IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Outtput, with Internal RBE (Single, Dual, Quad Channel) FEATURES Single Channel A 1 6 B C 2 5 C NC 3 4 E * Internal RBE for high stability * Four available CTR categories per package type * BVCEO > 60 V * Standard DIP packages Dual Channel Quad Channel A 1 8 E C 2 7 C C 3 6 C A 4 5 E A 1 16 E C 2 15 C C 3 14 C * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DESCRIPTION IL66, ILD66, and ILQ66 are optically coupled isolators employing gallium arsenide infrared emitters and silicon photodarlington detectors. Switching can be accomplished while maintaining a high degree of isolation between driving and load circuits, with no crosstalk between channels. A 4 13 E AGENCY APPROVALS A 5 12 E * UL1577, file no. E52744 system code H, double protection C 6 11 C * cUL tested to CSA 22.2 bulletin 5A C 7 10 C A 8 9 E * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 * BSI IEC 60950; IEC 60065 i179015-4 ORDERING INFORMATION I L x 6 6 - PART NUMBER # X CTR BIN 0 # # PACKAGE OPTION TAPE AND REEL x = D (Dual) or Q (Quad) DIP-# Option 6 7.62 mm 10.16 mm T Option 7 > 0.1 mm > 0.7 mm SINGLE CHANNEL DUAL CHANNEL AGENCY CERTIFIED/PACKAGE Option 9 QUAD CHANNEL CTR (%) 2 mA UL, cUL, BSI 100 300 DIP-4 IL66-1 IL66-2 DIP-8 - - 0.7 mA 2 mA 500 100 300 400 500 - - - - - - ILD66-2 ILD66-4 - - - - 300 SMD-8, option 7 - - - ILD66-4X007T - - - SMD-8, option 9 - - - ILD66-4X009 - - - - DIP-16 - - - - ILQ66-1 ILQ66-2 ILQ66-3 ILQ66-4 SMD-16, option 7 - - - - - - - ILQ66-4X007T SMD-16, option 9 - - - - - - - ILQ66-4X009T 100 300 300 500 100 300 400 500 VDE, UL, cUL, BSI DIP-4, 400 mil, option 6 IL66-1X016 DIP-16 Note * Additional optiony may be possible, please contact sales office. Rev. 1.7, 08-Jun-11 ILQ66-4X001 1 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT VRM 6.0 V IF 60 mA INPUT Peak reverse voltage Forward continuous current Power dissipation Pdiss Derate linearly from 25 C 100 mW 1.33 mW/C OUTPUT Power dissipation Pdiss Derate from 25 C 150 mW 2.0 mW/C COUPLER Isolation test voltage t = 1.0 s Total package power dissipation VISO 5300 VRMS IL66 Ptot 250 mW ILD66 Ptot 400 mW ILQ66 Ptot 500 mW 3.3 mW/C IL66 Derate linearly from 25 C ILD66 5.33 mW/C ILQ66 6.67 mW/C 7.0 mm 7.0 mm Creepage distance Clearance distance Comparative tracking index CTI 175 VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Storage temperature Tstg - 55 to + 125 C Operating temperature Tamb - 55 to + 100 C 10 s Isolation resistance Lead soldering time at 260 C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 20 mA Reverse current VR = 6.0 V VR = 0 V MIN. TYP. MAX. UNIT VF 1.25 1.5 V IR 0.1 10 A CO 25 INPUT Capacitance pF OUTPUT Collector emitter breakdown voltage Collector base breakdown voltage (IL66) Collector emitter leakage current Capacitance collector emitter IC = 1.0 mA, IF = 0 A BVCEO 60 IC = 10 A BVCBO 60 VCE = 50 V, IF = 0 A ICEO VCE = 10 V V V 1.0 100 3.4 nA pF COUPLER Saturation voltage, collector emitter IC = 10 mA, IF = 10 mA VCEsat 0.9 1.0 V Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.7, 