PRESSURE GAUGES PG-30 INTERNAL STRUCTURE 1 5 EMC marking 2 Compatible with EMC directive 6 4 Part name 2 O 3 4 O 5 6 Material P-2000 Pressure sensor NBR Sensor "O" ring Adaptor Aluminum Die-casting NBR Case "O" ring PBT (Polybutyleneterephthalate) Case Panel sheet Polyester FEATURES O 1 3 30 mm IP65 O LED LED O O Compact and lightweight general-purpose pressure gauges Innovative general-purpose gauges of compact design (30mm sq.) and drip-proof structure (IP65). OClear indication by LED Easy-to-see LED assures clear readings on the panel and even in a dark place. O Various modes and units can be selected according to applications OEMC Eight different pressure units Three analog output modes Eight switch output modes EN 55011 (EMI) EN 61326-1 (EMS) O OMeet EMC standards O EN 55011 (EMI) EN 61326-1 (EMS) OLow consumption by nondisplay mode OSet data protection by panel lock function MODEL NUMBER DESIGNATION Non-corrosive gases type Series name Pressure range 101- 10 ~ 10 kPa 102- 100 ~ 100 kPa 103- 100 ~ 1000 kPa PG-30-101 R-N NNPN PPNP Switch output interface NPN open collector PNP open collector Pressure reference R Compound pressure (Negative pressure ~ Positive pressure) PG-30 PRESSURE GAUGES LIST OF MODEL NUMBERS Pressure medium Fitting SW Switch output interface Rc 1/8 Non-corrosive gases Gauge Pressure reference -10 ~ 10 kPa -100 ~ 100 kPa -100 ~ 1000 kPa NPN PG-30-101R-N PG-30-102R-N PG-30-103R-N PNP PG-30-101R-P PG-30-102R-P PG-30-103R-P Rated pressure range Verify the above model numbers when placing orders. ACCESSORIES (Sold separately) Name ACPG-001 Rear panel bracket set 2 M 3x4 2 Panel holder cover Panel holder ACPG-004 Holder cover set (For protecting gauge operating panel) M 3x4 Applicable model Panel bracket and M 3 x 4 male screw (2pcs.) Panel holder cover Panel holder 2 Panel stopper (2pcs.) ACPG-003 Panel holder set Contents PG-30 Rear panel bracket and M 3 x 4 male screw (2pcs.) ACPG-002 Panel bracket set Series name PG-30 PG-30 * PG-35 * PG-75 * PG-35H * PG-35L PG-30 * PG-35 * PG-75 * PG-35H * PG-35L STANDARD SPECIFICATIONS O 255 C 12 V DC Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. Item PG-30 102R Model number 101R General specifications Pressure reference Pressure medium Rated pressure range kPa Maximum pressure 103R Gauge Non-corrosive gases -10 ~ 10 -100 ~ 100 -100 ~ 1000 kPa 20 200 1500 Break-down pressure kPa 50 500 2000 Operating temp. range C Compensated temp. range C 0 ~ 50 Operating humidity %RH 35 ~ 85 Protection grade Pressure port Material of pressure port attachment Net weight Thermal error Insulation resistance Dielectric strength Input voltage Consumption current -10 ~ 50 IEC IP65 In accordance with IEC IP65 2-Rc 1/8 Aluminum die-casting, silicone Approx. 80 2 m Including 2 m cable g 3 %F.S. (0 ~ 50 C) 100 M AC500 V 1 100 M minimumDC500 V 1 minute 1 mA Leakage current 1 mA maximum 10.8 ~ 30 V DC Including ripple percentage 50 mA maximum PG-30 PRESSURE GAUGES STANDARD SPECIFICATIONS O 25 5 C 12 V DC Unless otherwise specified, the specs are defined at an ambient temperature of 25 5 C and excitation voltage of 12 V DC. Switch output Analog output Display Item Display element Rated display range Multiplier settings Negative pressure display Display accuracy Output status Output mode Switching capacity Residual voltage State indication Switch hysteresis Repeatability Response Output mode 101R 103R LED 3 Full 3-digit LED - 9.99 ~ 9.99 kPa - 99.9 ~ 99.9 - 100 ~ 999 11 Max. 11 settings LED Red LED is ON. 1% NPN/PNP 2 2-point output (Transistor, Open collector output) / 30 V DC 100 mA Separate mode / window comparator mode Short-circuit protection 1.2 V maximum (NPN), 2.2 V maximum (PNP) At load current of 100 mA 1 LEDOutput 1 (Green LED), 2 LEDOutput 2 (Red LED) 0 ~ 300 counts ON Lighted when output is ON. Adjustable 0.2 %F.S. 1 count ( 0.3 %F.S. maximum) Approx. 5, 25, 250, 2500 ms Adjustable 3 modes 3 Output voltage V zero : Pin=0, V span : Pin=0 Pin (H) 1~5V ( G/V mode ZERO : 1 0.2 V, SPAN : 4 0.2 V R mode ZERO : 3 0.2 V, SPAN : 2 0.2 V ) 103 R (R mode) ZERO : 1.36 0.2 V SPAN : 3.64 0.2 V 10 k Impedance Resolution 1/204 Response Approx. 