FEATURES mw 6-18 GHz Frequency Range u Positive Gain Slope Vs Frequency | a Usable Frequency Range 2 - 20 GHz AGC Control With Gate Bias m +15 dBm Output Power Capability m 5.5 dB Noise Figure BOND PAD CONFIGURATION 81 MILS ] _ [ ] Vd <- 106 MILs. | --__-| CHIP THICKNESS: & MILS GUARANTEED PERFORMANCE @ 25C 3 @ PARAMETER MIN | TP_ | MAX | UNiTS | CONDITIONS a 73 w = z TYPICAL PERFORMANCE OPERATING FREQUENCY 6 1B | GHz 3 8 < @ 25C GAIN 5.0 55 a SEE NOTE 1 GAIN FLATNESS 405) +10 | dB QUTPUT POWER +17.0 418.0 dBm 1 dB COMPRESSION 4 GHz 40} 10 +34.0 415.0 dim 1 dB COMPRESSION 18 GHz NOISE FIGURE 55 7.0 | dB Br 8 RETURN LOSS: INPUT | 7.0 8.0 dB SEE NOTE 2 OUTPUT | 10.0 15.0 aB 67 6 VOLTAGES: GATE q 06 5 iY DRAIN | 4.5 5 61V 47 4 REVERSE ISOLATION 50 6B 6 GHz 140 iB 18 GHz ar 2 CONDITION 1S 50% Idss ot 0 2 6 10 14 18 FREQUENCY (GHz) NOTES: 1. 50% Idss WILL BE IN RANGE 40 TO 80 mA, TYPICALLY 60 mA. a Vds 5.0 VOLT. GAIN VARIATION TYPICALLY 0.015 dB/C. Zu zg 2. IMPROVED RETURN LOSSES (10 dB MIN.) CAN BE ACHIEVED Go WITH INPUT MICROSTRIP TRANSFORMER (SEE DETAIL). 5 OTHERWISE CHIPS CAN BE DIRECTLY CASCADED. 3. AT 50% idss, TYPICAL Vgs IS 0.6 VOLTS. GAIN CONTROL IS ACHIEVED 10 WITH THE VARIATION OF Vgs, TYPICALLY 5 dB/VOLTS. 18 4. RECOMMENDED WIREBONDING: TWO 1 MIL WIRES WITH A MAXIMUM 20 LENGTH OF 12 MILS AT RF IN AND 16 MILS AT RF OUT. 2 OUTPUT 5. THERE IS A REQUIREMENT FOR 470 pF DECOUPLING CAPACITORS AT 3 6 10 14 18 Vg AND Vd INPUTS. AN ADDITIONAL 4.7 )F DECOUPLING CAPACITO AT Vd IS RECOMMENDED. : FREQUENCY (GHz) 6. FOLLOW RECOMMENDED MOUNTING INSTRUCTIONS. DAICO INDUSTRIES 255 MM 26045920 0002417 752 This product is manufactured by GEC Marconi Materials, UK, and is distributed by Daico Industries.