Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Sep 21, 2018
1
Product data sheet
Characteristics
AP8887
Rack PDU 2G, Metered, ZeroU, 17.3kW, 240V,
(30) C13 & (12) C19
Overview
Description APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy
optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local
and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization
data to allow Data Center Managers to make informed decisions on load balancing and right sizing
IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring,
a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.
Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet
Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure
Central, Operations, Capacity, and Energy Efficiency.
Model Name Rack PDU 2G, Metered, ZeroU, 17.3kW, 240V, (30) C13 & (12) C19
Includes Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable
Standard Lead Time Usually in Stock
Product Distribution Canada , United States
Output
Nominal Output Voltage 240V
Maximum Total Current Draw per
Phase
24 A
Output Connections (12) IEC 320 C19 (Battery Backup) , (30) IEC 320 C13 (Battery Backup)
Always on Outlets 0
Overload Protection Yes
Input
Nominal Input Voltage 400 3PH
Input Frequency 50/60 Hz
Regulatory Derated Input Current
(North America)
24 A
Input Connections IEC 309 30A 3P+N+E
Cord Length 6 feet (1.83 meters)
Number of Power Cords 1
Maximum Line Current per phase 30 A
Maximum Input Current per phase 30 A
Load Capacity 17300 VA