General Purpose Relay MY Designed small, 2- and 3-pole types break 5 A loads and 4-pole type, 3 A load High reliability, long life Ultra-high sensitivity with quick response High vibration/shock resistance 3- and 4-pole types have an arc barrier UL and CSA approved Withstands dielectric strength of 2,000 V Relays with high-capacity, LED indicator, diode surge suppression, push-to-test button, or RC circuit are available Changes due to aging are negligible because of use of special magnetic materials, thus ensuring long continuous holding time Little change in characteristics such as contact follow, contact pressure, etc., throughout long life Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., MY4-DC6). Type Standard Terminal Plug-in/solder PCB Plug-in/solder PCB Plug-in/solder PCB Contact form DPDT 3PDT 4PDT DPDT 3PDT 4PDT 4PDT 4PDT 4PDT 4PDT Construction Unsealed Sealed Hermetically Sealed Part number Single contact Standard Upper bracket mounting mounting bracket MY2 MY2F MY3 MY3F MY4 MY4F MY2-02 -- MY3-02 -- MY4-02 -- MYQ4 -- MYQ4-02 -- MY4H -- MY4H-0 -- Lower mounting bracket MY2S MY3S MY4S -- -- -- -- -- -- -- Bifurcated contact Standard Upper bracket mounting mounting bracket MY2Z MY2ZF -- -- MY4Z MY4ZF MY2Z-02 -- -- -- MY2Z-02 -- MYQ4Z -- MYQ4Z-02 -- MY4ZH -- MY4ZH-0 -- Note: 1. For SEV approved type, order the following: MY4-SV-DC6. (Lloyd's Register approval. See "Approvals" section.) 2. To order connecting sockets and mounting tracks, see "Accessories" section. 3. AgCdO contacts are also available (MY2E, MY3E, MY4E). Contact your OMRON sales representative for details. Lower mounting bracket MY2ZS -- MY4ZS -- -- -- -- -- -- -- MY MY Ordering information (continued) Type LED indicator Terminal Plug-in/solder High-capacity Diode surge suppression* LED indicator and diode surge suppression* 4PDT DPDT 3PDT 4PDT DPDT 4PDT DPDT 4PDT DPDT 4PDT RC circuit** Push-to-test button LED indicator and RC circuit Type Latching Note: 1. 2. 3. 4. Contact form Construction DPDT 3PDT 4PDT DPDT w/o LED indicator LED indicator DPDT 3PDT 4PDT DPDT 3PDT Terminal Plug-in PC board w/o LED indicator LED indicator Contact form DPDT Part number Single contact Standard Upper bracket mounting mounting bracket MY2N -- MY3N -- MY4N -- MY2-Y -- Lower mounting bracket -- -- -- -- Bifurcated contact Standard Upper bracket mounting mounting bracket MY2ZN -- -- -- MY4ZN -- -- -- Lower mounting bracket -- -- -- -- MY2N-Y MY2-D MY3-D MY4-D MY2N-D2 MY3N-D2 -- -- -- -- -- -- -- -- -- -- -- -- -- MY2Z-D -- MY4Z-D MY2ZN-D2 -- -- -- -- -- -- -- -- -- -- -- -- -- MY4N-D2 MY2-CR MY3-CR MY4-CR MY2N-CR MY4N-CR MY214 MY414 MY214N MY414N -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- MY4ZN-D2 MY2Z-CR -- MY4Z-CR -- -- MY2Z12 MY4Z12 MY2Z12N MY4Z12N -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Part number MY2K-US MY2K-02-US For SEV approved type, order as the following: MY4-SV-DC6. (Lloyd's Register approval. See "Approvals" section.) To order connecting sockets and mounting tracks, see "Accessories" section. AgCdO contacts are also available. Contact your OMRON sales representative for details. * DC coils only ** AC coils only ACCESSORIES Connecting Sockets To Order: Select the appropriate part numbers for sockets, clips, and mounting tracks (if required) from the available types chart. Available Types Track mounted sockets Relay DPDT 3PDT 4PDT Socket* PYF08A-E PYF11A PYF14A-E Relay hold-down clip Standard PYC-A1 * Track mounted socket can be used as a front connecting socket. 