MKP1848S DC-Link www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES * Slim line, low building height * Very long useful life time: Up to 100 000 h at UNDC and 70 C * High ripple current capability, low ESR, low ESL * Temperature range: 105 C * Mounting: Radial * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * PV micro inverters * LED street lighting * On board chargers (EV/HEV), battery chargers QUICK REFERENCE DATA Rated capacitance range Capacitance tolerance Rated voltage range, UNDC Climatic testing class Rated temperature Maximum permissible case temperature Maximum applicable peak to peak ripple voltage Reference standards Dielectric Electrodes Construction Encapsulation Terminals Self inductance (LS) Withstanding DC voltage between terminals (1) Insulation resistance Life time expectancy Marking 2 F to 100 F 5% 500 V to 1000 V 40/105/56 85 C 105 C, observing voltage derating 0.2 x UNDC IEC 61071, IEC 60068 Polypropylene film Metallized dielectric capacitor Mono construction Plastic case sealed with resin; flame retardant Tinned wire < 1 nH per mm of lead spacing 1.5 UNDC for 10 s, cut off current 10 mA, rise time 1000 V/s RC between leads, after 1 min > 10 000 s For UNDC 500 V measuring voltage 100 V For UNDC > 500 V measuring voltage 500 V Useful life time: > 100 000 h at UNDC and 70 C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC, 40 C C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer's type designation; manufacturer's logo; year and week of manufacture Notes * For more detailed data and test requirements, contact dc-film@vishay.com * For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document "Voltage Proof Test for Metalized Capacitors" (www.vishay.com/doc?28169) DC VOLTAGE RATINGS UNDC at 85 C UOPDC at 70 C UOPDC at 105 C Revision: 19-Mar-13 500 V 600 V 350 V 700 V 800 V 500 V 1000 V 1200 V 750 V Document Number: 26010 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 10 4 Example: 100 5 1000 6 510 10 000 7 610 10 000 nF 10 F 710 100 000 nF 100 F 1 F 1000 nF P1 (mm) PITCH CODE 27.5 K 37.5 P 52.5 Y PRODUCT HEIGHT CODE MKP 1848 S 6 10 70 J P 4 B TYPE CONSTRUCTION A (2) h = 12 mm B h = 15 mm C h = 18 mm D (2) h = 20 mm (2) h = 22 mm E F h = 24 mm METALLIZED POLYPROPYLENE VOLTAGE TOLERANCE SPECIAL CODE FOR TERMINAL UN = 50 = 500 VDC J 5% 2 2 pins UN = 70 = 700 VDC K 10 % 4 4 pins P2 = 10.2 mm UN = 10 = 1000 VDC 5 4 pins P2 = 20.3 mm 6 6 pins P2 = 20.3 mm (1) Customized Notes (1) Tabs terminals or customized terminals are available on request (2) Product height on request Revision: 19-Mar-13 Document Number: 26010 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein DIMENSIONS in millimeters l w h lt O dt P1 P1 0.5 mm It = 6 mm + 0 mm/- 1 mm P1 w l h lt O dt P1 P2 P1 and P2 0.5 mm It = 6 mm + 0 mm/- 2 mm P2 P1 w l h lt P1 O dt P2 2 x P2 P1 and P2 0.5 mm It = 6 mm + 0 mm/- 2 mm P2 P2 P1 Notes * Standard dimension * O dt 10 % of standard diameter specified Revision: 19-Mar-13 Document Number: 26010 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC HEIGHT CAP. (7) (V) (mm) (F) DIMENSION (5) (mm) w 12 h P1 P2 dV/dt IPEAK (mm) (mm) (V/s) (A) l