5, 25, 250, 2500 ms Adjustable Accessories Test item Vibration Shock Pressure cycling Moisture resistance Seal screw, M 5 connecting joint screw M 5 ENVIRONMENTAL CHARACTERISTICS Test conditions 10 ~ 500 Hz, 98.1 m/s2 or 1.5 mm P-P, 3 directions for 2 hours each 490 m/s2, 3 directions for 3 times each 0 0 ~ Rated pressure106 cycles 40 C, 90 ~ 95 %RH, 240 hrs. EMI : EN55011: 2007, A2 : 2007 Group 1, class By EMS : EN61326-1 : 2006 Table 2 EMC PG-30 102R Model number [ Permissible change 2 %F.S. 1 2 %F.S. maximum after test 20 mV Amount of analog output fluctuation is permitted by adding conversion error of 20 mV. 5 %F.S. 1 Pressure indication, switch operating pressure and analog output: 5 %F.S. maximum during test Change in the pressure indication, switch operating points and analog output. INTERNAL ELECTRICAL SCHEMATICS ONPN OPNP 1 2 1 Indicator 2 Indicator Power B Load Pressure Sensor Main circuit Load S.Output1 S.Output2 Power B A.Output S.Output1 Pressure Sensor Main circuit S.Output2 Load A.Output LED LED Pressure indication FG Load Common Common Pressure indication ] FG PG-30 PRESSURE GAUGES SELECTION OF DISPLAY MULTIPLIER 3 LED The last digit/letter represents the selection code : Blinking red LED indicates negative pressure. - Pr Pr Pressure range Selection code Display multiplier 1 x1 2 x 0.0102 3 x 10.2 4 x 7.501 5 x 102 6 x 0.01 7 x 10 8 x 0.145 9 x 0.000145 A x 0.001 b x 0.2953 101R - 9.99 ~ 9.99 102R - 99.9 ~ 99.9 - 99.9 ~ 99.9 - 75.0 ~ 75.0 - 999 ~ 999 - 999 ~ 999 - 750 ~ 750 - 99.9 ~ 99.9 - 1.45 ~ 1.45 - 999 ~ 999 - 14.5 ~ 14.5 - 14 ~ 145 - 2.95 ~ 2.95 - 29.5 ~ 29.5 - 0.10 ~ 1.00 - 29 ~ 295 Diagonal column: Display multiplier cannot be selected due to resolution and number of digits. (Selection code is not indicated either.) Selection code is set at "1" prior to shipment. ANALOG OUTPUT MODE -Pr Pressure range 1 - 1.00 ~ 9.99 103R - 100 ~ 999 - 1.02 ~ 9.99 0 Pr 1V 5V Display 1 R R mode 2 G G mode 3 V V mode 1V 5V Output Mode Operation 5V 1V HI LO A B Separate HI LO HI HI operation Window comparator A B A A operation ON OFF ON ON OFF P1: SW1 P2: SW2 P1 Pr -Pr H S- 1 S- 2 S- 3 S- 4 C- 5 C- 6 C- 7 C- 8 Pressure setting (Operating point) Window comparator mode Separate mode SW2 Window comparator When shipped from our factory-101R : R mode is set at "1", 102R : V mode is set at "3" and 103R : G mode is set at "2". The above 3 types can be set at "1", "2" or "3". However, the accuracy at V mode of 103R can't be guaranteed. SWITCH OUTPUT MODE SW1 Separate 101RR 1 102RV 3 103RG 2 3R/G/V 103RV P2 -Pr Pr H H LO LO operation H B B operation ON ON P1: SW1 P2: SW2 -Pr OFF Pr H OFF P1 H P1P2 or P1P2 1 Setting 1 1 2 (Lower limit) : Setting 1 (Upper limit) : Setting 2 2 Setting 2 1 2 (Lower limit) : Setting 1 (Upper limit) : Setting 2 1 SW1 2 SW2 SW1 SW2 1 2 H SW1 SW2 P2 -Pr OFF Pr H H P1P2-2H H Switch hysteresis P11 Setting 1P22 Setting 2 Note 1. In the Separate Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2. Note 2. In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Setting 2. PG-30 PRESSURE GAUGES OUTLINE DIMENSIONS Unless otherwise specified tolerance : 0.5 (Unit: mm) OPG-30 20 Vent hole 35.5 30 9 20 30 2 - M3 3 Depth 3 6.5 2 Rc 1/8 7 5 ( 4) 5-core shielded cable L = 2000 100 AWG26 UL No.2844 Pressure Port 2 - Rc 1/8 depth 7 Wire color Brown Gray Black White Blue Shield HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately) OPG-30 PG-30 Rear panel mounting bracket (Unit: mm) OPG-30 PG-30 Panel mounting bracket 18 30 Connection Power B Analog output Switch output 1 Switch output 2 Common Fitting 2-3.5 20 6 15 30 20 40 39 2-3.5 4.2 MaterialSUS304 t = 1.5 18 Fixed 15 4.2 20 4.2 20 15 Fixed 20 25 4.2 5.2 Slot 30 MaterialSUS304 t = 1.6 5.2 Slot PG-30 PRESSURE GAUGES HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately) (Unit: mm) OPG-30PG-35PG-35HPG-35LPG-75 3*3*3*+3*/3*3DQHOFXWKROGHUVHW KROGHUFRYHUVHW 5.7 4.5 36 23.5 +0.5 0 36 +0.5 0 42.6 40 13.6 mm Panel cut dimension (Panel board thickness : 1 ~ 3.6 mm) O Panel holder cover set Panel holder cover Panel holder Panel holder set ! ! ! Mounting panel 2 Panel stopper 2 pcs.