2 RC circuit Y92-H3 Mounting track PFP-100N/PFP-50N & PFP-M or PFP-100N2 PFP-S (Optional spacer) MY MY Back connecting sockets Relay DPDT 3PDT 4PDT Solder terminal socket PY08 PY11 PY14 Wire wrap terminal socket PY08QN PY11QN PY14QN Relay hold-down clip Standard Push-to-test RC circuit PYC-P PYC-P2 PYC-1 Mtg. plate PYC-S Socket Mounting Plate 1 18 PYP-1 PYP-18 36 PYP-36 Note: Types PYP-18, PTP-12 and PTP-10 may be cut to any desired length. Relay DPDT 3PDT 4PDT Relay hold-down clip Standard PYC-P PC terminal socket PY08-02 PY11-02 PY14-02 Push-to-test PYC-P2 RC circuit PYC-1 Specifications CONTACT DATA Non-latching - Unsealed DPDT, 3PDT Resistive load (p.f. = 1) Load Rated load Contact material Carry current Max. operating voltage Max. operating current Max. switching capacity Min. permissible load (see note) 5 A at 220 VAC 5 A at 24 VDC Ag 5A 250 VAC 125 VDC 5A Inductive load (p.f. = 0.4) (L/R = 7 ms) 2 A at 220 VAC 2 A at 24 VDC 3A 4DPT Resistive load (p.f. = 1) 3 A at 220 VAC 3 A at 24 VDC Ag (Au Flash) 1A 1A 1,100 VA 440 VA 120 W 48 W Standard type: 1 mA, 5 VDC Inductive load (p.f. = 0.4) (L/R = 7 ms) 0.8 A at 220 VAC 1.5 A at 24 VDC High-capacity Resistive load (p.f. = 1) 3A 7 A 220 VAC 7 A 24 VDC AgCdO 7A 3A 7A 660 VA 176 VA 72 W 36 W Standard and high sensitivity types: 1 mA, 1 VDC 1,540 VA 168 W 100 A, 1 VDC Inductive load (p.f. = 0.4) (L/R = 7 ms) 3.5 A 220 VAC 3.5 A 24 VDC 770 VA 84 W Bifurcated type: 100 A, 1 VDC Non-latching - Sealed/Hermetically sealed Sealed, 4PDT Resistive load (p.f. = 1) Load Rated load Contact material Carry current Max. operating voltage Max. operating current Max. switching capacity Min. permissible load (see note) 1 A at 220 VAC 1 A at 24 VDC Ag (Au Flash) 1A 250 VAC 125 VDC 1A Inductive load (p.f. = 0.4) (L/R = 7 ms) 0.5 A at 220 VAC 0.5 A at 24 VDC 220 VA 110 VA 24 W 12 W Standard and high sensitivity types: 1 mA, 1 VDC Bifurcated type: 100 A, 1 VDC Hermetically sealed, 4DPT Resistive load (p.f. = 1) 3 A at 110 VAC 3 A at 24 VDC Inductive load (p.f. = 0.4) (L/R = 7 ms) 0.8 A at 110 VAC 1.5 A at 24 VDC 3A 125 VAC 125 VDC 3A 330 VA 72 W 88 VA 36 W Note: P level: 60 = 0.1 x 10-6/operation 3 MY MY COIL DATA Non-latching - AC Rated voltage (V) 6 12 24 50 100/110 110/120 200/220 220/240 Rated current (mA) 50 Hz 214.10 106.50 53.80 25.70 11.70/12.90 9.90/10.80 6.20/6.80 4.80/5.30 60 Hz 183 91 46 22 10/11 8.40/9.20 5.30/5.80 4.20/4.60 Coil resistance () 12.20 46 180 788 3,750 4,430 12,950 18,790 Coil inductance (ref. value) (H) Armature Armature OFF ON 0.04 0.08 0.17 0.33 0.69 1.30 3.22 5.66 14.54 24.60 19.20 32.10 54.75 94.07 83.50 136.40 Pick-up Dropout voltage voltage (% of rated voltage) 80% max. 30% min. Maximum voltage Power consumption (VA, W) 110% max. Approx. 1.00 to 1.20 Approx. 0.90 to 1.10 Non-latching - DC Rated voltage (V) Rated current (mA) Coil resistance () 6 12 24 48 100/110 150 75 36.90 18.50 9.10/10 40 160 650 2,600 11,000 Coil inductance (ref. value) (H) Armature Armature OFF ON 0.17 0.33 0.73 1.37 3.20 5.72 10.60 21.00 45.60 86.20 Pick-up voltage Dropout voltage Maximum voltage (% of rated voltage) 80% max. 10% min. Power consumption (VA, W) 110% max. Approx. 