Fuse Clips with Mounting Holes 5000 Series For 1/4, 9/32, 13/32", and 9/16 Diameter Fuses Dimensional Data B C C D D * Beryllium copper is by far the most satisfactory metal yet discovered for use in fuse clips. It has the ability to retain spring pressure better than any other metal under high current and high ambient conditions. It also has exceedingly high electrical conductivity. E E Figure 2 Figure 1 1/4 Diameter Fuses Catalog Number End Clip Stop Mat.** 5681-08 No No B (To Finish Spg. Br. Nickel 5681-15-R Spg. Br. Bright Tin 5682-01 BeCu Silver 5682-02 BeCu Silver 5682-11 Yes BeCu Yes 5682-41-R 5682-44-R Albaloy C End Stop) (Contact) 0.41 0.265 0.32 0.132 2 0.108 0.132 0.262 0.41 0.32 0.132 1 Catalog Number End Clip Stop Mat.** Finish 5956-16 No B (To C Dimensions (Inches) D E End Stop) (Contact) (Height) (Width) Hole Fig. Dia. Ref. 0.172 2 Spg. Br. Bright Tin 5960-07 BeCu Silver 0.168 0.196 5960-09 BeCu Silver 0.20 0.172 5960-44 Spg. Br. Nickel 0.20 5960-51 Yes Spg. Br. Bright Dip* 0.168 Yes Spg. Br. Bright Dip* 0.20 0.312 0.71 0.47 0.197 0.196 0.387 0.71 0.47 0.172 1 Spg. Br. Bright Tin 0.106 5960-53 Spg. Br. Bright Tin 0.132 5960-61-R Spg. Br. Bright Tin 0.168 0.196 5960-62-R Spg. Br. Bright Tin 0.168 0.132 5960-63-R Spg. Br. Bright Tin 0.20 0.172 5960-64-R Spr. Br. Bright Tin 0.20 0.128 End Clip Stop Mat.** B (To Finish Spg. Br. Bright Tin 5674-01 BeCu Yes BeCu 5674-10 Yes C 9/16 Diameter Fuses Dimensions (Inches) D E End Stop) (Contact) 5672-11 No 5674-41 13/32 Diameter Fuses Dimensions (Inches) D E Hole Fig. (Height) (Width) Dia. Ref. 9/32 Diameter Fuses Catalog Number * Clips are made of a spring bronze of distinctly superior quality. This metal gives clips great gripping strength and ability to retain fuses under adverse conditions. 0.362 Hole Fig. (Height) (Width) Dia. Ref. Catalog Number 0.52 5591-42 0.38 0.172 2 Bright Tin 0.168 Yes 5591-52 Silver 0.356 Spg. Br. Bright Tin 0.52 0.38 0.172 1 Dimensions (Inches) D E Hole Fig. End Stop) (Contact) (Height) (Width) Dia. Ref. End Clip Stop Mat.** Finish 5592-01 No 5592-11 No B (To C 0.26 0.51 0.89 0.60 0.252 0.56 0.89 0.60 Spg. Br. Bright Dip* Spg. Br. Bright Tin BeCu Silver Spg. Br. Silver 0.172 1 0.20 2 0.20 * Bright Dip is actually treated bare metal with no plating. ** Spg. Br. -- Spring Bronze; BeCu -- Beryllium Copper. Hole in center of both clip and contact area. The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. (c) 2012 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com 1012 BU-SB08760 Page 1 of 1 Data Sheet 2132