08-Jun-11 2 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION IF = 2.0 mA, VCE = 10 V Current transfer ratio PART SYMBOL MIN. TYP. IL(D,Q)66-1 CTR 100 400 MAX. UNIT % IL(D,Q)66-2 CTR 300 500 % IF = 0.7 mA, VCE = 10 V IL(D,Q)66-3 CTR 400 500 % IF = 2.0 mA, VCE = 5.0 V IL(D,Q)66-4 CTR 500 750 % SWITCHING CHARACTERSITICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Rise time -1, -2, -4 VCC = 10 V, IF = 2.0 mA, RL = 100 Fall time -1, -2, -4 VCC = 10 V, IF = 2.0 mA, RL = 100 Rise time -3 Fall time -3 MIN. TYP. MAX. UNIT tr 200 s tf 200 s VCC = 10 V, IF = 0.7 mA, RL = 100 tr 200 s VCC = 10 V, IF = 0.7 mA, RL = 100 tf 200 s NON SATURATED TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.2 1.3 NCTRce - Normalized CTRce VF - Forward Voltage (V) 1.4 TA = - 55 C 1.2 TA = 25 C 1.1 1.0 0.9 TA = 100 C 0.8 0.1 0.6 0.4 0.2 VCE = 5 V 1 10 0.0 0.1 100 IF - Forward Current (mA) 10 100 1000 Fig. 3 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current 2.0 10 000 Normalized to: VCE = 5 V IF = 2 mA 1.5 VCE = 5 V VCE = 1 V 1000 ICE - Collector Emitter Current (mA) NCTRce - Normalized CTRce 1 IF - LED Current (mA) iil66_03 Fig. 1 - Forward Voltage vs. Forward Current VCE = 1 V 0.8 0.7 iil66_01 Normalized to: VCE = 5 V IF = 10 mA 1.0 1.0 0.5 VCE = 1 V 100 VCE = 5 V 10 1 0.1 0.01 0.001 0.0 0.1 iil66_02 1 10 100 0.1 I F - LED Current (mA) iil66_04 10 100 Fig. 4 - Non-Saturated and Saturated Collector Emitter Current vs. LED Current Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Rev. 1.7, 08-Jun-11 1 IF - LED Current (mA) 3 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors 50 tpHL - High/Low Propagation Delay (s) Icb - Photocurrent (a) 1000 100 10 1 1 10 VCC = 5 V Vth = 1.5 V 30 220 20 10 0 100 5 10 15 20 IF - LED Current (mA) iil66_08 IF - LED Current (mA) Fig. 5 - Collector Base Photocurrent vs. LED Current Fig. 8 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current 10 000 150 100 tpLH - Low/High Propagation Delay (s) VCE = 5 V 1000 I CE - Collector-emitter Current (mA) 10 k 0 0.1 0.1 iil66_05 40 VCE = 1 V 10 1 0.1 0.01 0.001 0.1 100 2 k 75 VCC = 5 V 50 Vth = 1.5 V 25 220 k 0 0 10 100 0 1000 5 Fig. 6 - Collector Emitter Current vs. LED Current 10 15 20 IF - LED Current (mA) iil66_09 I B - Base Current (s) iil66_06 10 k 125 Fig. 9 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current hFE - Forward Gain 25 000 20 000 IF VCE = 5 V 15 000 10 000 VO 5000 tD tR t PLH VCE = 1 V V th = 1.5 V 0 0.1 iil66_07 1 10 100 1000 t PHL IB - Base Current (A) tF iil66_10 Fig. 7 - Non-Saturated and Saturated hFE vs. LED Current Rev. 1.7, 08-Jun-11 tS Fig. 10 - Switching Waveform 4 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors VCC = 10 V f = 10 kHz, RL DF = 50 % VO IF Fig. 11 - Switching Schematic PACKAGE DIMENSIONS in millimeters 8.8 max. 7.62 0.1 B 8.6 max. 0.3 A 3.3 0.5 min. 4.2 0.1 6.4 max. 0.58 max. 0.3 max. 1.54 2.54 nom. 9 0.6 0.4 B 5.08 nom. A Weight: ca. 0.50 g Creepage distance: > 6 mm Air path: > 6 mm after mounting on PC board 6 5 4 technical drawings according to DIN specifications 14770 1 2 3 Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 0.70 0.19 0.51 0.05 3.045 0.255 3 to 9 2.54 typ. 0.25 0.05 i178006 Rev. 1.7, 08-Jun-11 5 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL66, ILD66, ILQ66 www.vishay.com Vishay Semiconductors Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 10 typ. 4 0.51 0.89 0.46 0.56 2.54 typ. 2.79 3.30 3 to 9 1.27 0.20 0.30 i178007 Option 7 Option 9 7.62 typ. 9.53 10.03 5.84 6.35 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.25 typ. 0.51 1.02 15 max. 8.4 min. 8 min. 10.3 max. 0.76 0.76 R 0.25 2.54 2.54 R 0.25 1.78 8 min. 11.05 18450-7 1.78 1.52 8 min. 11.05 1.52 PACKAGE MARKING (example) ILD66 ILQ66 V YWW H 68 V YWW H 68 Notes * Only options 1 and 7 reflected in the package marking * The VDE logo is only marked on option 1 parts * Tape and reel suffix (T) is not part of the package marking Rev. 1.7, 08-Jun-11 6 Document Number: 83638 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIL300-6 VISHAY Vishay Semiconductors DIL300-6 Package Dimensions in mm 14770 Document Number 83237 Rev. 1.1, 09-Dec-03 www.vishay.com 1 DIL300-6 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83237 Rev. 1.1, 09-Dec-03 DIP-16 VISHAY Vishay Semiconductors DIP-16 Package Dimensions in Inches (mm) pin one ID 8 7 6 5 4 3 2 1 .255 (6.48) .265 (6.81) 9 10 11 12 13 14 15 16 ISO Method A .779 (19.77 ) .790 (20.07) .030 (.76) .045 (1.14) .300 (7.62) typ. .031(.79) .130 (3.30) .150 (3.81) 4 .018 (.46) .022 (.56) .020(.51) .035 (.89) .100 (2.54)typ. .050 (1.27) 10 typ. 3-9 .008 (.20) .012 (.30) .110 (2.79) .130 (3.30) .230 (5.84) .250 (6.35) i178007 Document Number 83239 Rev. 1.1, 09-Dec-03 www.vishay.com 1 DIP-16 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83239 Rev. 1.1, 09-Dec-03 DIP-8 VISHAY Vishay Semiconductors DIP-8 Package Dimensions in Inches (mm) pin one ID 4 3 2 1 5 6 7 8 .255 (6.48) .268 (6.81) ISO Method A .379 (9.63) .390 (9.91) .030 (0.76) .045 (1.14) 4 typ. .031 (0.79) .300 (7.62) typ. .130 (3.30) .150 (3.81) .050 (1.27) .018 (.46) .022 (.56) i178006 Document Number 83241 Rev. 1.1, 09-Dec-03 10 .020 (.51 ) .035 (.89 ) .100 (2.54) typ. 3-9 .008 (.20) .012 (.30) .230(5.84) .110 (2.79) .250(6.35) .130 (3.30) www.vishay.com 1 DIP-8 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83241 Rev. 1.1, 09-Dec-03 Footprints Vishay Semiconductors Footprints 0.004 (0.1) 0.398 (10.2) 5) 0.236 (5.99) 0.293 (7.5) 6 (0.1 R 0.010 (0.13) 0.050 (1.27) 0.00 0.027 (0.7) 0.045 (1.14) 0.260 (6.6) 17977 0.050 (1.27) Fig. 1 - SO8A and DSO8A SMD 0.273 (7.0) 0.004 (0.1) Possible footprint 0.325 (8.2) 0.035 (0.9) 0.036 (0.91) 0.170 (4.32) 0.099 (2.54) 0.014 (0.36) 0.425 (10.8) 0.172 (4.4) 18406 6 (0. 