0.90 Dropout voltage Power consumption (VA, W) Latching - AC Rated voltage (V) 6 12 24 50 120 Rated current (mA) Set coil Reset coil Coil resistance () 50 Hz 146 57 27.40 14 15.80 Set coil 13 72 320 1,400 8,300 60 Hz 142 56 26.40 13.40 5.60 50/60 Hz 68 39 18.60 3.50 3.50 Reset coil 32 130 550 3,000 3,000 Pick-up voltage Maximum voltage (% of rated voltage) 80% max. 80% max. Set coil 110% max. Approx. 0.60 to 0.90 Pick-up Dropout voltage voltage (% of rated voltage) 80% max. 80% max. Maximum voltage Reset coil Approx. 0.20 to 0.50 Latching - DC Rated voltage (V) 6 12 24 Rated current (mA) Set coil Reset coil 50/60 Hz 50/60 Hz 230 100 110 50 52 25 Coil resistance () Set coil Reset coil 26 60 110 235 470 940 Power consumption (VA, W) Set coil Reset coil 110% max. Approx. Approx. 1.30 0.06 Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C (73F) with tolerances of +15%, -20% for AC rated current, and 15% for DC rated coil resistance. 2. The AC coil resistance and inductance are reference values at 60 Hz. 3. The performance characteristics are measured at a coil temperature of 23C (73F). 4. Because the coil is designed for low power consumption, connect a bleeder (if necessary after confirming the leakage current), when the coil is driven by an SCR. 5. For AC type latching coils, the rated current values are half-wave rectified current values measured with a DC ammeter. 4 MY MY CHARACTERISTICS Non-latching Contact resistance Operate time Release time Operating frequency Insulation resistance Dielectric strength Mechanically Under rated load Single contact type Bifurcated contact type Vibration Ambient temperature Mechanical durability Malfunction durability Mechanical durability Malfunction durability Operating Humidity Service Life Mechanically Shock Mechanically Electrically Weight 50 m max. 20 ms max. 20 ms max. 18,000 operations/hour 1,800 operations/hour 100 M min. (at 500 VDC) Unsealed: 2,000 VAC, 50/60 Hz for 1 minute 1,000 VAC, 50/60 Hz for 1 minute between contacts of same polarity Sealed: 1,500 VAC, 50/60 Hz for 1 minute 1,000 VAC, 50/60 Hz for 1 minute between contacts of same polarity Hermetically sealed: 1,000 VAC, 50/60 Hz for 1 minute 700 VAC, 50/60 Hz for 1 minute between contacts of same polarity 1,500 VAC, 50/60 Hz for 1 minute 1,000 VAC, 50/60 Hz for 1 minute between non-continuous contacts 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude 1,000 m/s2 (approx. 100 G) 200 m/s2 (approx. 20 G) Unsealed: -55 to 70C (-67 to 158F) Sealed: -55 to 60C (-67 to 140F) Hermetically sealed: 25 to 60C (77 to 140F) 35% to 85% RH Single contact type: AC: 50 million operations min. (at operating frequency of 18,000 operations/hour) DC: 100 million operations min. (at operating frequency of 18,000 operations/hour) Bifurcated contact type: AC: 50 million operations min. DC: 20 million operations min. (5 million operations for the sealed/hermetically sealed types) (at operating frequency of 1,800 operations/hour) See "Characteristic Data" Sealed/unsealed: Approx. 35 g (1.23 oz) Hermetically sealed: Approx. 50 g (1.76 oz) Latching Contact resistance Operate time Release time Operating frequency Mechanically Under rated load Insulation resistance Dielectric strength Vibration Shock Ambient temperature Humidity Service Life Mechanical durability Malfunction durability Mechanical durability Malfunction durability Operating Mechanically Electrically Weight 50 m max. AC: 30 ms max.; DC: 15 ms max. AC: 30 ms max.; DC: 15 ms max. 18,000 operations/hour 1,800 operations/hour 100 M min. (at 500 VDC) 1,500 VAC, 50/60 Hz for 1 minute 1,000 VAC, 50/60 Hz for 1 minute between contacts of same polarity, and between set and reset coils 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude 1,000 m/s2 (approx. 