IRMS (2) (A) ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS 5 24.0 12.0 31.5 27.5 - 30 150 4 - 13 - 60 - MKP1848S55050JK2A 7 27.0 15.0 31.5 27.5 - 30 210 5 - 10 - 60 - MKP1848S57050JK2B 10 27.0 15.0 42.0 37.5 10.2 15 150 5 5 10 7.5 125 110 MKP1848S61050JP*B 15 33.0 15.0 42.0 37.5 10.2 15 225 6.5 7 7 5 125 110 MKP1848S61550JP*B 20 33.0 15.0 57.5 52.5 20.3 7 140 6 6.5 9.5 8 250 220 MKP1848S62050JY*B 30 45.0 15.0 57.5 52.5 20.3 7 210 8.5 9 6.5 5.5 250 220 MKP1848S63050JY*B 50 (6) 62.0 15.0 57.5 52.5 20.3 7 350 - 13.5 - 3.5 - 220 MKP1848S65050JY6B 10 24.0 18.0 42.0 37.5 10.2 15 150 5 5.5 10 7.5 125 110 MKP1848S61050JP*C 15 27.0 18.0 42.0 37.5 10.2 15 225 6.5 7 6.5 5 125 110 MKP1848S61550JP*C 20 39.0 18.0 42.0 37.5 10.2 15 300 8.5 9 5 4 125 110 MKP1848S62050JP*C 30 35.0 18.0 57.5 52.5 20.3 7 210 8 8.5 6.5 5.5 250 220 MKP1848S63050JY*C 50 50.0 18.0 57.5 52.5 20.3 7 350 - 12.5 - 3.5 250 220 MKP1848S65050JY5C 20 30.0 24.0 42.0 37.5 10.2 15 300 8.5 9 5 4 125 110 MKP1848S62050JP*F 30 39.0 24.0 42.0 37.5 10.2 15 450 11 12 3.5 2.5 125 110 MKP1848S63050JP*F 39.0 24.0 57.5 52.5 20.3 7 350 4 3.5 250 220 MKP1848S65050JY*F 70.0 24.0 57.5 52.5 20.3 7 700 - 22 - 2 - 220 MKP1848S71050JY6F 3 24.0 12.0 31.5 27.5 - 35 105 3.5 - 14 - 45 - MKP1848S53070JK2A 5 27.0 15.0 31.5 27.5 - 35 175 5 - 8 - 45 - MKP1848S55070JK2B 7 27.0 15.0 42.0 37.5 10.2 17 119 5 5 15 11.5 110 95 MKP1848S57070JP*B 10 33.0 15.0 42.0 37.5 10.2 17 170 6 6.5 11 8 110 95 MKP1848S61070JP*B 15 33.0 15.0 57.5 52.5 20.3 8 120 6 6.5 12 10 220 200 MKP1848S61570JY*B 20 45.0 15.0 57.5 52.5 20.3 8 160 8 8.5 9 7.5 220 200 MKP1848S62070JY*B 30 (6) 62.0 15.0 57.5 52.5 20.3 8 240 - 12 - 5 - 200 MKP1848S63070JY6B 7 24.0 18.0 42.0 37.5 10.2 17 119 5 5 15 11.5 110 95 MKP1848S57070JP*C 10 27.0 18.0 42.0 37.5 10.2 17 170 6 6.5 11 8 110 95 MKP1848S61070JP*C 15 39.0 18.0 42.0 37.5 10.2 17 255 8.5 9 7 5.5 110 95 MKP1848S61570JP*C 20 35.0 18.0 57.5 52.5 20.3 8 160 7.5 8 9 7.5 220 200 MKP1848S62070JY*C 30 50.0 18.0 57.5 52.5 20.3 8 240 - 11.5 - 5 - 200 MKP1848S63070JY5C 15 30.0 24.0 42.0 37.5 10.2 17 255 8.5 9 7 5.5 110 95 MKP1848S61570JP*F 20 39.0 24.0 42.0 37.5 10.2 17 340 10.5 11.5 6 4 110 95 MKP1848S62070JP*F 30 39.0 24.0 57.5 52.5 20.3 8 240 10.5 11 6 5 220 200 MKP1848S63070JY*F 70.0 24.0 57.5 52.5 20.3 8 400 - 18 - 3 - 200 MKP1848S65070JY6F 15 500 18 24 50 (6) 100 12 11.5 12.5 15 700 18 24 50 Revision: 19-Mar-13 (6) Document Number: 26010 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC HEIGHT CAP. (V) (mm) (F) (7) DIMENSION (5) (mm) w 12 l ESR (3) (m) tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS 2 24.0 12.0 31.5 27.5 - 50 100 3 - 16 - 40 - 5 27.0 15.0 42.0 37.5 10.2 25 125 4.5 4.5 16 11.5 105 90 MKP1848S55010JP*B 7 33.0 15.0 42.0 37.5 10.2 25 175 5.5 6 12 8 105 90 MKP1848S57010JP*B 10 33.0 15.0 57.5 52.5 20.3 12 120 5.5 6 13 10 160 140 MKP1848S61010JY*B 15 45.0 15.0 57.5 52.5 20.3 12 180 7.5 8 9 6.5 160 140 MKP1848S61510JY*B 20 (6) 62.0 15.0 57.5 52.5 20.3 12 240 - 11 - 5 - 140 MKP1848S62010JY6B 3 24.0 18.0 42.0 37.5 10.2 25 75 3.5 3.5 27 19 105 90 MKP1848S53010JP*C 5 27.0 18.0 42.0 37.5 10.2 25 125 4.5 5 16 11.5 105 90 MKP1848S55010JP*C 15 