0.00 0.027 (0.7) 15) Fig. 3 - SOP-6, 5 Pin Wide Body Possible footprint 0.035 (0.9) 0.050 (1.27) 0.336 (8.53) R 0.010 (0.25) 0.050 (1.27) 0.014 (0.36) 0.036 (0.91) 0.266 (6.76) 0.195 (5.0) 17972 0.045 (1.14) 0.356 (9.04) 0.296 (7.6) 18403 Fig. 2 - SOP-4, Miniflat Document Number: 83715 Rev. 1.4, 11-Jan-08 Fig. 4 - 8 Pin PCMCIA For technical questions, please contact: optocoupler.answers@vishay.com www.vishay.com 1 Footprints Footprints Vishay Semiconductors 0.336 (8.53) R 0.010 (0.25) 0.270 (6.86) R 0.010 (0.25) 0.014 (0.36) 0.086 (2.18) 0.050 (1.27) 0.014 (0.36) 0.100 (2.54) 0.036 (0.91) 0.200 (5.08) 0.036 (0.91) 0.266 (6.76) 0.045 (1.14) 0.045 (1.14) 0.290 (7.37) 17973 0.356 (9.04) 17976 Fig. 8 - 4 Pin Mini-Flat Fig. 5 - 8 Pin PCMCIA, Heat Sink 0.398 (10.2) 0.004 (0.1) 0.293 (7.5) 0.276 (7.01) 6 (0.1 5) 0.010 (0.25) 0.027 (0.7) R 0.005 (0.13) 0.040 (1.02) 17978 0.099 (2.54) 0.024 (0.61) 0.026 (0.66) 0.050 (1.27) 0.00 0.053 (1.35) 0.216 (5.49) Possible footprint 0.296 (7.52) Fig. 6 - Mini Coupler 0.325 (8.2) 0.035 (0.9) 0.425 (10.8) 18405 0.270 (6.86) Fig. 9 - SOP-6, 4 Pin Wide Body R 0.010 (0.25) 0.406 (10.31) 0.050 (1.27) 0.030 (0.76) 0.014 (0.36) 0.100 (2.54) R 0.010 (0.25) 0.036 (0.91) 0.200 (5.08) 17974 0.290 (7.37) Fig. 7 - SOP-16 www.vishay.com 2 0.070 (1.78) 0.315 (8.00) min. 0.045 (1.14) 1796 2 0.060 (1.52) 0.435 (11.05) Fig. 10 - 4 Pin SMD Option 7 For technical questions, please contact: optocoupler.answers@vishay.com Document Number: 83715 Rev. 1.4, 11-Jan-08 Footprints Footprints Vishay Semiconductors 0.406 (10.31) 0.406 (10.31) 0.030 (0.76) R 0.010 (0.25) 0.100 (2.54) 0.070 (1.78) 0.315 (8.00) min. 17963 0.060 (1.52) 0.435 (11.05) Fig. 11 - 6 Pin SMD Option 7 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.315 (8.00) min. 0.406 (10.31) 17965 0.060 (1.52) 0.435 (11.05) Fig. 13 - 16 Pin SMD Option 7 0.030 (0.76) R 0.010 (0.25) 0.100 (2.54) 0.070 (1.78) 0.315 (8.00) min. 17964 0.472 (11.99) 0.060 (1.52) 0.435 (11.05) 0.030 (0.76) Fig. 12 - 8 Pin SMD Option 7 R 0.010 (0.25) 0.100 (2.54) 0.070 (1.78) 0.392 (9.95) min. 17966 0.060 (1.52) 0.512 (13.00) Fig. 14 - 4 Pin SMD Option 8 Document Number: 83715 Rev. 1.4, 11-Jan-08 For technical questions, please contact: optocoupler.answers@vishay.com www.vishay.com 3 Footprints Footprints Vishay Semiconductors 0.472 (11.99) 0.395 (10.03) 0.030 (0.76) R 0.010 (0.25) 0.100 (2.54) 0.030 (0.76) 0.070 (1.78) 0.392 (9.95) min. 17967 0.060 (1.52) R 0.010 (0.25) 0.100 (2.54) 0.512 (13.00) 0.070 (1.78) 0.315 (8.00) min. Fig. 15 - 6 Pin SMD Option 8 17970 0.060 (1.52) 0.435 (11.05) Fig. 18 - 8 Pin SMD Option 9 0.395 (10.03) 0.395 (10.03) 0.100 (2.54) R 0.010 (0.25) 0.030 (0.76) 0.070 (1.78) 0.315 (8.00) min. 17968 0.060 (1.52) 0.435 (11.05) Fig. 16 - 4 Pin SMD Option 9 0.030 (0.76) 0.395 (10.03) 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.100 (2.54) 0.315 (8.00) min. R 0.010 (0.25) 17971 0.060 (1.52) 0.435 (11.05) 0.070 (1.78) 0.315 (8.00) min. 17969 0.435 (11.05) 0.060 (1.52) Fig. 19 - 16 Pin SMD Option 9 Fig. 17 - 6 Pin SMD Option 9 www.vishay.com 4 For technical questions, please contact: optocoupler.answers@vishay.com Document Number: 83715 Rev. 1.4, 11-Jan-08 Footprints Footprints Vishay Semiconductors 0.336 (8.53) R 0.010 (0.25) 0.050 (1.27) 0.100 (2.54) 0.014 (0.36) 0.036 (0.91) 0.266 (6.76) 17975 0.045(1.14) 0.356 (9.04) Fig. 20 - 16 Pin PCMCIA Document Number: 83715 Rev. 1.4, 11-Jan-08 For technical questions, please contact: optocoupler.answers@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1