100 G) 200 m/s2 (approx. 20 G) -55 to 70C (-67 to 158F) 45% to 85% RH 100 million operations min. (at operating frequency of 18,000 operations/hour) See "Characteristic Data" Approx. 30 g (1.06 oz) Note: Data shown are of initial value. 5 MY MY CHARACTERISTIC DATA Rated operating current (A) Rated operating voltage (V) MY4(Z)H MYQ4(Z)H Rated operating current (A) MY4 Rated operating current (A) MY2, MY3 Rated operating current (A) Maximum switching capacity - Non-latching Rated operating voltage (V) Rated operating voltage (V) Rated operating voltage (V) MY2, MY3 (Resistive load) MY2, MY3 (Inductive load) MY4 (Resistive load) MY4 (Inductive load) Service life (operations x 106) Service life (operations x 106) Service life (operations x 106) Service life (operations x 106) Electrical service life Rated operating current (A) MY4Z (Resistive load) MY4Z (Inductive load) MYQ4 Service life (operations x 106) Service life (operations x 106) Rated operating current (A) 6 MY2-Y (Inductive load) Service life (operations x 106) Service life (operations x 106) Rated operating current (A) MY2-Y(Resistive load) Rated operating current (A) Rated operating current (A) Rated operating current (A) Service life (operations x 106) Service life (operations x 106) MY4H Rated operating current (A) Rated operating current (A) Rated operating current (A) Rated operating current (A) Electrical service life MY2K(-02)-US MY2K(-02)-US (Resistive load) (Inductive load) Rated operating current (A) Maximum switching capacity - Latching Service life (operations x 106) MY Service life (operations x 106) MY Rated operating voltage (V) Rated operating current (A) Rated operating current (A) Dimensions Unit: mm (inch) RELAYS MY2 MY3 MY -02 Mounting holes MY F Mounting holes Note: MY4 The above dimensioned drawing shows the 4-pole type. The dimensions of the 2- and 3-pole types are identical to the 4-pole type. 7 MY MY Unit: mm (inch) RELAYS (continued) MY(Z)H MY -5 MY4(Z)H-0 Mounting holes Terminal arrangement (Bottom view) MY2 Note: The above dimensioned drawing shows the 4-pole type. The dimensions of the 2- and 3-pole types are identical the 4-pole type. 8 MYQ4(Z) MYQ4(Z)-02 MY2K-US MY2K-02-US MY3 MY4, MYQ4(Z), MY4(Z)H, MY4H-0 Mounting holes (Bottom view) MY MY Unit: mm (inch) ACCESSORIES Track mounted sockets (UL File No. E87929) (CSA Report No. LR46088) PYF08A-E Terminal arrangement/ mounting holes (Top view) PYF11A PYF14A-E Terminal arrangement/ mounting holes (Top view) Mounting height of relay with socket Terminal arrangement/ mounting holes (Top view) Back connecting socket (UL File No. E87929) (CSA Report No. LR46088) - DPDT PY08 PY08QN PY08-02 Back connecting socket (UL File No. E87929) (CSA Report No. LR46088) - 3PDT PY11 PY11QN PY11-02 Note: 1. UL/CSA does not apply to wire wrap (Q) type sockets. 