1000 h P1 P2 dV/dt IPEAK (mm) (mm) (V/s) (A) IRMS (2) (A) MKP1848S52010JK2A 7 39.0 18.0 42.0 37.5 10.2 25 175 6.5 7 12 8 105 90 MKP1848S57010JP*C 10 39.0 18.0 42.0 37.5 10.2 25 250 7.5 8 8 6 105 90 MKP1848S61010JP*C 15 50.0 18.0 57.5 52.5 20.3 12 180 - 9 - 6.5 - 140 MKP1848S61510JY5C 20 50.0 18.0 57.5 52.5 20.3 12 240 - 10 - 5 - 140 MKP1848S62010JY5C 7 30.0 24.0 42.0 37.5 10.2 25 175 6.5 6.5 12 8 105 90 MKP1848S57010JP*F 10 39.0 24.0 42.0 37.5 10.2 25 250 8.5 9 8 6 105 90 MKP1848S61010JP*F 15 39.0 24.0 57.5 52.5 20.3 12 180 8 8.5 9 6.5 160 140 MKP1848S61510JY*F 20 39.0 24.0 57.5 52.5 20.3 12 240 9.5 10 7 5 160 140 MKP1848S62010JY*F 30 (6) 70.0 24.0 57.5 52.5 20.3 12 360 - 15.5 - 4 - 140 MKP1848S63010JY6F 18 24 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, + 85 C, t = + 15 C, capacitance tolerlance 5 % (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan values (5) Standard dimension (6) 6 pins (7) Intermediate capacitance values available on request PACKAGING INFORMATION UNDC (V) HEIGHT (mm) 12 15 500 18 24 Revision: 19-Mar-13 CAP. (1) (F) O dt ORDERING CODE (1) MASS (g) SPQ (3) (pcs) 5 0.8 MKP1848S55050JK2A 7 99 7 0.8 MKP1848S57050JK2B 10.5 90 10 1.0 MKP1848S61050JP*B 14 70 15 1.0 MKP1848S61550JP*B 18.5 56 20 1.2 MKP1848S62050JY*B 22.5 40 30 1.2 MKP1848S63050JY*B 31.5 30 50 (2) 1.2 MKP1848S65050JY6B 43 20 10 1.0 MKP1848S61050JP*C 15 77 15 1.0 MKP1848S61550JP*C 15.5 70 20 1.0 MKP1848S62050JP*C 25 49 30 1.2 MKP1848S63050JY*C 30.5 40 50 1.2 MKP1848S65050JY5C 41.5 25 20 1.0 MKP1848S62050JP*F 25 63 30 1.0 MKP1848S63050JP*F 32 49 50 1.2 MKP1848S65050JY*F 41.5 40 100 (2) 1.2 MKP1848S71050JY6F 78 20 Document Number: 26010 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC (V) HEIGHT (mm) 12 CAP. (1) (F) O dt ORDERING CODE (1) MASS (g) SPQ (3) (pcs) 3 0.8 MKP1848S53070JK2A 6.5 99 5 0.8 MKP1848S55070JK2B 9 90 7 1.0 MKP1848S57070JP*B 12.5 70 10 1.0 MKP1848S61070JP*B 16 56 15 1.2 MKP1848S61570JY*B 21.5 40 20 1.2 MKP1848S62070JY*B 32.5 30 1.2 MKP1848S63070JY6B 43 20 7 1.0 MKP1848S57070JP*C 13 77 10 1.0 MKP1848S61070JP*C 15.5 70 15 1.0 MKP1848S61570JP*C 22 49 20 1.2 MKP1848S62070JY*C 29.5 40 30 1.2 MKP1848S62570JY5C 41.5 25 15 1.0 MKP1848S61570JP*F 21 63 20 1.0 MKP1848S62070JP*F 28.5 49 30 1.2 MKP1848S63070JY*F 39.5 40 1.2 MKP1848S65070JY6F 83 20 15 30 (2) 700 18 24 50 12 15 2 0.8 MKP1848S52010JK2A 11 99 5 1.0 MKP1848S55010JP*B 13 70 7 1.0 MKP1848S57010JP*B 16.5 56 10 1.2 MKP1848S61010JY*B 21.5 40 15 1.2 MKP1848S61510JY*B 30 30 1.2 MKP1848S62010JY6B 45 20 3 1.0 MKP1848S53010JP*C 16.5 77 5 1.0 MKP1848S55010JP*C 16 70 20 1000 (2) (2) 7 1.0 MKP1848S57010JP*C 25.5 49 10 1.0 MKP1848S61010JP*C 21.5 49 15 1.2 MKP1848S61510JY5C 43.5 25 20 1.2 MKP1848S62010JY5C 43.5 25 7 1.0 MKP1848S57010JP*F 25 63 10 1.0 MKP1848S61010JP*F 33 49 15 1.2 MKP1848S61510JY*F 45.5 40 20 1.2 MKP1848S62010JY*F 39 40 1.2 MKP1848S63010JY6F 87 20 18 24 30 (2) Notes (1) Intermediate capacitance values available on request (2) 6 pins (3) SPQ = Standard Packing Quantity Revision: 19-Mar-13 Document Number: 26010 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD FOR 2 PINS PRODUCTS The maximum space for length (lmax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. For products with pitch = 37.5 mm, = 0.7 mm for l and w, and = 0 mm for h For products with pitch = 52.5 mm, = 1.0 mm for l and w, and = 0 mm for h Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = w + Eccentricity Imax. = I + hmax. = h + Seating plane SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD FOR MULTIPLE PINS PRODUCTS The product height with seating plane as given by "IEC 60717" as reference: hmax. = h . The maximum length and width of film capacitors is shown in the figure. DIMENSIONS in millimeters wmax. P2 2 x P2 0.5 mm Lmax. P1 OD P1 37.5 52.5 Lmax. I + 1.5 I + 1.8 Wmax. w + 1.8 w + 2.0 OD 1.5 1.7 H h + 0.5 h + 0.5 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document "Soldering Conditions Vishay Film Capacitors": www.vishay.com/doc?28171 STORAGE TEMPERATURE Storage temperature: Tstg = - 25 C to + 35 C with RH maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 C 1 C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % 2 %. For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 19-Mar-13 Document Number: 26010 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein 4 RC (s) C/C (%) CHARACTERISTICS 3 105 2 1 0 -1 104 -2 -3 -4 -5 103 -6 - 60 - 40 - 20 0 20 40 60 80 100 120 0 20 40 60 80 100 Tamb (C) Tamb (C) Insulation resistance as a function of ambient temperature (typical) 1.3 IRMS Operational/IRMS max. UOPDC/UNDC (V) Capacitance as a function of ambient temperature (typical) 1.2 1.1 70 C 1.0 85 C 0.9 0.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.7 105 C 0.2 0.6 0 0.5 103 104 105 106 50 60 10 Z () Z () 80 90 100 110 Maximum IRMS current in function of ambient temperature Lifetime expectancy (typical) Pitch 27. 5 mm Pitch 37. 5 mm 10 Pitch 52. 5 mm 1 1 0.1 0.1 5 F 10 F 20 F 30 F 0.01 70 Maximum Ambient Temperature (C) Lifetime Expectancy (h) 0.01 0.001 20 F 50 F 100 F 0.001 104 105 106 107 104 105 106 f (Hz) Impedance vs. Frequency (typical) Revision: 19-Mar-13 107 f (Hz) Impedance vs. Frequency (typical) Document Number: 26010 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein HEAT CONDUCTIVITY DIMENSION (mm) w h l HEAT CONDUCTIVITY (mW/C) 24 12 31.5 21.5 27 15 31.5 26 27 15 42 33 33 15 42 38 24 18 42 33.5 27 18 42 36 39 18 42 47 30 24 42 45.5 39 24 42 54.5 33 15 57.5 48.5 45 15 57.5 61.5 62 15 57.5 80 35 18 57.5 55 50 18 57.5 72 39 24 57.5 68 70 24 57.5 106 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: * T = Tcase - Tambient = Case temperature rise (C) with a maximum of 15 C at rated temperature. * P = IRMS2 x ESR = Power dissipation of the component (mW) * G = Heat conductivity of the component (mW/C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded condition (Tamb) and loaded condition (TC). To avoid external thermal radiation or convection, the capacitor must be tested in a closed area, free from air circulation. Revision: 19-Mar-13 Document Number: 26010 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein APPLICATION NOTES AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The continuous peak voltage (Up+) shall not exceed the DC voltage rating (UNDC) 2. The peak-to-peak ripple voltage (Upp) shall not be greater than 0.2 x UNDC Voltage (V) Non reversing recurrent waveform Up+ UNDC Up- t 3. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact dc-film@vishay.com. 4. The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x ------- x dt < U NDC x ------- dt dt rated 0 T is the pulse duration MAXIMUM REPETITIVE PEAK VOLTAGES REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x UNDC 30 % of on load duration 1.15 x UNDC 30 min 1.2 x UNDC 5 min 1.3 x UNDC 1 min 1.5 x UNDC 110 ms Note * The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy Revision: 19-Mar-13 Document Number: 26010 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2-1 External inspection, visual examination Legible marking as specified 5.14.2-2 Dimensions See specification drawing 5.3-1 Capacitance 5.3-2 tan 5.5.1-2 Voltage test between terminals 5.7 Insulation resistance 1 kHz at room temperature See specific reference data 1 kHz at room temperature 10 kHz at room temperature See specific reference data 1.5 x UNDC at Tamb Duration: 10 s No visible damage or puncture No flashover UNDC 500 V measuring voltage 100 V at room temperature UNDC > 500 V measuring voltage 500 V at room temperature Duration: 1 min See specific reference data Check for finish, marking and overall dimensions Legible marking and finish as specified Dimensions: See specification drawing TYPE TESTS 5.14.2 External inspection 5.14.0 Initial measurements 5.14.1-1/4 Robustness of terminations IEC 60068-2-21 5.14.1-6 Resistance to soldering heat IEC 60068-2-20 5.14.4 Final measurements 5.14.0 Initial measurements 5.14.3-1 Vibration IEC 60068-2-6 Revision: 19-Mar-13 Capacitance at 1 kHz tan at 10 kHz Tensile Ua1 Wire diameter Section modulus 0.8 mm 0.5 mm2 1.25 mm 1.2 mm2 Duration: 10 s 1 s Bending, Ub method 1 Wire diameter Section modulus 0.8 mm 0.5 mm2 1.25 mm 1.2 mm2 4 x 90, duration: 2 s to 3 s/bend Load 10 N 20 N Load 10 N 20 N No pre-drying, method 1A Solder bath: 260 C 5 C Duration: 10 s 1 s Capacitance tan |C/C| 0.5 % Increase of tan 0.0050 compared to the values measured in 5.14.0 Capacitance at 1 kHz tan at 10 kHz 10 Hz to 55 Hz; amplitude 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles 3 axes offset from each other by 90 1 octave/min Visual examination No visible damage Document Number: 26010 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST 5.14.3-2 Shock or impact IEC 60068-2-6 5.14.4 Final measurements 5.5.3-1 Initial measurements 5.5.3-2 Voltage test between terminals 5.5.3-3 Final measurements 5.9-1 Initial measurements 5.9-2 Surge discharge test 5.9-2 Voltage test between terminals 5.9-3 Final measurements 5.11-1 Initial measurements 5.11-2 Self healing test 5.11-3 Final measurements Revision: 19-Mar-13 CONDITIONS Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination Capacitance tan PERFORMANCE REQUIREMENTS No visible damage |C/C| 0.5 % Increase of tan 0.0050 compared to the values measured in 5.14.0 Capacitance at 1 kHz tan at 10 kHz R insulation 1.5 x UNDC at Tamb Duration: 60 s Capacitance tan R insulation |C/C| 0.5 % Increase of tan 0.0050 R insulation 50 % of specified values