Power Cord - Preamplifier (PA) RSA3000-PA High Stability Clock OCXO-C08 RBW 1 Hz to 10 MHz RSA3000-BW1 Real-time Analysis Bandwidth 25 MHz RSA3000-B25 Real-time Analysis Bandwidth 40 MHz RSA3000-B40 Advanced Measurement Kit RSA3000-AMK EMC Filter and Quasi-Peak Detector Kit RSA3000-EMC Spectrum Analyzer PC Software Ultra Spectrum EMI Pre-compliance Test Software S1210 EMI Precompliance Software Include: N-SMA cable, BNC-BNC cable, N-BNC adaptor, N-SMA adaptor, 75 -50 adaptor, 900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz antenna (2pcs) DSA Utility Kit Include: N(F)-N(F) adaptor (1pcs), N(M)-N(M) adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs), N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F) adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs), BNC T type adaptor (1pcs), 50 SMA load (1pcs), 50 BNC impedance adaptor (1pcs) RF Adaptor Kit Include: 50 to 75 adaptor (2pcs) RF CATV Kit Include: 6 dB attenuator (1pcs), 10 dB attenuator (2pcs) RF Attenuator Kit 30 dB high-power attenuator, with the max power of 100 W ATT03301H N(M)-N(M) RF Cable CB-NM-NM-75-L-12G N(M)-SMA(M) RF Cable CB-NM-SMAM-75-L-12G VSWR Bridge, 1 MHz to 3.2 GHz VB1032 VSWR Bridge, 2 GHz to 8 GHz VB1080 Near-field Probe NFP-3 Rack Mount Kit RM6041 USB Cable CB-USBA-USBB-FF-150 Warranty Three years for the mainframe HEADQUARTER RIGOL TECHNOLOGIES, INC. No.8 Keling Road, New District,Suzhou, JiangSu,P.R.China Tel:+86-400620002 Email:info@rigol.com RIGOL(R) is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.com 1/18