2. Value in brackets is for MY CR. 9 MY MY Unit: mm (inch) ACCESSORIES (continued) Back connecting socket (UL File No. E87929) (CSA Report No. LR46088) - 4PDT PY14 PY14QN Terminal arrangement (Bottom view) DPDT 3DPT PY14-02 Panel cutout Mounting height of relay with socket 4DPT Note: Value in brackets is for MY -CR. Mounting holes DPDT 3PDT 4PDT PYC-P for PY socket PYC-S for relay mounting plates * For types wiith suffix - 02. Relay hold-down clip PYC-A1 for PYF A socket 10 MY MY Relay hold-down clip PYC-P2 for test button self-contained type with PY A socket Y92-HC for RC circuit PYC-1 for RC circuit PFP-100N/PFP-50N mounting track PFP-100N2 mounting track * This dimension is 14.99 mm (0.59 in) on both ends in the case of PFP-100N, but on one end in the case of PFP-50N. ** L = Length PFP-50N ............... L = 497.84 mm (19.60 in) PFP-100N ............... L = 990.60 mm (39.00 in) PFP-100N2 ............... L = 990.60 mm (39.00 in) *** A total of twelve 24.89 x 4.57 mm (0.98 x 0.18 in) elliptic holes are provided, with six holes cut from each end of the track at a pitch of 9.91 (0.39) between holes. PFP-M end plate PFP-S spacer 11 MY MY Unit: mm (inch) ACCESSORIES (continued) Socket mounting plates [t=1.52 (.06)] PYP-1 Socket needed PY08, PY11, PY11QN, PY14, PY4QN PYP-18 PYP-36 Number of socket specs. 1 18 36 PYP-1 PYP-18 PYP-36 RELAY OPTIONS LED Indicator Terminal arrangement/Internal connections (Bottom view) Specifications and dimensions same as the standard type with the following exception. Because an LED indicator is employed as the operation indicator, the rated current is approximately 3.8 mA higher in the DC types and 0.5 to 5 mA higher in the AC types than in the standard type. MY4N DC coil rating type AC coil rating type Ambient operating temperature: -55 to 60C (-67 to 140F). Green LED ............ DC Red LED ............... AC Note: 1. In MY2N and MY3N, only the contact circuit is different from the illustration below. The coil terminals 10 and 11 of MY3N become (-) and (+), respectively. 2. Pay special attention to the polarities when using the DC type. 3. The AC coil-type is provided with a self-diagnostic function that detects a breakage in the coil. RC Circuit Specifications and dimensions same as the standard type with the following exceptions. The panel cutout dimensions are the same as those of the standard type. However, the height is higher by 17.02 mm (0.67 in). Terminal arrangement/ Internal connections (Bottom view) Note: 1. The above dimensioned drawing shows the 4-pole type. The dimensions of the 2- and 3-pole types are identical to the 4pole type. 2. Available on AC versions only. 3. Terminal arrangement/internal connections: MY2-Y is the same as the standard type; MY2N-Y is the same as the LED indicator type. 12 MY MY Characteristic Data Without RC circuit With RC circuit Push-to-test button MY 12 Note: Mounting holes When mounting the relay, use the connecting socket PYC-P2 shown in "ACCESSORIES" section. The mounting hole dimensions shown here are applicable to the relay with mounting stud. The dimension drawings show the 4-pole type. The dimensions of the 2- and 3-pole types are identical to the 4-pole type. Diode Surge Suppression Terminal arrangement/Internal connections (Bottom view) Specifications and dimensions same as the standard type with the following exceptions. MY4-D 6, 12, 24, 48 100/110 VDC Terminal arrangement/internal connections: MY2(N)D(2) is the same as the MY4(N)-D(2) with the exception of the contact configuration. MY4N-D2 6, 12, 24, 48 VDC MY4N-D2 100/110 VDC Ambient operating temperature: -55 to 60C (-67 to 140F). Note: 1. 