Capacitance at 1 kHz tan at 10 kHz 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) Within 5 min after the surge discharge test Duration: 60 s 1.5 x UNDC at Tamb Capacitance tan at 10 kHz |C/C| 1.0 % tan 1.2 x initial tan + 0.0001 compared to the values measured in 5.9-1 Capacitance at 1 kHz tan at 10 kHz 1.5 x UNDC Duration: 10 s Number of clearings 5 Clearing = Voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x UNDC for a duration of 10 s Capacitance tan |C/C| 0.5 % tan 1.2 x initial tan + 0.0001 compared to the values measured in 5.11-1 Document Number: 26010 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.13-0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.13-1 Change of temperature according to IEC 60682-2-14 Test Nb Tmax. = 85 C Tmin. = - 40 C Transition time: 1 h, equivalent to 1 C/min 5 cycles 5.13-2 Damp heat steady state according to IEC 60682-2-78 Test Ca Tmax. = 40 C + 2 C RH = 93 % 3 % Duration: 56 days 5.5.3-2 Voltage test between terminals 1.5 x UNDC at ambient temperature Duration: 60 s 5.13-3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan at 1 VRMS 10 kHz |C/C| 2.0 % Increase of tan 0.0150 compared to the values measured in 5.13-0 5.10.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.10-1 Thermal stability test under overload conditions Natural cooling Tamb 5 C 1.21 x Pmax. = (U2/2) x W2 x C x tan = 1.21 x (I2max./W2 x C) x tan with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration: 48 h 5.10-2 Final measurements Measure the temperature every 1.5 h during the last 6 h Temperature rise 1 C |C/C| 2.0 % Increase of tan 1.2 x initial + 0.0150 Impedance analyser at Tamb < 0.9 times the value as specified in typical curve "Resonant frequency" of this specification 5.12 Resonance frequency measurement Revision: 19-Mar-13 Document Number: 26010 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848S DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST 5.15-0 Initial measurements 5.15-1 Endurance test between terminals CONDITIONS PERFORMANCE REQUIREMENTS Capacitance at 1 kHz tan at 10 kHz Sequence: 1.3 x UNDC at 85 C 1.3 x UOPDC at 105 C Duration: 500 h 1000 x discharge at 1.4 x Ipeak (maximum respective peak current in continuous operation) 1.3 x UNDC at 85 C 1.3 x UOPDC at 105 C Duration: 500 h 5.15-2 Final measurement Capacitance tan |C/C| 3.0 % Increase of tan 0.0150 compared to the values measured in 5.15-0 5.16.3-0 Initial measurements Capacitance at 1 kHz 5.16.3-1 Desctruction test sequence High DC voltage test Tmax. = 85 C Product enveloped with cheese cloth 3 x UNDC for DC voltage until repetitive product healings occur Duration = 15 min High AC voltage test AC RMS voltage = UNDC/2 2 with minimum of 250 VAC Duration = 5 min Repeat destruction sequence 3 x Audible healings or check healings with oscilloscope 5.16.3-2 Final measurements Visual examination No puncturing, flashover or burning of the cheese cloth Self healing punctures are permitted Note * Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, IEC-publication 61071" Revision: 19-Mar-13 Document Number: 26010 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000