3.0x1.0 mm INFRARED EMITTING DIODE PRELIMINARY SPEC Part Number: APECVA3010F3C Features Description z 3.0mmx1.0mm SMT LED, 2.0mm thickness. F3 Made with Gallium Arsenide Infrared Emitting diodes. z Mechanically and spectrally matched to the phototransistor. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1856 REV NO: V.1 DATE: MAR/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1203009101 Selection Guide Part No. APECVA3010F3C Dice Lens Type F3 (GaAs) Po (mW/sr) [2] @ 20mA Viewing Angle [1] Min. Typ. 21/2 0.7 2 120 WATER CLEAR Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR 10 uA VR = 5V Capacitance F3 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength F3 P 940 nm IF=20mA Spectral Bandwidth F3 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Symbol F3 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 C TSTG -40 To +85 C Storage Temperature Note: 1. 1/100 Duty Cycle, 10s Pulse Width. SPEC NO: DSAJ1856 REV NO: V.1 DATE: MAR/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1203009101 APECVA3010F3C SPEC NO: DSAJ1856 REV NO: V.1 DATE: MAR/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1203009101 APECVA3010F3C Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAJ1856 REV NO: V.1 DATE: MAR/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1203009101 PACKING & LABEL SPECIFICATIONS APECVA3010F3C SPEC NO: DSAJ1856 REV NO: V.1 DATE: MAR/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1203009101