2. 3. 4. Pay special attention to the polarities when using the DC type. The release time is somewhat longer, but satisfies the standard specifications of 25 ms. The reverse-breakdown voltage of the diode is 1,000 VDC. Available on DC versions only. Connecting sockets Use the standard MY4 (4PDT) sockets with the terminal arrangements listed below. Terminal arrangement/Internal connections (Bottom view) AC DC Note: 1. R is a resistor for ampere-turn compensation, and is incorporated in the relays rated at 50 VAC or above. 2. Pay attention to the polarity of the set and reset coils, as incorrect connection of positive and negative terminals will result in malfunctioning of the relay. 13 MY MY APPROVALS UL recognized type (File No. E41515) Type MY Contact form DPDT Coil ratings 6 to 240 VAC 6 to 120 VDC 3PDT 4PDT MY2K- DPDT 5 to 120 VAC 5 to 48 VDC Contact ratings 5 A, 120 VAC (Resistive) 5 A, 28 VDC (Resistive) 5 A, 240 VAC (Inductive) 5 A, 28 VDC (Resistive) 5 A, 240 VAC (Resistive) 3 A, 28 VDC (Resistive) 3 A, 120 VAC (Inductive) 1.5 A, 240 VAC (Inductive) 5 A, 240 VAC (Inductive, same polarity) 5 A, 28 VDC (Resistive, same polarity) 3 A, 240 VAC (Resistive) 3 A, 28 VDC (Resistive) CSA certified type (File No. LR31928) Type MY Contact form DPDT 3PDT 4PDT Coil ratings 6 to 240 VAC 6 to 120 VDC MY2K- DPDT 5 to 120 VAC 5 to 48 VDC Contact ratings 5 A, 28 VDC (Resistive) 5 A, 240 VAC (Inductive) 3 A, 28 VDC (Resistive) 3 A, 240 VAC (Inductive) 5 A, 240 VAC (Inductive, same polarity) 5 A, 28 VDC (Resistive, same polarity) 3 A, 240 VAC (General purpose) 3 A, 30 VDC (Resistive) LR (Lloyd's Register) approved type (File No. 563KOB-204524) Type MY Contact form DPDT 4PDT Coil ratings 6 to 240 VAC 6 to 120 VDC Contact ratings 2 A, 30 VDC (Inductive) 2 A, 200 VAC (Inductive) 1.5 A, 30 VDC (Inductive) 0.8 A, 200 VAC (Inductive) 1.5 A, 115 VAC (Inductive) SEV listed type (File No. D791/63 [2- & 4-pole], D791/91 [3-pole]) Type MY -SV Contact form DPDT 3PDT 4PDT Coil ratings 6 to 240 VAC 6 to 110 VDC Contact ratings 5 A, 220 VAC (Resistive) 5 A, 24 VDC (Resistive) Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, VDE, and SEV) may be different from the performance characteristics individually defined in this catalog. 2. In the interest of product improvement, specifications are subject to change. HINTS ON CORRECT USE When using the relay rated at 120 VAC at a supply voltage of 240 VAC, be sure to connect external resistors Rs and Rr to the relay. 14 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. Note: This datasheet is provided as a guideline for selecting products. Do not use this document to operate the Unit. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC * THE AMERICAS HEADQUARTERS Schaumburg, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE OMRON ARGENTINA * SALES OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 * www.omron247.com Cono Sur * 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE OMRON CHILE * SALES OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br Santiago * 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV * HEAD OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. * 52.811.156.99.10 * 001.800.556.6766 * mela@omron.com 54.11.4783.5300 (c) 2009 Omron Electronics LLC Cat. No. DS_MY_GCRLY6 09/97 Specifications are subject to change without notice.